VIVOSUN AeroZesh S Temp Humidity WiFi Controller User Manual

QUIET PWM EC MOTOR: Provides low noise and energy saving.
EFFICIENT AIR FLOW: Delivers efficient airflow with
hydro-mechanical stator blades in high static pressure.

SPEED CONTROL & ON/OFF CYCLE: Offers 10-level speed control
and three ON/OFF cycle modes via E12 controller.
DUAL BALL BEARINGS: Provides an estimated 67,000 hours lifespan
and enables mounting in any direction.

MULTIPLE MODES: Includes Manual, ON/OFF cycle, and intelligent
Auto modes for quick setup via VIVOSUN GrowHub.
WI-FI & APP CONTROL: Allows smart settings based on
variable environment conditions via GrowHub and VIVOSUN App
remotely.

Product Contents

VSV-AZS4/VSV-AZS6/VSV-AZS8

Duct Fan x 1pc
Type C Extension Cable x 1pc
E12 Controller x 1pc
Hanging Straps x 2pcs
Screw Set x 4pcs
Wall Anchor x 4pcs

FAQ

Q: Can I use the fan with an input voltage higher than
240Vac?

A: No, using the fan under higher input voltages can damage the
fan and is not recommended.

Q: How do I clean the fan?

A: Do not use water or liquid for cleaning. Avoid using
chemicals such as gasoline or benzene. Use a dry cloth to clean the
fan.

“`

View Fullscreen

USER MANUAL

PRODUCTS INCLUDED IN THIS MANUAL: Product AeroZesh S4 (E12) AeroZesh S6 (E12) AeroZesh S8 (E12) AeroZesh S4 (E42A) AeroZesh S6 (E42A) AeroZesh S8 (E42A)

SKU VSV-AZS4 VSV-AZS6 VSV-AZS8 VSV-AZS4E42A VSV-AZS6E42A VSV-AZS8E42A

CONTENTS

Safety Information

Key Features

Product Contents

Dimension

Specifications

Application

Installation

Fan Control

Maintenance

Complete Your Setup

Warranty Information

SAFETY INFORMATION
– Please read the manual carefully and follow the instructions before installing and operating the fan.
– The input voltage of this fan is 110Vac~240Vac. DO NOT use the fan under higher input voltages.
– The air transferred shall not be flammable, explosive, corrosive. The environment temperature shall not exceed 40°C.
– Direct spraying or cleaning by water or other liquid is forbidden. This may cause short circuit or electric shock.
– Installation on window or outdoor is forbidden. – Avoiding air reflux via open air flue or other fired equipment. – DO NOT use chemicals as gasoline, benzene and diluent to clean the fan. – DO NOT let water into motor and electric parts, or make the plastic parts immerge into water
with temperature higher than 60 °C. – DO NOT cut off or reconnect the power cord. If the power cord is damaged, please contact
us. Any unauthorized modifications will void the warranty immediately.
1

KEY FEATURES

QUIET PWM EC MOTOR
EC motor with PWM tuning provides low noise and energy saving.

EFFICIENT AIR FLOW
Efficient airflow delivery with hydro-mechanical stator blades in high static pressure.

SPEED CONTROL& ON/OFF CYCLE1
10-level speed control and three ON/OFF cycle modes via E12 controller.

DUAL BALL BEARINGS
Dual ball bearings in motor provide an estimated 67,000 hours lifespan. Enables the fan to be mounted in any direction.

MULTIPLE MODES2
Manual, ON/OFF cycle, and intelligent Auto modes, quick and easy setup via the VIVOSUN GrowHub.

WI-FI & APP CONTROL2
Smart settings based on variable environment conditions via GrowHub and VIVOSUN App remotely.

1. Only on models of VSV-AZS4/VSV-AZS6/VSV-AZS8. 2. Only on models of VSV-AZS4E42A/VSV-AZS6E42A/VSV-AZS8E42A.

PRODUCT CONTENTS
VSV-AZS4/VSV-AZS6/VSV-AZS8

Duct Fan x 1pc

Type C Extension Cable x 1pc

E12 Controller x 1pc

Hanging Straps x 2pcs

Screw Set x 4pcs

Wall Anchor x 4pcs
3

PRODUCT CONTENTS
VSV-AZS4E42A/VSV-AZS6E42A/VSV-AZS8E42A

Duct Fan System x 1pc

Type C Extension Cable x 1pc

Hanging Straps x 2pcs

Duct Fan Screw Set x 4pcs

Wall Anchor x 4pcs

PRODUCT CONTENTS
VSV-AZS4E42A/VSV-AZS6E42A

Smart Controller x 1pc

Temperature/ Humidity Sensor (3m)

Expansion Screws x 2pcs

Iron Plate x 1pc

Cable Tie x 3pcs

Wire Tie x 1pc

PRODUCT CONTENTS

Exhaust Flange

Rotor Blades

Buckle Intake Flange

Fan Unit

EC Motor

Wind Circle

DIMENSION

Series No.

