Wireless Collaboration Add On Device
NC-X910
QUICK START GUIDE
To learn more about this product, visit www.vivitekcorp.com for user manual, software and more.
PACKAGE CONTENTS
The Remote Control Unit
Function Descriptions
| Icon | Description |
 |
Mode Switching (Presentation- Signage) |
 |
Power |
 |
Mouse Click (Left Click) |
 |
Volume +/- |
| OK | Navigation |
 |
Confirm |
 |
Go-Back |
 |
Home |
 |
Recent Apps |
NC-X910 OVERVIEW
- Port USB-A
- Micro SD Card Slot
- RJ45 (Ethernet)
- HDMI IN
- HDMI OUT
- RS232
- Port Type-C
- AUDIO IN
- AUDIO OUT
- RESET
- DC Jack
SETTING UP Main Unit
Hardware Installation
Antenna: Attach Antenna to Antenna Connector.
HDMI: Connect HDMI cable to a LCD monitor or projector HDMI connector.
Power Input
5VDC Jack: Connect to the USB power adapter with the supplied USB cable.
Configuring network connection
There are two network connections, Ethernet and WiFi.
- Ethernet
Use a RJ45 cable to connect the main unit to your network, typically your Intranet. - WiFi
Two options are available. - WiFi Hotspot
- Regular WiFi
* To configure, bring up the Settings menu on the device and then follow the on-screen instructions.
Screen mirroring
To mirror content to the screen, Novo Connect offers three options:
- Mirror with software / App
- Mirror with native mirroring capability of your mobile devices (Miracast, AirPlay, & Google Cast)
Novo Connect Software
Visit www.vivitekcorp.com and install the Novo Connect Software on your PC/Mac
Mirroring with Novo Connect software
Free software is available for Windows, MacOS, iOS and Android devices.
- Download and install the Novo Connect software.
• Tablets/phones/Chromebooks: Download Novo Connect App from Apple’s App Store or Google’s Play Store
• Windows/Mac computers: Download Novo Connect software from Novo Connect website www.vivitekcorp.com
- Connect your computer or mobile device to the same network as the main unit.
- Run the Novo Connect software, then you can connect to the main unit via one of the following methods.
• Meeting ID
• IP address
• QR-code scan
• Nearby Devices
Mirroring with native mirroring
NC-X500 supports the following native mirroring:
- AirPlay – iPhones, iPads, & Mac computers
- Miracast – Windows 10 computers and some Android devices
- Google Cast – Most Android devices
- Connect your mobile device to the same WiFi network as the main unit.
- Depending on your device, the steps to start mirroring slightly vary.
• For iPhones, iPad, and Mac computers, bring up the AirPlay menu
• For Windows 10 computers, bring up its “Connect” or “Connect to a wireless display” menu
• For Android devices, this feature is generally referred to as “Screen Cast”, “Screen Mirroring”, or “Google Cast”, etc.
Once you see the main unit in the device list, tap or click to connect.
ADDITIONAL INFORMATION
Safety & Warning Information
FCC – Federal Communication Commission (USA)
This device contains the following wireless device and underwent the certification process of FCC PART 15 SUBPART B under the respective FCC ID below:
- FCCID: H79-023DS3
The FCC ID is indicated as the label affixed on the bottom side of your device.
CE – Conformité Européenne (EU)
This device intended for sale within the European Union are marked with the Conformité
Européenne (CE) Marking, which indicates compliance with the applicable Directives and
European Norms, and amendments, the following standard were applied:
- EN IEC 61000-3-2:2019 + A1:2021
- EN IEC 62311:2020
- EN IEC 62368-1:2020+A11:2020
- EN 55032:2015+A11:2020+A1:2020
- EN 55035:2017+A11:2020
- EN 61000-3-3:2013+A2:2021+AC:2022
- ETSI EN 301 489-1 v 2.2.3 (2019-11)
- ETSI EN 301 489-3 v 2.1.1 (2019-03)
- ETSI EN 301 489-17 v 3.2.4 (2020-09)
- ETSI EN 300 328 v2.2.2 (2019-07)
- ETSI EN 301 893 v2.1.1 (2017-05)
- ETSI EN 300 440 v2.2.1 (2018-07)
CONTACT INFORMATION
ADDTRON TECHNOLOGY (JAPAN), INC.
Tel: 03-5733-1268
Fax: 03-3434-7232
http://www.addtron.jp
North America
Vivitek Service Center
14910 Summit Drive EASTVALE, CA.
92880
U.S.A
Tel: 855-885-2378 (Toll-Free)
Email : T.services1@vivitekcorp.com
Vivitek EMEA Headquarters
Zandsteen 15
2132 MZ Hoofddorp
The Netherlands
Customer Service & Technical Support:
Monday – Friday 09:00 – 18:00
English (UK): 0333 0031993
Simple. Guaranteed.
Thank you for choosing Vivitek Wireless Collaboration
www.vivitekcorp.com
Visit www.vivitekcorp.com for more product info
Copyright (c) 2024 Delta Electronics, Inc. All Rights Reserved
A brand of 
Documents / Resources
 |
vivitek NC-X910 Wireless Collaboration Add On Device [pdf] User Guide NC-X910 Wireless Collaboration Add On Device, NC-X910, Wireless Collaboration Add On Device, Collaboration Add On Device, Add On Device, On Device |