Webcam User Manual

Webcam
User Manual

Features

Webcam -

Setting up your webcam
Place your webcam
Designed for the way you like to make a video call, place the webcam where you want it—on the monitor or the desktop.

Webcam - webcam

For placement on a monitor
Grasp the webcam as shown and open clip base with your other hand.

Mount the webcam, making sure the foot on the clip base is flush with the back of your monitor.

Webcam - monitor

Connect your webcam
Plug your webcam into the USB interface of a PC or TV STB. Wait for about 1 minute, the webcam will install automatically.

Webcam - Connect your webcam

Getting start with video calling
To take advantage of video calling, both you and the person you call must install™ video-calling applications such as Skype, Yahoo! @Messenger, Windows Live@ Messenger, or Gmail. As well as a USB camera and video calling application, both callers need;
A computer with a speaker (or a headset) and a microphone (your webcam has a built-in microphone);
A broadband Internet connection (e.g., DSL, T1, or cable);
Please check your preferred video calling application requirements. (Requirements may vary between different applications but usually, a minimum of 2Mbps upload speed is required);

Q&A:
Q: How do I know if my camera is recognized by the operating system?
A: Connect the camera to any USB2.0/3.0 port. Once the camera is connected, it takes few more moments before the
camera is recognized. To ensure the camera has been installed correctly, check the following:
under control panel>System and Security >System>Device Manager.
Q: How do I know if my video calling application is using my webcam?
A: All video applications have an option
setting to review the audio and video device.
Using the video application review the following:
The Audio selection to ensure the USB2.0 camera Microphone is selected.
If not change the selection to the USB2.0 camera.
The Video selection to ensure the USB2.0 camera is selected.
If not change the selection to the USB2.0 camera.
Q: How to judge USB webcam has already be installed well on your computer?
A:

  1. For Windows computer: Please go to “Computer Management”— “Device Manager”— “Cameras”.
    See the picture below. You can check if your computer recognizes USB webcam well.
    Webcam - or Windows computer
  2. For MAC: Please go to “Applications”— “Photo Booth”.
    See the picture below. You can check if your computer recognizes the USB webcam well.
    Webcam - ApplicationsWebcam - work on Skype,

Q: Why it does not work on Skype, Facebook?
A: Normally software like Skype, Facebook uses the integrated camera by default.
If you want to use a USB webcam, you need to go to video settings on software to select video resources.
Take Skype for example:
You need to go to “Settings” on Skype— “Audio&Video” to select a USB camera as the video resource. See the picture below.

Webcam - ormally software like Skyp

Documents / Resources

PDF thumbnailWebcam
User Manual · Webcam

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. The recorded sound on my camera is terrible. Is there anyway to make it better?

    Elizabeth Burns asks The recorded sound on my camera is terrible. Is there anyway to make it better?
    Manuals+ clarified question
    Question

    How can I improve the recorded sound quality of my webcam?

    Answer

    To improve the sound quality of your webcam recordings, please check the following settings based on the user manual:

    • Verify Microphone Selection: Ensure your recording or video calling software is specifically using the webcam's built-in microphone. In your application settings (such as Skype or Zoom), go to Audio & Video settings and ensure the USB2.0 camera Microphone is selected rather than your computer's internal microphone.
    • Check Connection: Ensure the webcam is fully plugged into a USB 2.0 or 3.0 port. If the sound is distorted, try a different USB port directly on the computer rather than a USB hub.
    • Software Adjustments: Many applications have an "Automatically adjust microphone settings" toggle. If your audio is too quiet or peaking, try toggling this setting to see if the software can level the sound better.
    • Physical Placement: Ensure the microphone hole on the webcam is not obstructed and that you are within a reasonable distance from the device while speaking.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.