Part Flange Fan Unit Rotor Blades Terminal Box Buckle

Quantity 2 1 1 1 2

Unit: mm

Model No. VSV-AZS4 VSV-AZS6 VSV-AZS8

303

315

330

146

196

115

111.5

135

200

224.5

251.5

75.5

100

F
G
Long hole
H

50 7×5 187.5

56 7×5 213.5

80 8×6.5 235

101.5

115

126.5

E
F 4-G Long hole
B
A
H H1 C D
7

SPECIFICATIONS

VSV-AZS4

Size

4 inch

Input
Average Power Usage
Airflow

110-240V 50/60Hz 20W
212 CFM

Noise

28 dB(A)

Fan Speed (Max)

2800RPM

Electric Motor

EC-motor

Bearing

Dual Ball Bearing

Bearing IP

IPX4

Bearingsrated

67000H

Certification

FCC,CE,UKCA,ETL

VSV-AZS6 6 inch
110-240V 50/60Hz 35 W
402 CFM 32 dB(A) 2800RPM EC-motor Dual Ball Bearing
IPX4 67000H FCC,CE,UKCA,ETL

VSV-AZS8 8 inch
110-240V 50/60Hz 75 W
830 CFM 51dB(A) 3000RPM EC-motor Dual Ball Bearing
IPX4 67000H FCC,CE,UKCA,ETL

APPLICATION
AeroZesh can be used as an exhaust fan or an intake fan for your grow space, and each has different setup position for optimal ventilation. Exhaust fan: Hung or mounted on the highest opposite corner inside your grow space. Airflow arrow points away from your grow space. Intake fan: Mounted at a bottom corner outside of your grow space. Airflow arrow points toward your grow space.
Exhaust Fan
Intake Fan
9

INSTALLATION
1. MOUNTING AS AN INTAKE FAN STEP 1 Unscrew and loosen the buckles on the fan unit.
STEP 2 Remove the fan unit from the flange bracket.
10

INSTALLATION
STEP 3 Drill four holes and attach the two flange brackets on the desired position on a wood support or stud with four wood screws. If you want to mount the fan on a surface other than wood, attach the wall anchors through the holes before screwing the wood screws to attach the flange bracket.

STEP 4
Slide the fan unit back between two flanges brackets, make sure the airflow arrow on the fan unit is the same direction with that on the flange bracket. Then tighten the metal clamps to secure the fan unit.

Fan Unit

INSTALLATION
STEP 5 Put the buckles back on the fan unit and fix with screws.

Buckle

2. HANGING AS AN EXHAUST FAN A. HANGING UPWARD A.1 Hanging Straps STEP 1 Loop the two hanging straps around the flanges as shown in the diagram.
12

INSTALLATION
STEP 2 Slip the strap through the inner ladder lock slot from the bottom.
STEP 3 Pass the strap into the outer ladder lock slot from the top. Adjust the length of the completed loop as needed.
13

INSTALLATION
STEP 4 Tuck the loose end through the center gap of the ladder lock to secure the loop.
STEP 5 Loop the other end of two hanging straps around a pole as showed in picture. Hang the fan by the duct flanges to secure it. Adjust the height as needed to fit your space.
14

INSTALLATION
A.2 Rope Hangers (sold separately) STEP 1 Loop the two rope hangers around the flanges as shown in the diagram. Lock the carabiners to the ropes to secure the fan.
STEP 2 Loop the other end of the rope hangers around the crossbeam as shown in the diagram. Lock the carabiners to the rope to secure the fan to the pole. Press the yellow adjustment button to raise and lower the fan to your desired height.
15

INSTALLATION
B. HANGING DOWNWARD B.1 Hanging Straps Loop the hanging straps around the pole and the flange brackets of the fan. Adjust and tighten the hanging straps, as show in part A.1, Steps 2-4. Let the fan hang on the pole once the straps are secure.
16

INSTALLATION
B.2 Rope Hangers(sold separately) Loop the two rope hangers around the pole and the flange bracket of the fan. Secure the two hooks to their respective ropes to hang the fan. Press the yellow button on the rope hanger to adjust the height of the fan to the desired level.
17

