Viratech ONAIRPANELMINIP OnAir Panel Min IP User Manual

If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery

Text Conventions

Convention	Meaning
1–512	A range of values
50/60	A set of values of which only one can be chosen
Settings	A menu option not to be modified
<ENTER>	A key to be pressed on the product’s control panel

Symbols

Symbol	Meaning
	Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator
	Important installation or configuration information. The product may not function correctly if this information is not used
	Useful information

Any reference to data or power connections in this manual assumes the use of Seetronic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol

Safety Notes
Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 18.4 ft (5.6 m) is not expected.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.

The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
The luminaire is intended for professional use only

CAUTION:
This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.

ALWAYS:
Disconnect from power before cleaning the product or replacing the fuse.

Replace the fuse with the same type and rating.
Use a safety cable when mounting this product overhead.

Connect this product to a grounded and protected circuit.
DO NOT:

Open this product. It contains no user-serviceable parts.
Look at the light source when the product is on.
Leave any flammable material within 50 cm of this product while operating or connected to power.
Connect this product to a dimmer or rheostat.
Operate this product if the housing, lenses, or cables appear damaged.
Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it. (IP20)
ONLY use the hanging/mounting bracket to carry this product.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
In the event of a serious operating problem, stop using immediately.

If a Chauvet product requires service, contact Chauvet Technical Support.

FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Warning for North America, and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

Introduction

Description
The onAir IP Panel Min is a small and rugged IP65, full-spectrum LED soft light capable of facing all of the elements, outdoors or in. Ready to go on-location, or squeeze into any studio space with a low trim, the onAir IP Panel Min also features a superior quality of white light with high CRI/TLC and TM-30 scores; a smooth 16-bit dimming curve and +/- green adjustment, an emulated redshift, and the ability to produce a pop of color to achieve the exact look the user is aiming to create along with built-in, customizable effects accessible from the onboard LED menu. Conveniently switch mounting options from the Ball Head Mount with included adapters for a Baby Pin Receiver or a threaded insert for attaching a clamp. The rugged build is designed with a drop-in slot to ensure ease of use when changing accessories. PWM, DMX, RDM, CRMX, and an onboard control option ensure camera-ready use. Its small size makes it super portable, and the user can remove the main power supply for a 28 VDC input via 3-pin XLR to power the fixture from an external battery pack to add increased flexibility for all of the user’s remote needs

Features

Full-spectrum LED mini soft light panel style fixture for broadcast, film, and special events
IP65 rating for all weather use indoors or out.
Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS

Virtual color wheel with color matched to popular gel colors
+/- Green adjustment and emulated red-shift via DMX or on-board control
RDM (Remote Device Management) and CRMX wireless control for added flexibility

Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
Completely silent operation for use in studio applications
Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme.

Easily switch mounting options from clamp mount on a ball head to baby pin
Drop-in slot for accessories (sold separately)
Rugged design for years of rough use in the most extreme conditions.

Easy to use on-board control with full access to all the features of the fixture without the need for a dedicated controller.
USB port for fixture software updates
Compact design perfect for run-and-gun or indoor installation

28 VDC power input via 3-pin XLR to power the fixture from an external battery pack

Product Overview

Product Dimensions

Setup

The onAir IP Panel Min has a 3-pin IP65 XLR power input that can work with an input voltage of 28 VDC, 50 W.

AC Power
The onAir IP Panel Min has an auto-ranging external power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz and converts it to a 28 V DC, 50 W 3-pin IP65 XLR output. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions

Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Installing the Power Supply
The power supply attaches to the onAir IP Panel Min with a retaining pin.

Align the power supply so the loop on the back of the product and the loop on the power supply line up and fit into each other.

Press and hold the latch button down on the retaining pin and insert it through the sets of loops on the product and power supply.
Release the latch button.

AC Plug
The onAir IP Panel Min comes with a power input cord terminated with a Seetronic Powerkon IP65 connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the product has no plug, or if the user needs to change the plug, use the table below to wire the new plug.

Connection	Wire (U.S.)	Wire (Europe)	Screw Color
AC Live	Black	Brown	Yellow or Brass
AC Neutral	White	Blue	Silver
AC Ground	Green/Yellow	Green/Yellow	Green

Signal Connections
The onAir IP Panel Min can receive a wired DMX or wireless Lumenradio CRMX™ signal. The product has a mini 5-pin DMX in port.

