Vortex Spas Nitro Pool Spas
Interactive tech sheet
- This interactive tech sheet contains clickable links and QR codes that provide instant access to specific information related to Vortex™ Spas or Swim Spas.
- Simply click or scan these QR codes to dive deeper into the features, maintenance tips, and expert advice tailored just for you.
- When you see these icons, you can click or scan:
Click on QR code
Scan QR code
We hope you find the information helpful. Please get in touch if you have any questions about any Vortex™ Spas product. We are here to help!
From the Vortex™ Spas Team.
FEATURES
Build
- PermaFrame™ Timber-free construction with a Lifetime Warranty
- Superior USA-made Aristech™ acrylic for added peace of mind
- Thermobond™ 4-Layer shell construction for superior durability
- Nine colour combinations to suit your preferences
- Duraflex™ ‘No kink’ PVC plumbing ensures no plumbing worries
- Thermoclad™ Maintenance-free cabinet
- ThermoLock™ Dual layer insulation to reduce energy consumption
- ThermoLock™ High Impact moulded ABS base
- Hydroflow™ Stainless steel bearing-less jets for long life
Control
- SpaNet™ Premium control systems with dynamic thermal tuning for energy savings
- Premium SpaNet™ Touchpad for ease of use
Lighting
- Hydroglow™ Underwater LED floodlight
- Hydroglow™ LED backlit water cascade to set the scene
- Hydroglow™ Programmable lighting for full control
- Hydroglow™ Jet & topside control lighting
- Hydroglow™ Perimeter & cabinet lighting
- Hydroglow™ Backlit drink holders
- Hydroglow™ Backlit laminar jets
Water Care
- Purezone™ AOS System with UV and ozone automatic water care
- Purezone™ Micro-filtration for effortless water clarity
Hydrotherapy
- Neck Therapy Collar™ to melt away back and shoulder tension
- Twin Hydrotherapy lounger so there’s no arguing over the
favourite seat
Individual seat pressure controls for a tailored hydrotherapy
experience
- High-Pressure Volcano jet for targeted hydro-massage
- Adjustable spa jets for customised massages
Optional Extras
- Vortex™ Audio WiFi Kit—Control your spa and enjoy your favourite music or podcasts
- SmartLINK™ WiFi Module—Remotely monitor and control your spa
- EcoCube™ Heat pump—Save up to 75% on spa heating costs in winter ,and cool your spa in summer
WARRANTIES
- Frame……………………………………………………………………………………………………………………….. Lifetime
- Shell structure…………………………………………………………………………………………………………..10 yrs
- Acrylic surface…………………………………………………………………………………………………………… 5 yrs
- Jets, plumbing & heater ………………………………………………………………………………….. 5 yrs
- Pumps & equipment………………………………………………………………………………………………5 yrs
Heights
| Nitro™ | Nitro HP™ | ||
| Model dimensions | 2.30(L) x 2.30(W)m | 2.30(L) x 2.30(W)m | |
| A | Total height | 0.92m | 0.92m |
| B | Product height under lip +-20mm | 825mm | 825mm |
| C | Height to bottom of health light +-25mm | 620mm | 630mm |
Jet Specifications
- Dimensions: 2.30 x 2.30 x 0.92m
Nitro Hydroplus™
Hydroplus model, provides you with a superior hydrotherapy experience. Conditions apply. Specifications may change without notice. Pictures may show options not available on all models.
Specifications Table
| Nitro™ | Nitro Hydroplus™ | |
| Water capacity | 1,438L | 1,517L |
| Dry weight | 391kg | 418kg |
| Filled weight (incl cover) | 1,847kg | 1,953kg |
| Lift weight | 501kg** | 533kg** |
| Intuitive spa controller | SV2 | SV3 |
| Programmable circulation pump | 1 | 1 |
| Jet pumps | 1 | 2 |
| Variable speed air blower | 1 | 1 |
| Variable output heater | 3kW max | 5.25kW max |
| Recommended electrical supply | 15 amps*** | 32 amps |
The specified Lift weights in the table above include the spa’s dry weight, packaging, and hard cover. These are approximate weights and are intended as a guide only. All weights must be checked by the crane operator before the lift. (Cranes can check the weight)
This spa model has pre-installed power lead.
The lead is five meters long, measured from the controller inside the spa (not from the spa cabinet), which allows it to extend approximately three meters from the controller side, where the keypad is located. If you plan to install the power outlet on the opposite side of the spa, please account for the length of the lead, as it may be too short. Extending or replacing the lead is the responsibility of the spa owner and must be done by a licensed electrician. Conditions apply. Specifications may change without notice. Pictures may show options not available on all models.
Equipment Location
Conduit access should be no more than 100mm high above the concrete slab.
Note: This model has a rigid base, and if you choose to bring the piping conduit in from the bottom through the base, you will need to cut a hole into the base on-site before installation. The factory does not provide this hole. Please see the diagram above to find the location where you can drill the hole.
Equipment Location
Conduit access should be no more than 100mm high above the concrete slab.
Note: This model has a rigid base, and if you choose to bring the piping conduit in from the bottom through the base, you will need to cut a hole into the base on-site before installation. The factory does not provide this hole. Please see the diagram above to find the location where you can drill the hole.
Standard Spa Cover
Vortex Spas™ Certificates
To access the Vortex Cobalt™ Generic Concrete Slab/ Plumbing/ Structural Certificates, please click or scan the QR code associated with each model.
Click on QR code
Vortex™ Spas Portables Generic Concrete Slab Certificate
Scan QR code
Vortex Nitro™ Plumbing approval
Vortex Nitro HP™ Plumbing approval
Vortex Nitro™ and Nitro HP™ Structural certificate
Vortex Spas™ Limited Warranty
To access the Vortex Spas™ Limited Warranty:
Click on QR code
Scan QR code
Vortex Spas™ 2024 Limited Warranty
Vortex Spas™ Pre-2024 Limited Warranty
To access more information about Vortex™ spa:
Click on QR code
Scan QR code
Vortex Spas™ Owner’s Manual
Vortex Spas™ Audio WiFi Manual
Documents / Resources
 |
Vortex Spas Nitro Pool Spas [pdf] Instruction Manual VXSSTP180225INT, NitroTM, Nitro HPTM, Nitro Pool Spas, Nitro, Pool Spas, Spas |