VOLLRATH CT4 Conveyor Toasters
Product Information
Specifications:
- Model: CT4 Families
- Power: 120V for drive motors
- Terminal Blocks: Five-position and two-position
- Website: www.vollrath.com
Product Usage Instructions
Drive Motors Connection:
- For 120V Drive Motors: Ensure only two leads from the coil are connected.
- For 208-240V Drive Motors: Use black & white leads for 208V, black & blue for 220/240V, and cap off the unused third wire.
Fan Motor and Switch:
- Connect the fan motor to the terminal blocks following the labeled positions for T1, T2, B1, and B2.
- Use the fan switch for controlling the fan speed.
Wire Connection:
- Follow the wire diagram provided, connecting wires #1, #2, and #4 as indicated.
- Do not use wire #3 as specified.
WIRE DIAGRAM, CT4 FAMILIES
FAQ
Q: Can I use wire #3 for any connections?
A: No, wire #3 should not be used as per the instructions provided in the manual.
Q: How many leads are required for the drive motors?
A: For 120V drive motors, only two leads from the coil are needed. For 208-240V drive motors, use specific leads based on voltage and cap off the unused third wire.
Q: Where can I find more information about the product?
A: Visit our website at www.vollrath.com for additional resources and support.
Documents / Resources
 |
VOLLRATH CT4 Conveyor Toasters [pdf] User Manual CT4 Conveyor Toasters, CT4, Conveyor Toasters, Toasters |