Control Personalities
The onAir IP Panel Min uses a mini 5-pin DMX data connection or wireless CRMX™ for its 11 control
personalities: 1Ch, 3Ch, 4Ch, 5Ch, 6Ch, 8Ch, 10Ch, 11Ch, 15Ch., XYBasic(6), and XYExtended(10).

Refer to the Operation chapter to learn how to configure the onAir IP Panel Min to work in these personalities.

The Control Channel Assignments and Values section provides detailed information regarding the control personalities.

If the user is not familiar with or need more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.

DMX Linking
The onAir IP Panel Min can be linked to a DMX controller using a mini 5-pin DMX connection or a CRMX™ connection. For more information about DMX, read the DMX primer at: https://www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.

Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The onAir IP Panel Min supports RDM protocol that allows feedback to make changes to menu map options.

Lumenradio CRMX™ Connection
In optimal conditions, the onAir IP Panel Min can operate up to 300 m (900 ft) away from the CRMX™ transmitter, The CRMX™ receiver in the onAir IP Panel Min must be paired with the CRMX™ transmitter for wireless operation.

Initial Setup

Turn the CRMX™ transmitter on.
Connect the CRMX™ transmitter to a DMX controller.
Place the onAir IP Panel Min within 300 m from the CRMX™ transmitter.

Turn the onAir IP Panel Min on.

Configuration

From the onAir IP Panel Min’s control panel, go to DMX Address.

Select the start address, as with any other DMX compatible product.
Go to Wireless Setting > Receive On/Off.
Select On. (The Signal Strength Indicator will show a ? in front of the bars)

Press the reset button on the CRMX™ transmitter. (The Signal Strength Indicator on the onAir IP Panel Min will show a ϟ in front of the bars for 3 seconds while a connection is established.)

Product Pairing
If the onAir IP Panel Min has already been paired with the CRMX™ transmitter, the Signal Strength Indicator on top of the display will show the strength of the signal. In this case, the onAir IP Panel Min is ready to work in Wireless mode.
Pairing the onAir IP Panel Min and a New CRMX™ Transmitter

From the onAir IP Panel Min control panel, go to Wireless Setting > Receive Reset.

Select Yes.
From the CRMX™ transmitter, press . The signal indicator on the transmitter will flash.
Once the transmitter has found the onAir IP Panel Min, the signal indicator on the CRMX™ transmitter will illuminate solid.

The display screen on the onAir IP Panel Min will show the strength of the signal.

CRMX™ operation can be interrupted or inhibited by people or liquid masses, including water or snow, between the transmitter and receiver. For best results, keep the area between the transmitter and receiver clear of any liquid masses.

USB Software Update
The onAir IP Panel Min allows for software updates with a USB device using the built-in USB port. To update the software using a USB flash drive, do the following

Power on the product, and plug the flash drive into the USB port.
Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press . If a different message appears on the display, search for the updated software in the main menu (Upgrade Firmware) and select from Only This Unit, Multiple Fixture, or Other Fixture Type. A list of the updated software files will be displayed.
Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press .
If the selected file is incorrect, the update will fail, and the display will go back to the main interface. Repeat steps 1–3 using the correct file

If the selected file is correct, the update will start. DO NOT turn off the power or disconnect the USB during the process. USB update can take several minutes to complete.
When the update is completed, the fixture will automatically reboot.
Go to Fixture Information on the product’s menu map and confirm the firmware revision.

When the boot-up process is finished, restart the product.
- Place the .chl file in the root directory of the USB drive.
- The product’s USB port supports up to 32GB capacity and only works with FAT32 file format

Turning off the power, removing the USB, or not setting the fixture to the correct protocol during the update can cause partial or total firmware failure in the targeted fixture(s). Please refer to Force Upload section to fix firmware failure issues.

Force Upload
A Force Upload is done whenever a software update fails due to accidental removal of the USB flash drive, incorrect control protocol, or loss of power during a regular software update process.

A Force Upload process requires a target fixture (the fixture that needs a Force Upload and a main fixture (the fixture that controls the upload process).

The Force Upload process can only be done one target fixture at a time

To do a Force Upload, follow the instructions below:

Link the target fixture to the main fixture via a DMX 5-pin connection. Ensure that the target fixture is turned off.

