VST Double Door Sensor Switch User Manual

VST Double Door Sensor Switch

About this item,
【Tip】[Tip] This switch is compatible with both 12V and 24V lights. However, the original connector is a 12V JST male and female plug, which cannot be directly connected to VST’s 24V driver. The product includes 12V to 24V conversion cables, allowing you to connect the conversion cable first and then link it to the 24V power supply or light fixture.

【High Sensitivity The sensor switch can be triggerred by wood, glass and acrylic. the maximum detective distance: Black wood: 50mm, Grey wood: 80mm, Brown Wood: 130mm, White wood: 150mm, Brown glass: 60mm, Clear acrylic: 80mm.
【Smart Control The sensor switch is triggerred by door open and close. keep one door open or two doors open, the ligh is on. Both doors close, the is off. The double door sensor is used to control12VDC/24VDC cabinet, wardrobe and closet LED lights.
【Wide Application The door sensor switch is surface mout and easily to installation. it can be used to control led lights in cabintet, closet, wardrobe, cupboard etc.
【Energy Saving】 If you forget to close the door, the light will automatically turn off after one hour. A retrigger is required to work properly.
【Reliable After-sales Service】 Provide 2-year after-sales service, contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation, we will try our best to help you.

Specifications

Features & Specs

Operation Mode	ON-OFF
Current Rating	3 A
Operating Voltage	12 volts
Contact Type	Normally Open
Connector Type	Jst 12v
Switch Type	MOSFET
Terminal	Jst 12v
Circuit Type	1-way
Mounting Type	Surface Mount
Number of Positions	2
Control Method	Sensor
Connectivity Protocol	X-10
Wattage	60 watts
Control Type	door-activated
Compatible Devices	LED Lights