waybasics logoBLOX CUBEwaybasics BLOX CUBE -figure 1

Included

waybasics BLOX CUBE -figure 2

waybasics BLOX CUBE -figure 3WARNING: CHOCKING HAZARD-Small parts NOT for children under 3 years

waybasics BLOX CUBE -figure 4
  •  Assemble your unit on a flat even surface
  • Make sure zBoard surfaces are clean and dry
  • Do not place the unit on its side or back as it will compromise it’s structural integrity
  • Indoor use only. Not in bathroom
waybasics BLOX CUBE -figure 5 waybasics BLOX CUBE -figure 6
1. Carefully remove the 3M protective layer from the adhesive. 2. Place alignment pins in vertical boards and backboard.
waybasics BLOX CUBE -figure 7 waybasics BLOX CUBE -figure 8
3. Start assembly from bottom to top.
Align vertical boards and backboard to holes in the horizontal board.		 4. Align horizontal board and press firmly to secure unit together.
waybasics BLOX CUBE -figure 9 waybasics BLOX CUBE -figure 10
5. When moving the unit, first empty contents. Lift the cube from the bottom zBoard to keep adhesives intact. 6. The Blox Storage Cube can be stacked for your custom configuration.
Enjoy building possibilities!

waybasics BLOX CUBE -figure 11Contact Us www.waybasics.com/contact
version 1220

Contents hide
1 Documents / Resources
1.1 References
2 Related Posts

Documents / Resources

waybasics BLOX CUBE [pdf] User Manual
waybasics, BLOX CUBE

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *