Vision Well IPC03 Security Camera User Manual

Vision Well IPC03 Security Camera

Important Instructions Before Using

• Although every effort has been made to make the manual complete and accurate, there may be some differences due to product updates. The device supports 2.4GHz Wi-Fi(and 5GHz Wi-Fi is supported).
• Please ensure that the Wi-Fi signal is above 75% in the location where you installed the camera, otherwise the camera will not be connected well.

In the Box

Please consult this checklist for all parts.

For camera

Description

APP Download

1. Download FONDAIL APP
   Method 1: Download ‘FONDAIL’ from APP Store (iOS) or Google Play (Android);
   Method 2: Scan the ‘FONDAIL’ APP QR code to download it.

Please use your phone’s camera or Google Chrome to scan the QR code.

ATTENTION: Other methods or Apps may put your privacy at risk.

Note: Please turn on 2 permissions below while using this APP for the first time.

1. Allow the app to access Bluetooth, mobile cellular data and WLAN or it will fail to add an IP camera.
2. Allow the app to receive push notifications, or the phone will not receive alarm push when motion detection or audible alarms triggered.

Note: Support

Set up the router

The device supports 2.4GHz Wi-Fi(and 5GHz Wi-Fi is supported).

The length of the Wi-Fi SSID and password should not exceed 24 characters. If your device has trouble connecting to the Wi-Fi network, or if you wish to switch networks, press and hold the RESET button for 5 seconds to reset the device.

Registration

Note:

The App interface may vary due to version updates. Please check the App Store for the latest updates.

1. Sign up
   Open the App, and tap Sign up now to register.
   If you already have an account, tap Log In to access it.
2. Complete registration
   Enter a valid email address, agree to the privacy agreement, then set your nickname and password. 

Note: Before creating a new account, please read the Privacy Policy and Terms of Use carefully.

Device Adding

Power on the device
Plug in the power supply, wait for the red light to flash, press the reset key until you hear a bugu sound, release the button.

Note: If the device is not in the red slow flashing after 30 seconds of turning on, press and hold the reset button for 5 seconds to reset, and then restart to pair the camera with the App.

Pair device to the App

Pairing method 1

• a. Enable Bluetooth on your phone.
• b. In the App, tap + Add Device or Add Manually. The device will be searched for via Bluetooth and appear on the screen. Follow the on-screen instructions to complete pairing.
• c. Complete the network configuration.

Pairing method 2

• a. In the App, tap Scan code to add or + >> Scan Code. Scan the QR code located on the device casing.
• b. Scan the QR code located on the device casing. Follow the onscreen instructions to complete pairing.
• c. Complete the network configuration.

Pairing method 3

• a. In the App, tap + >> Add Device or Add Manually. Select the icon according to actual camera.
• b. Reset the device and ensure a stable Wi-Fi connection.Note: If the upper right corner is not , please tap and change it to.
• c. Use the device to scan the QR code displayed in the App on your phone. Place your router, phone, and device close together for best connectivity.
• d. Complete the network configuration.

Live View

Note: The App interface may vary due to version updates. Please check the App Store for the latest updates.

Open the App to view live feed, take snapshots, talk, record videos, and use other functions as needed.

Failed to Connect to Wi-Fi?

1. Check if you turn on the Bluetooth of your cellphone and connect the phone to the Wi-Fi to which you want the camera to connect. (After finishing setup, you could turn off them).
2. Make sure the Wi-Fi name and password are correct. You could forget your Wi-Fi on your mobile phone and re-enter the password to check whether the password is correct.
3. Make sure the Wi-Fi works. You could try to connect the Wi-Fi to your phone, if you could normally surf the Internet, it means that the Wi-Fi works.
4. Put the camera and smartphone as close as to the router.
5. Check the number of devices your router is connected. Once the number of devices that your router connects exceeds its max limitation, other devices cannot connect to the router.
6. Make sure the QR code on the phone screen is normal and the distance between the phone and the camera lens is 10-15cm (0.33-0.5ft) during the scanning process.
7. After checking the above information, if the camera cannot connect to the Wi-Fi, please try to re-download the APP, reset the camera and restart the router, and then add the camera again.
8. If you tried all steps, but still failedl, please send your order id and problem to support@visionwell.net

Installation

Install the camera

• a. Take the bracket off the camera firmly.
• b. Install the expansion screws and mounting screws.
• c. Insert the camera into the bracket.

Important Note:

• When the remaining battery of the camera is low, even with the solar panel, take the camera down, charge it indoors with the included power cable and a 5V power adapter. Do not use a non-5V power adapter to charge the camera.
• Insert the solar panel charging port into the rubber plug for weather resistance.

Share the Camera

You can provide access to the camera live stream as well as previously recorded footage to family and friends using the camera share function.
Only the administrator account that initially set up the camera can invite other users to share.

1. Tap Me >> Share to enter the share page, tap Device Share and find the device you want to share.
2. Tap your device, and tap Add . You can complete the sharing process through Scan QR Code or Enter Account .

Video Management

The camera needs a Micro SD card (not included) to store video files.
Insert the Micro SD card into the SD card slot of the camera correctly.

SD card requirements:

1. Recommend the use of brand-name cards such as SanDisk, Samsung, etc.
2. Support max 256GB capacity;
3. Recommend the use of standard Class 10 SD cards.
4. Only FAT 32 format is supported (you can select FAT 32 to format the SD card after inserting the SD card into the computer).

*When the camera detects an intruder, it will automatically save the video file to the SD card.

How to download SD card video to a mobile phone or a computer?

1. When playing the historical video in the APP, select the video clip you want to download, and click Download.
2. After inserting the SD card into the computer or mobile phone, look for the required video files. The video file is in MP4 format, and you can play it directly with the player.

Camera’s Specification

For camera

Certifications

Don’t throw batteries or out-of-order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back the products or use the selective collection of garbage proposed by your city.

Hereby, we declare that the radio equipment type IPC03 is in compliance with Directive 2014/53/EU.

Compliance Information

WEEE- This symbol means the product must not be disposed of with household waste- Please recycle at designated collection points.
RoHS: This product complies with EU RoHS Directive 2011/65/ElJ and its amendments.
RF: This device operates in 2.4GHz (2400—2483.5 MHz). Maximum RF output power: 100 mw (20 dBm)-

Specific precautions for EMC
This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

RF EXPOSURE INFORMATION

• This device meets the EU requirements (2014/53/ElJ) on the limitation of exposure of the general public to electromagnetic fields by way Of health protection.

BATTERY SAFETY

• Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device.
• DO not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, or expose to fire, explosion or other hazard.
• Do not use a battery if its case appears damaged, swollen, or compromised. Examples include, but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
• Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations.

Power Adapter Safety
The power plug is intended to serve as a disconnect device. Do not drop or cause an impact to the power adapter.

• If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
• DO not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.

Child’s Safety

• Comply with all precautions with regard to the child’s safety. Letting children play with the device or its accessories may be dangerous.
• The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Operation Safety

• Use the device under allowed humidity and temperature conditions.
• Do not aim the device at strong light sources (such as lamplight and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor and causing overbrightness and flickering.
• Observe local laws and regulations, and respect the privacy and legal rights of others.

Contact us

Customer first and honest service is our purpose.
Contact us by Amazon for a Replacement or Refund if you receive the item with a defect.
If you have any other questions or needs, please feel free to contact us.

We will do our best to help you!
E-mail: support@visionwell.net

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.