WECOOL S2
SELFIE STICK TRIPOD
USER MANUAL
COMPATIBLE
 |
iOS | |
Android |
HOW TO USE
- Turn on: Press and hold the remote button for 3 seconds, until the LED indicator flashes blue, to turn on.
- Pairing mode: The LED indicator will flash every 2 seconds and automatically enter into the pairing Mode. Switch on the Bluetooth on your phone and select “WECOOL S2”. The LED Indicator will go out once the pairing is successful.
- Take a photo: Click the remote button to take a photo.
- Power off Press and hold the remote button for 3 seconds to power off.
Note: When disconnected from the phone, the selfie stick will automatically shut down without operation after 5 min. In pairing mode, it will automatically shut down without operation after 10 min.
REMOVE AND REPLACE THE REMOTE
CHANGING BATTERY
Prise apart the remote using a cutout in the bottom left corner
360 ROTATION
OPEN THE TRIPOD
TRIPOD MODE
In tripod mode, use the base of the telescopic pole in the center of the tripod to stabilize.
SPECIFCATION
- Main material: Stainless Steel
- Mount Holder: 60-98mm
- Collapsed Length: 194mm
- Extended Length: 1030mm
- Product weight: 155g
- Battery: CR1632(Replaceable)
Please keep battey away from direct sunlight, fire, or heating elements.
WARRANTY & AFTER SALES SERVICES
To Avail of the warranty, register your
purchase on our website www.wecool.in
within 10 days of purchase.
Feel free to contact our customer support on 9036228529
( Whatsapp or Call ) or Write to us at
support@wecoolimports.com
Scan here to register now.
Documents / Resources
 |
WeCool S2 Selfie Stick Tripod [pdf] User Manual S2 Selfie Stick Tripod, S2, Selfie Stick Tripod |
