VTech 80-163460 Kidi Magic Light Projector Speaker
INTRODUCTION
Thank you for purchasing the Kidi Magic Speaker ClockTM. This silly, fortune-telling alarm clock features soothing lighting that changes color! Tune in to your favorite radio station with the FM radio or plug in an external music player to listen to your own music. There are also relaxing melodies with soft lighting, creating a peaceful atmosphere. Change the color of the light and control the games by moving your hand above the magic sensors!
INCLUDED IN THIS PACKAGE
- One Kidi Magic Speaker ClockTM
- One 3.5mm jack audio cable
- One VTech® 5.5mm DC 7.5V power adapter
- One parent’s guide
CAUTION-ELECTRIC TOY: Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock..
WARNING:
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE:
- Please keep this parent’s guide as it contains important information.
- The toy is only to be connected to equipment of Class II (marked on the marking plate with a symbol.)
Unlock the packaging locks:
- Turn the packaging lock counterclockwise several times.
- Pull out and discard the packaging lock.
PRODUCT FEATURES
Screen Icons
Indicate the current status of each mode.
Clock
Press this button to enter Clock Mode or to go to Sleep Mode. When the clock is not in use, Sleep Mode will activate to save power.
Music
Press this button to enter Music Mode or exit to Clock Mode. If an external music player (not included) is connected, press this buttonto play music from that device.
FM Radio
Press this button to enter FM radio.
Games
Press this button to choose a game.
Alarm/Settings
Press this button to change any settings or to set the alarm.
Light
Press this button to change to a different light mode. Hold this button to change the light color.
Volume
Press this button to adjust the volume.
Direction Buttons
Press these buttons to make a selection.
OK Button
Press this button to confirm your selection. When in Clock Mode, press the OK button to hear the current time.
Time Projection Button
Press the big Time Projection Button on top to turn the time projection ON or OFF.
Projector Focus Ring
Turn this to adjust the focus of the time projection.
Note:
- We recommend using the time projection feature in a dimly lit room to get the best results.
- Projection Angle Adjuster
- Adjust the projection angle by rotating the adjuster.
Note:
- When adjusting the projector focus or angle, please be aware of the
- Time Projection Button as it is easy to accidentally press it.
Magic Sensor
Wave your hand above the Magic Sensor to see magic effects. Works only when
is shown on the screen.
WARNING
- Please keep your Kidi Magic Speaker ClockTM away from strong light or direct sunlight; it will interfere with the Magic Sensors.
- To avoid poor operation, please ensure there are no obstacles, such as a shelf, close to the top of the unit and that it’s not too close to a wall.
- If the sensor detects an obstacle that impedes the performance of the unit, you will see a warning icon on the screen
SPECIAL WARNING ICONS
Audio-In Jack
Plug in an external music player (not included) using the supplied audio cable to listen to music.
AC/DC Jack
Plug in a VTech® 7.5V DC power adapter here. FM Radio Antenna
FM Radio Antenna
To get the best radio reception, please take out the FM Radio antenna that is located in the cabinet at the bottom of the unit.
GETTING STARTED
BATTERY INSTALLATION
- Kidi Magic Speaker ClockTM uses 4 AA size batteries or a VTech® 7.5V adapter.
- Locate the base compartment cover at the bottom of the unit.
- Remove the base compartment cover.
- Locate the battery cover inside the base compartment.
- Remove the battery cover and install 4 AA size batteries as illustrated.
- Close the battery cover and the base compartment cover.
BATTERY NOTICE
- Use new alkaline batteries for maximum performance.
- Use only batteries of the same or equivalent type as recommended.
- Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable, or new and used batteries.
- Do not use damaged batteries.
- Insert batteries with the correct polarity.
- Do not short-circuit the battery terminals.
- Remove exhausted batteries from the toy.
- Remove batteries during long periods of non-use.
- Do not dispose of batteries in fire.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the toy before charging (if removable).
- Rechargeable batteries are only to be charged under adult supervision.
POWER ADAPTER CONNECTION
- To connect the adapter to the unit, follow the instructions below.
- Make sure no batteries remain inside the unit.
- Locate the 5.5mm DC jack on the side of the unit.
- Connect the power adapter into the unit’s 5.5mm DC jack.
- Plug the other end of the power adapter into an electrical socket.
- Turn the unit ON.
