VONYX-logo

VONYX KBS03 Double X Keyboard Stand

VONYX-KBS03-Double-X-Keyboard-Stand-productCongratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Keep the manual for future reference.

UNPACKING INSTRUCTION

Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging.

STAND ASSEMBLY INSTRUCTIONS

Follow these steps to assemble the double X keyboard stand:

  1. Identify all the stand components.
  2. Attach the support arms to the main frame.
  3. Adjust the height of the stand to your desired position within the min and max height range.
  4. Ensure that all locking mechanisms are securely in place.
  5. Place your keyboard on the stand securely.

VONYX-KBS03-Double-X-Keyboard-Stand- (1)

TECHNICAL SPECIFICATION

  • Material : Metal
  • Dimensions: Folded : 470 x 80 x 990mm
  • Dimensions: Min height : 80mm
  • Dimensions: Max height : 900mm
  • Max. weight load per piece : 20kg
  • Weight : 3,65kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject.

Specifications and design are subject to change without prior notice. www.tronios.com Copyright © 2024 by Tronios The Netherlands

Frequently Asked Questions

  1. Can this stand accommodate all keyboard sizes?
    The stand is designed to accommodate most standard keyboard sizes. However, please check the dimensions of your keyboard against the stand’s specifications to ensure compatibility.
  2. Is it possible to adjust the width of the stand?
    No, the width of the stand is fixed for stability and load-bearing capacity reasons.

Documents / Resources

VONYX KBS03 Double X Keyboard Stand [pdf] Instruction Manual
KBS03, KBS03 Double X Keyboard Stand, Double X Keyboard Stand, Keyboard Stand, Stand

References

Leave a comment

Your email address will not be published. Required fields are marked *