WHWSD01 Temperature and Humidity Sensor
Product Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved for uncontrolled
environment - Minimum Distance: 20cm between radiator and body
Product Usage Instructions:
Installation:
- Ensure the device is placed in a well-ventilated area.
- Keep a minimum distance of 20cm between the radiator of the
device and your body. - Connect the device to a power source following the provided
guidelines.
Operation:
- Turn on the device using the designated power button.
- Follow the user manual for specific instructions on device
operation. - Monitor the device for any unusual behavior or signals of
interference.
FAQ:
Q: What should I do if I experience interference with the
device?
A: If you experience interference, try repositioning the device
to minimize external signals affecting its operation. Ensure no
other electronic devices are causing interference.
Q: Can I modify the device for better performance?
A: Any modifications not approved by the manufacturer may void
your warranty and affect the device’s compliance with FCC
regulations. It is recommended to use the device as intended
without modifications.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
 |
Wenhui WHWSD01 Temperature and Humidity Sensor [pdf] Instruction Manual WHWSD01, WHWSD01 Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor, Sensor |