VISSONIC VPS-0808-4K Fixed Seamless Switching Matrix
This article applies to the following types of fixed seamless matrices:
|
Numb er |
name |
Panel color |
height |
Maximum number of input channels | Maximum number of output channels |
source |
| one | 4×4 fixed seamless switching matrix | black |
lU |
four | four | DCSV |
| two | 8×8 fixed seamless switching matrix | black | eight | eight |
DC12V |
|
| three | 16×16 fixed seamless switching matrix | black | sixteen | sixteen |
introduction
Product Introduction3
Fixed seamless switching matrix is a professional 4K high-definition fixed seamless switching matrix that supports multiple HDMI inputs and outputs. Input and output support HDMil.4, with a maximum output resolution of3840x2160@30Hz. The device control methods are flexible and diverse, including bidirectional serial port control, panel button control, etc. The product has intelligent EDID management to ensure compatibility with signal sources and operations in various application scenarios. This series of products is suitable for multimedia conference rooms, lecture halls, multifunctional halls, performing arts halls, electronic classrooms, exhibition displays, command centers, and other places.
Functional characteristics
- Support seamless and fast switching from multiple inputs to multiple outputs;
- Support multiple fixed splicing modes;
- Supports input and output, supports HDMl1.4, with the highest resolution3840x2160@30Hz;
- The color space supports RGB4:4:4, YCbCr4:4:4, YCbCr4:2:2, etc.;
- Enter? built-in ED IDs, 1920×1080@60Hz Dual channel (default), supports custom EDID;
- Input compatible DVI/HDMI signals; 9 default output resolutions are optional;
- The output signal format supports HDMI and DVI;
- Support power-off memory function;
- Supports continuous hot swapping of HDMI interfaces;
- Supports standby and low-power standby;
- Supports bidirectional serial port control, panel button control, and optional network port control; 19-inch standard cabinet installation chassis with a height of 1 U;
Packaging List
| ► 1 x host | ► 1 x Certificate of
Conformity&Warranty Card |
| ► 1 x serial cable
► 1 x power adapter |
► 1 x power adapter |
Explanation: This machine is strictly packaged before leaving the factory. Before using the product, please confirm whether the ordered product and accessories are damaged, deformed, or missing. If there is any damage, discrepancy or missing, please contact the product supplier.
Product Appearance
front panel
| Number | name | describe |
|
CD |
Power indicator light |
• The equipment is working normally, and the
indicator light is always red; • In standby mode, the indicator light is off; • Power off, indicator light goes off |
| Inputs I • White input channel switch button; | ||
| OUTPUTS I • White output channel switch button; | ||
|
MENU function button area |
• All: Select All button
• Switch all input signals to all output channels; |
|
| • Lock:
• Lock: Press and hold the lock button for 3 seconds; • Unlock Press and hold for 3 seconds to unlock the button; |
||
| • Mode: Scene saving
• Mode+IN numerickeycombination+Enter=Scene save, |
||
| • Enter:
• Command confirmation button; |
||
| • SCENSE: Scene call button, calling scene; | ||
| • CLEAR: Clear button to clear an unfinished action. | ||
| ON/OFF switch | • Power on/off |
Attention: The product images are for reference only, please refer to the actual product.
Rear panel 
| Number | name | describe |
| 1 | Input | • HDMI input port, connected to HDMI signal source, automatically detects connection status; |
| 2 | OUTPUT | • HDMI output port, connect to display, automatically detect connection status; |
| 3 |
RS232-IN |
• Connect control devices, such as PC computers, and control the local computer through upper computer software; |
| 4 |
RS232-0UT |
• Connect other peripherals, such as matrices, splicers, etc., and control the peripherals; Choose between Ethernet port and 0B9
Note: 16×16 without control network port |
| 5 | Power interface | • Connect the power supply DC5V; |
| 6 | RJ45 | • Optional, enhanced support for network control. |
| 7 | Grounding terminal | • Grounding terminal |
Attention: The product images are for reference only, please refer to the actual product.
Serial Port Definition
The host is connected to the control computer and can be controlled through RS232 serial port software. The RS232 IN port is a 9-pin female connector, and the RS232 OUT port is a 9-pin male connector; The RS232 OUTl port is a network port, and the pin description is as follows:
| Pin | name | function |
| one | N/u | empty |
| two | Tx | send |
| three | Rx | receive |
| four | N/u | empty |
| five | Gnd | Public areas |
| six | N/u | empty |
| seven | N/u | empty |
| eight | N/u | empty |
| nine | N/u | empty |
| Pin | name | function |
| one | N/u | empty |
| two | Rx | receive |
| three | Tx | send |
| four | N/u | empty |
| five | Gnd | Public areas |
| six | N/u | empty |
| seven | N/u | empty |
| eight | N/u | empty |
| nine | N/u | empty |
technical parameter
4. technical parameter |
Pin | colo ur | name | function | ||||
| one | Oran
ge white |
N/u | empty | |||||
| two | oran
ge |
Tx | empty | |||||
| three | Gree n
and white |
Rx | TX
sending |
|||||
| four | blue | N/u | Public
areas |
|||||
| five | Blue
and white |
God | Public areas | |||||
| six | gree
n |
N/u | RX
reception |
|||||
| seven | Brow n
white |
N/u | empty | |||||
| eight | Brow
n |
N/u | empty | |||||
|
0404 |
0808 |
one thousand six hundred and sixteen | ||||||
| Input signal | (4) Road HDMI | (8) Road HDMI | (16) Road HDMI | |||||
| Input connector | Type A 19-pin female head | |||||||
| Input resolution | highest 4K@30Hz RGB4:4:4, YCbCr4:4:4, YCbCr4:2:2 | |||||||
| output signal | (4) Road HDMI | (8) Road HDMI | (16) Road HDMI | |||||
| Output connector | Type A 19-pin female head | |||||||
| Output resolution | highest 4K@30Hz RGB4:4:4, |
| HDMI
standard |
HDMil.4 |
| HDMI embedded
audio |
PCM |
control
| Control Port | (2) RS232, (1) Ethernet port | |||
| Port connector | (1) DB9 RS232 input female connector, (1) DB9 RS232 output male connector, (1) RJ45 232 output | |||
| Keys | The white button supports switching and scene-calling | |||
| routine | ||||
|
transmission n distance |
1080P :::;; 15m; 4K :::;; Sm;
1080P fiber optic cable HDMI interface with a maximum length of SOm; 4K fiber optic cable HDMI interface with a maximum length of 30m; |
|||
| bandwidth | 10.2Gbps | |||
| working temperature | 0 °C ~+40 °C | |||
| Storage temperature | -10 °C ~ + 5 0 °C | |||
| relative humidity | 10%~90% | |||
| source | DC SV 1A | DC 12V 2A | DC12V 2A | |
| Size (W * D * H) | 437mm * 236mm * 44mm | |||
| Net weight |
kg |
Approximately 2 | Approximately
3kg |
Approximately 3.5kg |
Dimensional drawing
4×4 fixed seamless switching matrix
8×8 fixed seamless switching matrix 
16×16 fixed seamless switching matrix
Documents / Resources
 |
VISSONIC VPS-0808-4K Fixed Seamless Switching Matrix [pdf] Instruction Manual VPS-0808-4K Fixed Seamless Switching Matrix, VPS-0808-4K, Fixed Seamless Switching Matrix, Seamless Switching Matrix, Switching Matrix |