INSTALLATION
3. CONNECTING TO THE E12 CONTROLLER VSV-AZS4/VSV-AZS6/VSV-AZS8
Use a Type-C extension cord to connect an AeroZesh to an E12 Controller. The controller will get power from the duct fan.
18

INSTALLATION
4. CONNECTING TO THE VIVOSUN GROWHUB CONTROLLER VSV-AZS4E42A/VSV-AZS6E42A/VSV-AZS8E42A
A
B
Use a Type-C extension cord to connect an AeroZesh to a GrowHub controller (A). A GrowHub controller has two Type-C ports to control two AeroZesh fans (B). The controller will get power from the AeroZesh.
19

FAN CONTROL

CONTROLLED BY E12 (VSV-AZS4/VSV-AZS6/VSV-AZS8)

Fan Speed Setting

Press the ”LEVEL” button to change the

fan speed level from 0 to Max. The speed

level will display above (”A” indicates the

Current speed level

max speed level).

Long press “LEVEL” button for 3 seconds to quick turn off the duct fan. The speed level will be saved and restored if you turn

Current ON/OFF cycle

on the duct fan by pressing the “LEVEL” button again.

Control button of ON/OFF cycle mode

ON/OFF Cycle Setting Press the ”CYCLE” button to switch

Control button of speed level

between three ON/OFF cycle modes and

the corresponding indicator light will on:

”50/10”: 50min ON, 10min OFF

”30/30”: 30min ON, 30min OFF. ”10/50”: 10min ON, 50min OFF. No lights on: Manual mode.

All the indicating lights and display screen will turn off after no operation for 10 seconds. Press

any button to turn on the screen.

Notice: Suggest to use E12 outside the grow tent for longer life span.

CONTROLLED BY GROWHUB E42A (VSV-AZS4E42A/VSV-AZS6E42A/VSV-AZS8E42A) Please see the manual of GrowHub E42A about duct fan control and App connection.

MAINTENANCE
Regular cleaning each year is suggested. Make sure to turn off power before cleaning. STEP 1 Unscrew and loosen the buckles on the fan unit and remove it from the flange brackets.
STEP 2 Use a damp cloth to clean the fan blades and the impeller. Remove the wind circle in between the fan unit and intake flange. Clean the inside of intake and exhaust flanges and the wind circle.
STEP 3 After cleaning, put the fan unit and wind circle back into the flange brackets and secure the buckles.
21

COMPLETE YOUR SETUP
LED GROW LIGHT AeroLight / VS / VSX / VSF – 100W-645W powerful LED grow light – High PPE efficacy with Samsung LED – Full spectrum included FR / UV – 0-100% dimming with daisy-chain – ETL / CE / FCC certificated – Compatible with GrowHub controller
CARBON FILTER – Eliminate odors and refresh air in your tent -Premium grade Australian charcoal -High-efficiency absorption and a long lifespan -Compatible with 4”/6”/8” inline fans
22

WARRANTY INFORMATION
WARRANTY TERMS
1. We offer a 3-year warranty against manufacturing defects for all of our products from the date of purchase. If you need warranty assistance, please contact us as soon as possible.
2. The warranty does not cover damage due to high moisture levels, water damage, power surges, improper hangingmounting, improper use, dust build-up, or users’ unauthorized modifications.
3. In the USA, if any AeroZesh duct fan ceases working within 30 days of use, you can choose: (A) Exchange: We will email you a pre-paid return label. Please ship the product back to our USA warranty center and a replacement will be sent to you free of charge as soon as we receive the defective product. (B) Refund: We will email you a pre-paid return label. Please ship the product to our USA warranty center and we will issue a refund as soon as the product has been received. Refund periods may depend on the processing time of your bank or institution–usually, a refund takes about 5 business days to be processed.
4. Our company reserves all rights to the final explanation of this warranty structure. If you have any questions about our warranty policy, please contact us.
23

Documents / Resources

VIVOSUN AeroZesh S Temp Humidity WiFi Controller [pdf] User Manual
VSV-AZS4, VSV-AZS6, VSV-AZS8, VSV-AZS4E42A, VSV-AZS6E42A, VSV-AZS8E42A, AeroZesh S Temp Humidity WiFi Controller, AeroZesh S, Temp Humidity WiFi Controller, WiFi Controller, Controller

References

User Manual

VIVOSUN AeroZesh S Temp Humidity WiFi Controller User Manual

AeroZesh S Temp Humidity WiFi Controller

Specifications

Product Usage Instructions

Safety Information

Key Features

Product Contents

FAQ

Q: Can I use the fan with an input voltage higher than
240Vac?

Q: How do I clean the fan?

Documents / Resources

References

Leave a comment

Cancel reply