Turn on the main fixture and set its protocol to DMX512.
Plug the flash drive into the USB-C port of the main fixture.
Go to Upgrade Firmware on the menu map.

Choose between Multiple Fixture and Other Fixture Type. Press .
- Multiple Fixture: Both the target fixture and main fixture are from the same product line (e.g., 2 onAir IP Panel Min fixtures).
- Other Fixture Type: The target fixture and main fixture are from different product series (e.g., a onAir IP Panel Min as the target fixture and a Maverick Silens 2 Profile as the main fixture).

Select the file that needs to be uploaded. The message “Are you sure?” will appear on the screen. Press . Turn on the target fixture within 1–2 seconds of pressing . The display on the target fixture should remain off.
a. The main fixture will show the update progress (0–100%).
b. The target fixture’s display will turn on, and a notification “” will appear on the screen
The timing of when the target fixture’s display will turn on varies from fixture to fixture.
DO NOT turn off power or remove the USB flash drive. Once the software is done uploading, the target fixture will automatically reboot.
Go to the target fixture’s main menu and confirm that the firmware version has been updated.

Reboot the target fixture

Accessories
The onAir IP Panel Min has an accessory slot for a filter or a honeycomb (sold separately). The optional
barndoor (sold separately) fits neatly over the front of the product. To install a filter or the honeycomb:

Slide the filter or honeycomb into the accessory slot.

Loosen the thumbscrew on top of the product and slide the panel out to secure the filter or honeycomb.
Tighten the thumbscrew.

To install the barndoor:

Place the barndoor frame around the front of the product.
Tighten the knob to secure the barndoor in place.

Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance.

Rigging
Chauvet recommends using the following general guidelines when mounting this product.

Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
Make sure that the structure and attachment points can support the weight before hanging the product (see the Technical Specifications for weight information).
When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.

When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity

Procedure
The onAir IP Panel Min comes with a ball-head mount which is compatible with the included baby pin receiver, surface-mount adapter, and 12 mm clamp bolt adapter. Mounting clamps are sold separately. Make sure the mounting hardware or surface is capable of supporting the weight of this product.

Mounting Diagram

Operation

Control Panel Description

Knob	Function
<DIM/INT><MENU>	Turn to increase or decrease the dimmer value in CCT mode and XY control mode, or the intensity in HSV mode
	Press once to access the menu
	Press twice to access On Board Control
	Press and hold to access the home screen
	Press to exit from the current menu or function or cycle through the menu map
<HUE><UP/DOWN>	Increases or decreases the hue value in CCT mode and HSV mode, or the X value in XY Control mode
<HUE><UP/DOWN>	Navigates upwards/downwards through the menu list or increases/decreases the numeric value when in a function
<CCT/SAT><ENTER>	Turn to increase or decrease the color temperature in CCT mode, the saturation in HSV mode, or the Y value in XY Control mode
<CCT/SAT><ENTER>	Press to enable the currently displayed menu or set the currently selected value into the selected function

Control Options
The onAir IP Panel Min has 8 options for control:

Wired DMX
Using the included DMX mini XLR adapter

Wireless Lumenradio CRMX™
With the option to convert wireless input to wired DMX output
CCT Control
Correlated Color Temperature, standalone with the control knobs
HSV Control
Hue, Saturation, Value, standalone with the control knobs
XY Control
Cartesian coordinates X and Y, standalone with the control knobs
Preset CCTs
Preset Correlated Color Control options, standalone through the display menu
Manual Color Mixer
Individual color control to create custom colors, standalone through the display menu
Effect Macros
Automatic programs, standalone through the display menu

Programming
Refer to the menu map to understand the menu options. The menu map shows the main menu and a variable number of programming levels for each option.

To access the main menu from the Home Screen, press <MENU>
To navigate to the desired option in the main menu, press repeatedly until the option is indicated, or use <UP> <DOWN> or to navigate directly.
Press < ENTER> to select the indicated option
Use <UP> or < DOWN> to navigate within a programming level until the desired option is indicated.
To return to the main menu, press < MENU>repeatedly until it shows on the display.
Press and hold < MENU > to return to the home screen.

On Board Control Pressing

Pressing < MENU>twice accesses the On Board Control modes. In an On Board Control mode, the control knobs control the output of the product.