TRANSFORMER SAFETY NOTICE
- Using a VTech® adapter (DC 7.5V) is recommended.
- This toy shall only be used with a transformer for toys.
- The transformer is not a toy.
- This toy is not intended for use by children under 3 years old.
- Do not connect this toy to more than the recommended number of power supplies.
- Never clean a plugged in toy with liquid.
- Please regularly examine the transformer, checking for damage to the cord, plug, transformer or other parts. Do not use the transformer if there is any damage to it.
Note:
If the unit stops working or the sound becomes weak, it may be because of a fault with the power adapter connection. Unplug the adapter for 15 seconds. Then plug the adapter back in and turn the unit ON. If the problem persists, the adapter you are using may be faulty.
TO BEGIN USING THE KIDI MAGIC SPEAKER CLOCK™
Initial Set-Up
Press any button to turn the unit on. When the unit is first turned on, you will be asked to set the time and date.
Time Set-Up
- The default time is 08:00 in 24 hour mode.
- Press the OK Button to highlight the next item: hours, minutes, AM/PM (only in 12-hour mode)
12/24 hr
- Press the
Direction Buttons to adjust the value. - To save the current settings, press the OK Button while highlighting the check mark icon
Or you can press the Direction Buttons to choose the reset icon
to reset the time and to change it to 12-hour mode.
DATE SET-UP
The default date is 31/01/16 in DD/MM/YY format.
- Press the OK Button to highlight the next item: day, month, year, date format (DD/MM/YY or MM/DD/YY)
- Press the Direction Buttons to adjust the value.
- To save the current settings, press the OK Button while highlighting the check mark icon Or you can press the Direction Buttons to choose the reset icon to reset the date or to be able to select MM/DD/YY format.
FEATURES
Standby Mode
To preserve battery life, the Kidi Magic Speaker ClockTM will automatically enter standby mode if there is no operation for a short period of time. You can also press the Clock Button to go into standby mode if you are already in Clock Mode. The current time will display even in standby mode. Press any button to wake the unit up.
Magic Sensor Control
The Magic Sensors detect hand movement directly above them. Wave your hand above the sensors to activate them. You can select different light effects and play the games using them. The Magic Sensors are available only if the Magic Sensor Icon is shown at the top of the screen.
Light Control
Press the Light Button
to switch between body light on, screen light on only, lights off. Hold this button for approximately 1-2 seconds to enter the advanced light settings. Here your can choose different light colors and effects. You cannot enter the advanced light settings menu in FM Radio Mode. There are more than 12 light effects for you to choose from. You can also choose a particular color that will stay on the screen and body. There are also different lighting patterns to choose from in different activities:
Color Effect Selection
- Use theDirection Buttons or wave your hand above the
- Kidi Magic Speaker ClockTM to change the light effect.
- Press the Light Button again to save the current settings and go to that mode.
Projection Control
A projector is located on the top of the Kidi Magic Speaker ClockTM. It allows the current time to be projected onto the ceiling. Press the Projection Button
to turn the time displayed onto the ceiling on or off. By default, the clock display is set to eight seconds. If the time projection auto turns off, press the Projection Button again to turn it back on. The optimal focus range of the time projection is between 20 inches and eight feet. Rotate the Projector Focus Ring clockwise or counterclockwise to adjust the focus of the projection display. Rotate the Projection Angle Adjuster to adjust the projection angle.
Volume Control
Press the Volume Button
to adjust the volume. Use the Direction Buttons to decrease or increase the volume. Press the Volume Button again or any function button to save the current settings.
Long-Time Light on Feature
There is a long-time light on feature for the Kidi Magic Speaker ClockTM. You can set the light to stay on for a long time in some modes when an adapter is being used. We recommend the use of an adapter whenever possible. If you are using batteries, the long-time light on feature will not be available. To use this feature, please refer to Auto-Off Timer in the Settings section in this manual.
ACTIVITIES
Clock
- Press the Clock Button to go to Clock Mode. It will display the current time on screen. The light will turn on for a short time with it.
- Wave your hand left and right above the Kidi Magic Speaker ClockTM to change the light effect.
- Press the Direction Buttons to change the time display style.
- Press the OK Button to hear the time spoken aloud.
Music
- There are six relaxing melodies paired with soothing light effects that create a peaceful atmosphere for you to relax or to sleep.
