VISUAL COMFORT PCD 3602 Maxime Medium Table Lamp Instruction Manual

ASSEMBLY INSTRUCTIONS

Maxime Medium Table Lamp 

Item # PCD 3602

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED): 

Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove socket ring (D) from socket (E).
3. Install harp (C) to socket (E) and secure with socket ring (D).
4. Remove finial (A) from harp (C).
5. Remove shade (B) from packaging and install to harp (C) using finial (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.
6. Install light bulb into the socket.
7. Remove protective cover (F) from plug.
8. Plug into electrical outlet and test fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Documents / Resources

VISUAL COMFORT PCD 3602 Maxime Medium Table Lamp [pdf] Instruction Manual PCD 3602, Maxime Medium Table Lamp, Medium Table Lamp, PCD 3602, Table Lamp

References

• User Manual