On Board Control Menu

Main Level	Programming Levels			Description
On Board Control	CCTControl	DIM	000–100%	Left knob: dimmer
		HUE	-0.25–+0.25	Middle knob: hue
		CCT	2800–8000K	Right knob: color temperature
	HSVControl	INT	000–255	Left knob: intensity
		HUE		Middle knob: hue Right knob: saturation
		SAT
	XYControl	DIM	00.0–100%	Left knob controls dimmer
		X	0.00–0.850	Middle knob controls X Right knob controls Y
		Y
	Effect Macros	Color Chase	Speed <001–100>	Selects effect macro and speed
		Police Car
		Firetruck
		Fire
		Clouds
		Fireworks
		Paparazzi
		Lightning

Menu Map
Refer to the onAir IP Panel Min product page on www.chauvetprofessional.com for the latest menu map

Main Menu	Programming Levels				Description
DMXAddress	001–512*				Selects DMX address (*Highest channel restricted to personality chosen)
DMXChannel	1Ch	Preset CCTs	Hue	<-25–25>	1-channel: select preset CCT, hue
		Manual Color Mixer	Red	<000–255>	1-channel: combine red, green, blue, and white to make a custom color (0–100%)
			Green	<000–255>
			Blue	<000–255>
			White	<000–255>
	3Ch				3-channel: dimmer, color temperature, hue
	4Ch				4-channel: RGBW
	5Ch				5-channel: 16-bit dimmer, color temperature, hue, strobe
	6Ch				6-channel: dimmer, RGBW, strobe
	8Ch				8-channel: 16-bit RGBW
	10Ch				10-channel: dimmer, 16-bit RGBW, strobe
	11Ch				11-channel: dimmer, RGBW, strobe, color temperature, hue, effect macros and speed, control
	15Ch				15-channel: 16-bit dimmer, 16-bit RGBW, strobe, color temperature, hue, effect macros and speed
	XYBasic(6)				6-channel: 16-bit dimmer, 16-bit X, 16-bit Y
	XYExtended(10)				10-channel: 16-bit dimmer, 16-bit X, 16-bit Y, strobe, effect macros and speed, control

	Main Menu	Programming Levels				Description
	Static	CCT Control				Correlated color temperature control
		HSV Control				Hue, saturation, value control
		XY Control				X and Y coordinate control
		Preset CCTs	2800K	Dimmer Hue	<000–255><-25–25>	Selects preset color temperature, dimmer and hue
			2900K
			3000K
			3100K
			3200K
			3300K
			3400K
			3500K
			3600K
			3700K
			3800K
			3900K
			4000K
			4100K
			4200K
			4300K
			4400K
			4500K
			4600K
			4700K
			4800K
			4900K
			5000K
			5100K
			5200K
			5300K
			5400K
			5500K
			5600K
			5700K
			6000K
			6500K
			7000K
			7500K
			8000K
		Manual Color	Red	<000–255>		Combine red, green, blue, and white to make custom color (0–100%)
			Green
			Blue
			White
Effect Macros		Color Chase		<001–100>		Selects effect macro and speed
		Police Car
		Firetruck
		Fire
		Clouds
		Fireworks
		Paparazzi
		Lightning
Red Shift		On				Enables or disables red shift
		Off
Master/ Slave		Master				Standalone mode
		Slave				Slave mode
DMX Loss		Hold Last				Holds last signal received
		Stop DMX				Holds output
		Blackout				Blacks out the product
Dimmer Curve		S Curve				Sets the dimmer curve
		Linear
		Square
		Inverse Square
Dimmer Mode		Off				Instantaneous dimmer
		Dimmer 1–3				Dimmer mode, fast (1) to slow (3)
Color Calibrate		Off				Color calibration off
		User	Red	<125–255>		Sets maximum red LED value
			Green			Sets maximum green LED value Sets maximum blue LED value
			Blue
			White			Sets maximum white LED value
		Factory Calibration				Color calibration set by factory
LEDFrequency		600Hz				Sets the Pulse Width Modulation frequency
		1200Hz
		2000Hz
		4000Hz
		6000Hz
		25KHz
Wireless Setting		Receive On/Off		Off		Enables/disables CRMX™
				On
		Receive Reset		No		Resets wireless receiver
				Yes
		Wireless to DMX		No		Converts wired CRMX™ to wired DMX output
				Yes
Back Light		10S				Times out display after 10 seconds of inactivity
		30S				Times out display after 30 seconds
		2Min				Times out display after 2 minutes
		Always On				Display always on
Information		Fixture Hours		<_______ H>		Shows total hours the product has been powered on
		LED Hours		<_______ H>		Shows total hours the LEDs have been powered on
		Version		<V_._ _>		Shows current firmware version
		UID		21A40139_ _ _ _		Shows product UID
Upgrade Firmware		Only This Unit		________ _.CHL		Selects an update file for this product, or shows “No such file!”
				…
		Multiple Units		________ _.CHL		Selects an update file for this and connected onAir IP Panel Min products, or shows “No such file!”
				…
		Other Fixture Type		________ _.CHL		Selects an update file for other connected products, or shows “No such file!”
				…
Factory Reset		No				Resets the product to factory default settings

