WATCHDOG NXT600c Crawl Space Dehumidifier

How to Remove the Side Panels

Tools:

• Phillips Head Screwdriver
  – OR-
• #2 Phillips Drill (Optional)

1. Lift off the magnetic strip and set aside.
2. Pull on one of the black tabs to remove the prefilter.
3. Slide out the MERV-10 filter (the MERV-10 filter comes standard on the unit but you may also have a carbon or HEPA filter).
4. Remove the screws holding the side panel in place.
5. Lift off the side panel. Repeat on the other side, if necessary.

Seaira Global
14021 NC Highway 50
Surf City, NC 28445
www.seairaglobal.com

Documents / Resources

	WATCHDOG NXT600c Crawl Space Dehumidifier [pdf] User Manual NXT600c Crawl Space Dehumidifier, NXT600c, Crawl Space Dehumidifier, Space Dehumidifier, Dehumidifier
	WATCHDOG NXT600c Crawl Space Dehumidifier [pdf] Owner's Manual NXT600c Crawl Space Dehumidifier, NXT600c, Crawl Space Dehumidifier, Space Dehumidifier, Dehumidifier
	WATCHDOG NXT600c Crawl Space Dehumidifier [pdf] User Manual NXT600c Crawl Space Dehumidifier, NXT600c, Crawl Space Dehumidifier, Space Dehumidifier, Dehumidifier

References

• User Manual