wavesrx logo

WavesRx PWC Fender Bumper and Soft Loop Cleats

WavesRx PWC Fender Bumper and Soft Loop Cleats

Product Specifications:

  • Model: XYZ Protection Cover
  • Material: High-quality durable plastic
  • Color: Black
  • Dimensions: 12 inches x 8 inches x 4 inches
  • Weight: 1 pound

Product Usage Instructions:

Unpacking and Inspection:

When you receive the XYZ Protection Cover, carefully unpack it and inspect for any damages or missing parts.

Installation:

To install the XYZ Protection Cover, follow these steps:

WavesRx PWC Fender Bumper and Soft Loop Cleats 1

  1. Identify a suitable location where you want to install the cover.
  2. Clean the surface to ensure proper adhesion.
  3. Peel off the adhesive backing and firmly press the cover onto the surface.

WavesRx PWC Fender Bumper and Soft Loop Cleats 2WavesRx PWC Fender Bumper and Soft Loop Cleats 3

Installing Larger U-Hooks (If Necessary):

If you need to install larger U-Hooks for additional support, follow these steps:

  1. Identify the areas where you want to install the U-Hooks.
  2. Use appropriate tools to securely attach the U-Hooks to the surface.WavesRx PWC Fender Bumper and Soft Loop Cleats 4 WavesRx PWC Fender Bumper and Soft Loop Cleats 5

Attach TriFenders® to Your PW C
To install a TriFender® on your Jet Ski, gently lower it until both U-Hooks at the bottom securely latch under the rub rail. Then, pull upward on the bungee cord to verify that the U-Hooks are firmly in place. Next, fasten the plastic hook at the end of the bungee to a preinstalled WavesRx® soft loop (included) or another suitable attachment point on your ski. Adjust the length of the bungee cord to maintain sufficient tension, ensuring the U-Hooks remain securely attached. Finally, secure the safety clip on the plastic hook to prevent accidental detachment and loss.WavesRx PWC Fender Bumper and Soft Loop Cleats 6

Maintenance:
Regularly clean the XYZ Protection Cover with a damp cloth to ensure its longevity and effectiveness.

Frequently Asked Questions (FAQ):

Q: Can the XYZ Protection Cover be used outdoors?
A: Yes, the XYZ Protection Cover is designed for both indoor and outdoor use, providing versatile protection.

Q: Can the cover be painted or customized?
A: While the cover can be painted, we recommend using high-quality paints suitable for plastics for best results.

Documents / Resources

WavesRx PWC Fender Bumper and Soft Loop Cleats [pdf] Installation Guide
PWC Fender Bumper and Soft Loop Cleats, Fender Bumper and Soft Loop Cleats, Bumper and Soft Loop Cleats, Soft Loop Cleats, Loop Cleats, Cleats

References

Leave a comment

Your email address will not be published. Required fields are marked *