VOX EBC 410DB Built In Vitroceramic Hob Instruction Manual

Before using the hob, ensure it is correctly installed according to the installation instructions provided in the manual. Make sure it is securely fixed in place and connected to the power supply.

2. Power On:

Turn on the hob by pressing the power button. The control panel should light up, indicating that it is ready for use.

3. Setting the Cooking Zones:

Use the touch controls to select the desired cooking zone. You can adjust the heat level for each zone independently.

4. Cooking:

Once the cooking zone is selected and heat level adjusted, place your cookware on the zone. The hob will heat up the cookware evenly for cooking.

5. Cleaning and Maintenance:

After use, ensure the hob has cooled down before cleaning. Use a soft damp cloth with mild detergent to clean the surface. Avoid abrasive cleaners that may damage the glass surface.

Safety Instructions

General Safety Warnings

This device can be used by children aged 8 and above and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children should not play with the device. Cleaning and maintenance should not be done by children without supervision.

WARNING: The device and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age should be kept away unless continuously supervised.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire. NEVER try to extinguish a fire with water, but switch off the device and then cover the flames with a lid or fire blanket.

WARNING: Fire hazard: Do not store items on the cooking surfaces.
WARNING: If the surface is cracked, switch off the device to avoid the possibility of electric shock.

For hobs with a lid, any spillage should be removed from the lid before opening. Also, the hob surface should be cooled before closing the lid.
The device is not intended to be operated by means of an external timer or separate remote-control system.

Additional Safety Warnings

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass or other surfaces as they can scratch the surface, which may result in shattering of the glass.

Do not use steam cleaners to clean the device.

Installation Safety Warnings

Your device is manufactured in compliance with applicable local and international standards and regulations.
Maintenance and repairs must be performed only by authorized personnel. Installation and repairs carried out by unauthorized persons can pose a danger to the user. Dangerous modifications and alterations to the device are not allowed.

Before installation, ensure that local distribution conditions (nature and pressure of gas and voltage) and the adjustment of the device are compatible. The adjustment conditions for this device are stated on the label.
CAUTION: This device is designed for cooking food and is intended for domestic use only. It should not be used for any other purpose, such as heating a room.

Take care to avoid damage to the glass surface. Avoid hitting the glass with hard objects.
Ensure that the power cable is not pinched or damaged during installation. If the power cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

Do not use the device if it is damaged. Contact an authorized service agent.
Materials around the device (kitchen elements) must withstand temperatures of at least 100°C.

During use, the device becomes hot. Care should be taken to avoid touching heating elements inside the oven.
Do not place flammable materials on or near the device during operation.
Do not leave the hob unattended while cooking with oil or fat. They can catch fire if overheated.
Always use the center of the zone for cooking and turn the handles of the pots and pans inward to prevent them from being knocked over.
If you are not using the device for a long period, disconnect it from the power supply. Keep the main switch off when not in use.
Ensure that the control switches are in the “0” (off) position when the device is not in use.
During cleaning and maintenance, always disconnect the device from the power supply. You can do this by turning off the main switch.
Do not use the control buttons to clean the control panel.

To maintain the efficiency and safety of your device, we recommend using only original spare parts and calling an authorized service agent in case of emergency.

Installation

Electrical connection of the hob must be performed only by authorized personnel or a qualified electrician, and in accordance with the instructions in this manual and the regulations on voltage.

Before installation, ensure that local distribution conditions (nature and pressure of gas and voltage) and the adjustment of the device are compatible. The adjustment conditions for this device are stated on the label.
Comply with the laws, regulations, directives, and standards applicable in the country where the device is used (safety regulations, proper recycling, etc.).

Determining the Location for Installing the Built-in Hob

After removing the packaging from the device and its accessories, ensure that the hob is not damaged. If you suspect any damage, do not use the device and immediately contact authorized service personnel or a qualified electrician.

This built-in hob must be inserted into an opening on the worktop. It is electrically connected through a specially designed junction box located below.

Usage

Turn the device on and off
Select the heater

Activate double and triple zones
Adjust cooking power with and without boost
Turn off individual heaters

Timer function
Button lock
Child lock

“Stop & Go” function

Safety Instructions for the Sensor Control Panel

Safe sensor deactivation

Deactivation in case of excessive temperature
Operating time limitations
Residual heat functions

Cleaning and Maintenance

Always disconnect the device from the power supply before cleaning or maintenance. You can do this by turning off the main switch.

Do not use the control buttons to clean the control panel.

FAQs

Can I use any type of cookware on this hob?

It is recommended to use cookware with flat bottoms suitable for ceramic hobs for best performance and safety.

How do I turn on the hob?

Press the power button on the control panel to turn on the hob.

How do I activate the child lock?

Press and hold the child lock button for a few seconds until the indicator light turns on.

What should I do if the surface is cracked?

Immediately turn off the hob and contact authorized service personnel to avoid the risk of electric shock.

Can I use abrasive cleaners on the hob?

No, do not use harsh abrasive cleaners or sharp metal scrapers as they can damage the surface.

How do I clean the hob?

Disconnect the hob from the power supply and use a soft cloth with mild detergent to clean the surface. Avoid using the control buttons for cleaning.

View Fullscreen

Documents / Resources

VOX EBC 410DB Built In Vitroceramic Hob [pdf] Instruction Manual
EBC 410DB, EBC 411DB, EBC 410DB Built In Vitroceramic Hob, EBC 410DB, Built In Vitroceramic Hob, In Vitroceramic Hob, Vitroceramic Hob, Hob

References

User Manual

VOX EBC 410DB Built In Vitroceramic Hob

Specifications

Product Usage Instructions