The “Other Fixture Type” option under Upgrade Firmware can only be selected for connected products compatible with the Upload 03 (the first 2 digits of the item code must be 03).

Home Screen The home screen of the onAir IP Panel Min shows the current settings and status of the product. To see the home screen, press and hold < MENU >until it shows on the display. From the home screen, press < MENU > to access the menu.

Number	Description
1	Current product temperature
2	Current wireless signal status
3	Bottom line shows details of the current control mode

Example Home Screens

DMX Configuration
Use control configurations to operate the product with a DMX controller.

Control Personalities
To set the control personality:

Go to the DMX Channel main level.
Select the desired personality, from 1Ch, 3Ch, 4Ch, 5Ch, 6Ch, 8Ch, 10Ch, 11Ch, 15Ch, XYBasic(6), or XYExtended(10)
- See the Starting Address section for the highest starting address available for each personality.
- Make sure that the starting addresses on the various products do not overlap due to the new personality setting.

Starting Address
Each product will respond to a unique starting address from the controller. All products with the same starting address will respond in unison. To set the starting address in DMX mode:

Go to the DMX Address main level.

Select the starting address (001–512).

Personality	Highest Address	Products per Universe
1Ch	512	512
3Ch	510	170
4Ch	509	128
5Ch	508	102
6Ch	507	85
8Ch	505	64
10Ch	503	51
11Ch	502	46
15Ch	498	34
XYBasic(6)	507	85
XYExtended(10)	503	51

Control Channel Assignments and Values
XYExtended(10) / XYBasic(6)

XY Basic (6)	XY Extended (10)	Function	Value	Percent/Setting
1	1	Dimmer	000 ó 255	0–100%
2	2	Fine dimmer	000 ó 255	0–100%
3	3	X coordinate	000 ó 255	0–100%
4	4	Fine X coordinate	000 ó 255	0–100%
5	5	Y coordinate	000 ó 255	0–100%
6	6	Fine Y coordinate	000 ó 255	0–100%
–	7	Strobe	000 ó 010011 ó 255	No functionStrobe, slow to fast
–	8	Effect macros	000 ó 010011 ó 039040 ó 068069 ó 096097 ó 125126 ó 154155 ó 182183 ó 211212 ó 240241 ó 255	No function Color chase Police car Firetruck FireClouds Fireworks Paparazzi LightningNo function
–	9	Effect macro speed	000 ó 255	Speed, slow to fast
–	10	Control	000 ó 255	See the Control Chart

