VISHAY TS3 Square Surface Mount Miniature Trimmer
FEATURES
- 0.125 W at 70 °C
- Small size for optimum packaging density
- Suitable for both manual and automatic operations
- Material categorisation: for definitions of compliance, please see www.vishay.com/doc?99912
DIMENISONS
in millimeters (inches) ± 0.25 mm (± 0.010″)
RECOMMENDED SOLDERING AREAS
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS | |
Resistive element | Cermet |
Electrical travel | 220° |
Resistance range | 10 W to 2 MW |
Stocked range | 1 kW to 100 kW |
Standard series | 1 – 2 – 5 |
Tolerance standard | ± 20 % |
Circuit diagram |
![]() |
Power rating | 0.125 W at 70 °C |
Temperature coefficient (max.) | £ 100 W ± 150 ppm/°C/> 100 W ± 100 ppm/°C |
Limiting element voltage (max.) | 200 V |
Contact resistance variation | 3 % or 3 W |
End resistance | 1 % or 3 W |
Dielectric strength (RMS) | 500 V (sea level) |
Insulation resistance (500 VDC) | 100 MW |
MECHANICAL SPECIFICATIONS | |
Mechanical travel | 250° |
Operating torque (max. Ncm) | 0.5 |
End stop torque (min. Ncm) | 2 |
Unit weight (max. g) | 0.1 |
Mechanical life (cycles) | 50 |
Note
- Nothing stated herein shall be construed as a guarantee of quality or durability
ENVIRONMENTAL SPECIFIACTIONS | |
Temperature range | -55 °C to +125 °C |
Sealing | Sealed container IP67 |
MSL level | 1 |
SOLEDERING RECOMMENDATIONS
Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029
STANDARD RESISTANCE ELEMENT DATA | ||
RESISTANCE | PART MARKING CODE | RESISTANCE CODE |
10 | A1 | 100 |
20 | 21 | 200 |
50 | 51 | 500 |
100 | A2 | 101 |
200 | 22 | 201 |
500 | 52 | 501 |
1K | A3 | 102 |
2K | 23 | 202 |
5K | 53 | 502 |
10K | A4 | 103 |
20K | 24 | 203 |
50K | 54 | 503 |
100K | A5 | 104 |
200K | 25 | 204 |
500K | 55 | 504 |
1M | A6 | 105 |
2M | 26 | 205 |
PACKAGING
ORDERING INFORMATION
(part number)
DESCRIPTION
(for information only)
RELATED DOCUMENTS | |
APPLICATION NOTES | |
Potentiometers and Trimmers | www.vishay.com/doc?51001 |
Guidelines for Vishay Sfernice Resistive and Inductive Components | www.vishay.com/doc?52029 |
Legal Disclaimer Notice
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organisation or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorised Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Downloaded from Arrow.com
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FAQ
- Q: What is the resistance range of the product?
- A: The resistance range is from 10Ω to 2MΩ.
- Q: How many pieces are included in the packaging?
- A: The product comes in a reel of 1000 pieces.
- Q: Where can I find more technical support?
- A: For technical questions, contact sferpottrimmers@vishay.com.
Documents / Resources
![]() |
VISHAY TS3 Square Surface Mount Miniature Trimmer [pdf] Owner's Manual TS3YJ203MR15, TS3YJ503, TS3 Square Surface Mount Miniature Trimmer, TS3, Square Surface Mount Miniature Trimmer, Mount Miniature Trimmer, Miniature Trimmer |