Specifications
- Operating Voltage: Wireless Exit Button – 5uA; Control Panel – 20mA
- Current: Wireless Exit Button – 8mA; Control Panel – 60mA
- Communication Frequency: 433MHz
- Communication Distance: About 50m
- Relay Contact Load: Wet contact control – 3A; Dry contact control – 5A
- Environment: Operating Temperature -20C to +60C, Operating Humidity 0% to 86%
Product Usage Instructions
Application
Wet Contact Control
Connect the control panel as follows:
- PIN: +12V
- GND: Ground
- CONTROL: Control Pin (Low Level effective)
Dry Contact Control
Connect the control panel as follows:
- PIN: +12V
- GND: Ground
- NC: Normally Closed Relay Output
- COM: Common Connection for Relay Output
- NO: Normally Open Relay Output
Introduction
- It is a 433MHz wireless exit button, with 1 million groups of rolling code encryption, secure and reliable.
- versions are available:
Wet contact control – no isolation to the circuit, control current ≤3A.
Dry contact control – with isolation circuit, control current ≤5A, can connect with household electrical appliances or lock to control directly.
Specifications
| Operating Voltage Wireless Exit Button Control panel |
2032 3V Li-battery DC 12±20% |
| Current
Idle Current Working Current |
Wireless Exit Button: ≤5uA; Control Panel: ≤20mA Wireless Exit Button: ≤8mA; Control Panel: ≤60mA |
| Communication Frequency | 433MHz |
| Communication Distance | About 50m |
| Relay Contact Load | Wet contact control: ≤3A; Dry contact control: ≤5A |
| Environment Operating Temperature Operating Humidity |
-20°C～+60°C 0%～86% |
Application
Wet Contact Control
Remark: “ON/OFF” represents “Toggle Mode”
| PIN | Notes |
| +12V | Positive Pole of Control Panel’s Power Input |
| GND | Negative Pole of Control Panel’s Power Input |
| CONTROL | Control PIN (Low Level effective) |
Dry Contact Control
Remark: “ON/OFF” represents “Toggle Mode”
| PIN | Notes |
| +12V | Positive Pole of Control Panel’s Power Input |
| GND | Negative Pole of Control Panel’s Power Input |
| NC | Normally Closed Relay Output |
| COM | Common Connection for Relay Output |
| NO | Normally Open Relay Output |
Dimensions
How to pair and clear pairing
- Pair Wireless Exit Button and Control Panel
- Remark: 1 Control Panel can pair with 6 Wireless Exit Buttons
- Control Panel: Press the button “Pair” for 3 seconds, then the indicator light stays on
- Wireless Exit Button: Press exit button once, the LED light shines, then they pair successfully.
- Clear Pairing
Press the control panel’s button “Pair” for 5 seconds, the indicator light shines quickly, then clear Pairing successfully.
Packing List
| Name | Quantity |
| Wireless Exit Button | 1 |
| Control Panel | 1 |
| Manual | 1 |
| 3M Sticker | 1 |
| Self Tapping Screw | 2 |
FAQ
Q: How many Wireless Exit Buttons can be paired with one Control Panel?
A: One Control Panel can pair with up to 6 Wireless Exit Buttons.
Documents / Resources
 |
VISIONIS 433MHz Wireless Exit Button [pdf] User Manual Wbutton 1, 433MHz Wireless Exit Button, Wireless Exit Button, Exit Button |