- Wave your hand left and right above the Kidi Magic Speaker ClockTM to change the light effect.
- Press the Direction Buttons to cycle through and select the melodies.
- Press the OK Button to see different animations.
FM Radio
- In this mode you can listen to your favorite FM radio stations. The frequency range is 87.5 – 108 MHz.
- Press the Direction Buttons to manually search through the frequency range.
- Hold the Direction Buttons to auto search for a channel.
- Press the OK Button to select different radio display styles.
Note:
- To get good radio reception, please take out the antenna from the cabinet at the bottom of the unit.
- In FM Radio Mode, only the screen will light up, not the main light.
- After a short while, the screen display will dim. To make it brighter, press any button.
- The light effect can’t be changed in FM Radio Mode to help increase the reception.
Games
There are six games for you to play in the Kidi Magic Speaker ClockTM. Use the Direction Buttons to choose a game, then press the OK Button to start playing.
Silly Fortunes
Let the Kidi Magic Speaker ClockTM tell your fortune by asking it a yes or no question. Place your hand above the Kidi Magic Speaker ClockTM or hold the OK Button to ask a yes or no question. Your question will be answered when you move your hand away or release the OK Button.
Friendship Meter
Are you and your friend truly the best of friends? Let the Kidi Magic Speaker ClockTM help you find out! Choose a picture representing yourself and your friend by pressing the Direction Buttons or waving your hand, then choose a card from a selected deck of cards by pressing the Direction Buttons or waving your hand. The Kidi Magic Speaker ClockTM will analyze the pictures and the selected card, then determine what kind of a friendship you have.
Daily Horoscope
Here you can find out how lucky you will be today. Put your hand above the Kidi Magic Speaker ClockTM and let it sense your hand. Choose your favorite pictures or objects by pressing the Direction Buttons and the OK Button or wave your hand to choose.
Sweet Collector
Different sweet shapes will fall down one by one, make sure the candies fall into the correct jar. Press the Direction Buttons or wave your hand above the Kidi Magic Speaker ClockTM to move the candy. Press the OK Button to drop the candy.
Flying Fruit Salad
Remember the fruit shown at the beginning, then slice it each time it appears on the screen to make a fruit salad. Press the OK Button or wave your hand above the Kidi Magic Speaker ClockTM to cut the fruit. The game will get faster and faster, so try your best to cut the correct fruit and make a delicious salad.
Magic Potion Memory
Collect different herbs to make a magic potion! One type of herb will be briefly displayed, then lots of different herbs will appear. Select the herb shown at the beginning of the game to finish the potion. Press the OK Button or wave your hand above the Kidi Magic Speaker ClockTM to collect the herbs.
External Music Connection
Plug in an external music player (not included) to the Kidi Magic Speaker clock and listen to your own music! You can play the games when an external music player (not included) is connected but the relaxing music function will be disabled. You can see animations on the screen by pressing the Music Button.
Note: Please disconnect your external music player (not included) and the audio cable from the Kidi Magic Speaker ClockTM if you do not want to listen to music.
Note:
- The Volume control on the Kidi Magic Speaker ClockTM cannot control the volume of external devices.
- There are more light effects to accompany External Music Mode to choose from. Wave your hand above the Kidi Magic Speaker ClockTM or hold the light button to choose.
- The auto-off timer can be adjusted in the relevant settings and will switch only the Kidi Magic Speaker ClockTM into standby mode. External devices will not be affected.
Settings
In this mode, you can change the below settings:
- Alarm clock
- Brightness
- Sparkling star projection
- Projection orientation
- Auto-off timer
- Time
- Date
Alarm Clock
There are two alarms for better time management: alarm 1
and alarm 2 
To Set the Alarm
- Choose the desired alarm by pressing the Direction Buttons and the OK Button.
- When in the alarm time setting screen, press the Direction Buttons to change the value and to turn the alarm on/off.
- Press the OK Button to go to the next item: hours, minutes, AM/PM (Available only in 12-hour mode), alarm on/off, ring tone
- To save the current settings, press the OK Button when highlighting the check mark icon. If you wish to change anything, you can press the Direction Buttons to choose back and choose the edit icon to set the alarm again.
Stop the Alarm Ringing
- To turn the alarm off, choose the
icon and press the OK Button. - When the alarm is ringing, press any activity button or wave your hand above the unit to go to snooze mode.
