WEINTEK CM3 Series Human Machine Interface User Guide
HMI Setting:
| Parameters | Recommended | Options | Notes |
| PLC type | Cimon CM3 Series | ||
| PLC I/F | RS232 | RS232/RS-485 2W | |
| Baud rate | 9600 | 9600 ~ 115200 | |
| Data bits | 8 | 7,8 | |
| Parity | None | None,Even,Odd | |
| Stop bits | 1 | 1,2 | |
| PLC sta. no. | 255 | 0 ~ 255 | |
Device Address:
| Bit/Word | Device type | Format | Range | Memo |
| B | X | DDh | 0 ~ 63f | |
| B | Y | DDh | 0 ~ 63f | |
| B | M | DDDh | 0 ~ 511f | |
| B | K | DDDh | 0 ~ 255f | |
| B | L | DDDh | 0 ~ 255f | |
| B | F | DDDh | 0 ~ 127f | |
| B | D_Bit | DDDDh | 0 ~ 9999f | |
| B | T | DDD | 0 ~ 511 | |
| B | C | DDD | 0 ~ 511 | |
| B | Q | DDDh | 0 ~ 511f | |
| W | D | DDDD | 0 ~ 9999 | |
| W | S | DD | 0 ~ 99 | |
| W | TS | DDD | 0 ~ 511 | |
| W | TC | DDD | 0 ~ 511 | |
| W | CS | DDD | 0 ~ 511 | |
| W | CC | DDD | 0 ~ 511 | |
| W | Z | DDDD | 0 ~ 1023 | |
| W | R | DD | 0 ~ 15 |
Diagram 1
RS-232
The serial port pin assignments may vary between HMI models, please click the following link for more information.
Diagram 2
RS-485 2W
The serial port pin assignments may vary between HMI models, please click the following link for more information.
Cimon CM3 Series
Supported Series: Cimon CM3 Series
Website: https://www.cimon.com/
Documents / Resources
 |
WEINTEK CM3 Series Human Machine Interface [pdf] User Guide CM3 Series, CM3 Series Human Machine Interface, CM3 Series, Human Machine Interface, Machine Interface, Interface |