- The alarm will ring again after five minutes for up to three times.
Brightness
Press the Direction Buttons to set the brightness. Press the OK Button to save it.
Sparkling Star Projection
Here you can turn the projected sparkling star animation on or off. Press theDirection Buttons to choose to turn it on or off, then press the OK Button to save it. The default setting is time display with the sparkling star animation on.
Note: For the best reception in FM Radio Mode, stars will not sparkle.
Projection Orientation
The time projection can be reversed for easy viewing. Press the Direction Buttons to change the time display orientation. The default setting is Mode 1.
Mode 1
This orientation is used for desk side view. When you are playing games or listening to the radio or music, the time will be easily viewed on the ceiling in the correct orientation.
Mode 2
This orientation is used for bedtime view. When you are lying in bed, the time will be easily viewed on the ceiling in the correct orientation.
Auto-Off Timer
You can set the amount of time the light is on in Clock Mode and the auto-off timer for FM radio and music.
Clock Light
Press the Direction Buttons to select the desired length of time: 8 seconds, 30 minutes, 60 minutes or disable auto off. The disable auto-off option is only available when an adapter is in use.
FM Radio
Press the Direction Buttons to select the desired length of time: 60 minutes, 120 minutes, 240 minutes or disable auto off. The disable auto-off option is only available when an adapter is in use.
Music
Press the Direction Buttons to select the desired length of time: 30 minutes, 60 minutes, 120 minutes or disable auto off. The disable auto-off option is only available when an adapter is in use.
Time Set-up
- The default time is 08:00 in 24-hour mode.
- Press the OK Button to highlight the next item: hours, minutes, AM/PM (only in 12-hour mode)12/24 hour
- Press theDirection Buttons to adjust the value.
- To save the current settings, press the OK Button while highlighting the check mark icon Or you can press the Direction Buttons to choose the reset icon to reset the time or go to the top of the options to select 12-hour mode.
Date Set-up
The default date is 31/01/16 in DD/MM/YY format.
- Press the OK Button to highlight the next item: day, month, year, date format (DD/MM/YY or MM/DD/YY)
- Press the Direction Buttons to adjust the value.
- To save the current settings, press the OK Button while highlighting the check mark icon Or you can press the Direction Buttons to choose the reset icon to reset the date.
- Note: Time and date will be reset if there is no power supply to the unit. You need to reset the time and date after installing new batteries or attaching a power supply.
- Select the reset icon to be able to change the date format to MM/DD/YY.
CARE & MAINTENANCE
- Handle the device carefully.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Keep the device out of dusty or dirty areas.
- Keep the device out of moisture or extreme temperature.
- Do not disassemble the device. If a problem occurs, remove and replace the batteries to reset the device, or try new batteries.
- Do not drop the device on a hard surface and do not expose it to or immerse it in water.
TROUBLESHOOTING
| Problem | Possible Cause | Correction | |
| Your | Incorrect battery | Ensure that the batteries | |
| Kidi Magic | polarities | are installed correctly. | |
| Speaker ClockTM Has Stopped
Working or |
|||
| Weak batteries | Replace with new batteries. | ||
| AC/DC connection | Ensure that the adapter | ||
| Does Not Turn | problem | connection is ok. | |
| On. | |||
| FM Radio | Weak batteries | Replace with new | |
| Is Unclear, | batteries. | ||
| with Gritty Interference | |||
| Weak radio reception | Take out the antenna from cabinet on the back of the | ||
| unit. | |||
| Weak radio reception | Place the unit nearer to a | ||
| window that has an open | |||
| and unobstructed view. | |||
| Magic Sensors | Weak batteries | Replace with new | |
| Not Functioning | batteries. | ||
| Properly | |||
| Strong light | Keep unit away from | ||
| disturbance | strong light. | ||
| Interference by other | Keep unit away from | ||
| objects, e.g. wall, | anything blocking the | ||
| ceiling, book shelf, | sensors located above or | ||
| cabinet, etc | close to the Kidi Magic | ||
| Speaker ClockTM. | |||
| Time Projection | Out of focus | Rotate the Projector | |
| Not Clear | Focus Ring clockwise or | ||
| counterclockwise to adjust | |||
| the focus of projection | |||
| display. | |||
| Dirty projector lens | Wipe the lens with a clean, | ||
| dry cloth. |
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com and filling out our Contact Us form located under the Customer Support link. A service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com and filling out our Contact Us form located under the Customer Support link with any problems and/or suggestions that you might have. A service representative will be happy to help you.
FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help
Supplier’s Declaration of Conformity
- Trade Name: VTech®
- Model: 1634
- Product name: Kidi Magic Speaker ClockTM
- Responsible Party: VTech Electronics North America, LLC
- Address: 1156 W. Shure Drive, Suite 200,
- Arlington Heights, IL 60004
- Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Please examine the toy transformer periodically for conditions that may result in the risk of fire, electric shock, or injury to persons (such as damage to the output cord, blades, housing, or other parts) and that, in an event of such conditions, the transformer should not be used until properly repaired.
FAQS
Do people still use radio alarm clocks?
Most people rely on alarms to wake up and start their days. It’s why radio alarm clocks remain such a valuable commodity, even with almost everyone having a smartphone
What is the best color for a Vtech alarm clock?
Ten define the letters. Most sizes are available in your choice of red, amber, green, blue or white. In typical locations, most people consider red to be the most visible color. In dimmer light, amber and green tend to be more pleasing and less distracting.
What color wakes you up in the morning?
Blue light has the strongest impact. Exposure to blue light (and white light, which contains blue light) during the sensitive period can make it difficult for you to fall asleep and stay asleep. Exposure to white light during the day can have positive effects, including boosting alertness and mood.
How long do digital alarm clocks last?
How Long does an Android Alarm Ring? An Android has a default alarm duration of 10 minutes. Unlike the iPhone, you can change how long an Android alarm rings for. You can change the ‘silences after’ setting in the settings tab related to the alarm.
What color of Vtech clock is best for sleep?
Red light is by far the best calming light color for sleep. Choosing a red light as a nightlight ensures that you don’t disrupt your circadian rhythm. So switching to a red light a few hours before going to bed will surely help you fall asleep easier
What is digital alarm clock?
A digital clock is a type of clock that displays the time digitally (i.e. in numerals or other symbols), as opposed to an analogue clock.
Is it better to set an alarm or wake up naturally?
“Your internal body clock will strengthen and you will start to wake naturally at a time that suits you. However, if not setting an alarm is going to make you anxious about sleeping in and missing a train or an important meeting, you should set the alarm
Switch the ALARM MODE to RADIO or BUZZ. to set your desired alarm sound. The alarm time appears for a few seconds and the. icon appears on the display. Press SET ALARM TIME – or + button. repeatedly to set your desired time. To set the hour quickly, hold down the SET ALARM TIME – or + button.
Why do I keep sleeping through my alarms?
Sleeping through the alarm is fairly common. You might do this for a number of reasons: you are not getting enough sleep, your sleep schedule is off (which means your inner alarm system is off), or you may have a poor mindset
What color makes you tired on the Vtech alarm clock?
Your best bet would be a red led light. It’s the least disruptive among all wavelengths when it comes to sleep. At the same time, some research indicates that the low color temperature of red light can have a soothing effect on the body.
How do I reset my Vtech alarm clock?
In most cases your alarm clock can be reset using the following method: Unplug the alarm clock radio. Use a small screwdriver to take the battery cover off of the bottom. Remove the battery, wait 10-20 seconds and replace it.
What are the 2 dots on a clock called?
It’s a colon; this is one of its uses. It’s a colon
What are the advantages of Vtech alarm clock?
Digital clocks come with more features than their analog counterparts. Digital clocks provide superior readability during tense, time-sensitive scenarios, and some digital models can help people track the time with the help of a countdown timer. They can help to get students to their next classroom on time
How can I tell am PM from the clock?
The 12-hour clock method defines all 24 hours of the day using the numbers 1 to 12, followed by am or pm. 5 AM is early in the morning and 5 PM is late in the afternoon; 1 AM is one hour after midnight, and 11 PM is one hour before midnight.
Why is my Vtech alarm clock not working?
Step 1: Launch the Settings and click on Apps and Notifications. Step 2: Now, click on the Clock app and then further tap on Storage. Step 3: Finally, tap on Clear Cache and Clear Storage, one by one. A simple restart will conclude the steps and resolve the Android alarm no sound issue