15Ch / 11Ch / 10Ch / 8Ch / 6Ch / 5Ch

5Ch	6Ch	8Ch	10Ch	11Ch	15Ch	Function	Value	Percent/Setting
1	1	–	1	1	1	Dimmer	000 ó 255	0–100%
2	–	–	–	–	2	Fine dimmer	000 ó 255	0–100%
–	2	1	2	2	3	Red	000 ó 255	0–100%
–	–	2	3	–	4	Fine red	000 ó 255	0–100%
–	3	3	4	3	5	Green	000 ó 255	0–100%
–	–	4	5	–	6	Fine green	000 ó 255	0–100%
–	4	5	6	4	7	Blue	000 ó 255	0–100%
–		6	7	–	8	Fine blue	000 ó 255	0–100%
–	5	7	8	5	9	White	000 ó 255	0–100%
–	–	8	9	–	10	Fine white	000 ó 255	0–100%
5	6	–	10	6	11	Strobe	000 ó 010011 ó 255	No functionStrobe, slow to fast
3	–	–	–	7	12	Color temperature	000 ó 255	See the Color Temperature Chart
4	–	–	–	8	13	Hue	000 ó 001002 ó 255	0-25–+25
–	–	–	–	9	14	Effect macros	000 ó 010011 ó 039040 ó 068069 ó 096097 ó 125126 ó 154155 ó 182183 ó 211212 ó 240241 ó 255	No function Color chase Police car Firetruck FireClouds Fireworks Paparazzi LightningNo function
–	–	–	–	10	15	Effect macro speed	000 ó 255	Speed, slow to fast
–	–	–	–	11	–	Control	000 ó 255	See the Control Chart

4Ch

Channel	Function	Value	Percent/Setting
1	Red	000 ó 255	0–100%
2	Green	000 ó 255	0–100%
3	Blue	000 ó 255	0–100%
4	White	000 ó 255	0–100%

3Ch

Channel	Function	Value	Percent/Setting
1	Dimmer	000 ó 255	0–100%
2	Color temperature	000 ó 255	See the Color Temperature Chart
3	Hue	000 ó 001002 ó 255	0-25–+25

1Ch

Channel	Function	Value	Percent/Setting
1	Dimmer	000 ó 255	0–100% (color set through display menu)

Control Chart

Value	Percent/Setting
000 ó 007	No function
008 ó 015	Reset all
016 ó 023	Red shift on
024 ó 031	Red shift off
032 ó 039	S-curve dimmer
040 ó 047	Linear dimmer
048 ó 055	Square dimmer

Value	Percent/Setting
056 ó 063	Inverse square dimmer
064 ó 071	Dimmer mode off
072 ó 079	Dimmer mode 1 (fast)
080 ó 087	Dimmer mode 2
088 ó 095	Dimmer mode 3 (slow)
096 ó 255	Reserved for future use

Color Temperature Chart

Value	Percent/Setting
000 ó 005	No function
006 ó 012	2800K
013 ó 019	2900K
020 ó 026	3000K
027 ó 033	3100K
034 ó 040	3200K
041 ó 047	3300K
048 ó 054	3400K
055 ó 061	3500K
062 ó 068	3600K
069 ó 075	3700K
076 ó 082	3800K
083 ó 089	3900K
090 ó 096	4000K
097 ó 103	4100K
104 ó 110	4200K
111 ó 117	4300K
118 ó 124	4400K

Value	Percent/Setting
125 ó 131	4500K
132 ó 138	4600K
139 ó 145	4700K
146 ó 152	4800K
153 ó 159	4900K
160 ó 166	5000K
167 ó 173	5100K
174 ó 180	5200K
181 ó 187	5300K
188 ó 194	5400K
195 ó 201	5500K
202 ó 208	5600K
209 ó 215	5700K
216 ó 222	6000K
223 ó 229	6500K
230 ó 236	7000K
237 ó 243	7500K
244 ó 255	8000K

Standalone Configuration
In a standalone mode, the onAir IP Panel Min can be controlled through the display menu, the control
knobs, and/or the preset buttons.

CCT Control
In CCT Control mode, the control knobs have the following functions:

<DIM/INT>: Increase or decrease the dimmer value, from 00.0–100%.
< HUE >: Increase or decrease the green level, from -0.25–0.25.
<CCT/SAT>: Increase or decrease the correlated color temperature, from 2800–8000K

To set the product to CCT Control mode, press one of the preset buttons, or

Go to the Static main level.
Select the CCT Control option

HSV Control
In HSV Control mode, the control knobs have the following functions:

<DIM/INT>: Increase or decrease the dimmer value, from 000–255.
< HUE >: Increase or decrease the hue value, from 000–255.
<CCT/SAT>: Increase or decrease the saturation, from 000–255

To set the product to HSV Control mode:

Go to the Static main level.
Select the HSV Control option.

XY Control
In HSV Control mode, the control knobs have the following functions:

<DIM/INT>: Increase or decrease the dimmer value, from 00.0–100%.
< HUE>: Increase or decrease the X coordinate value, from 0.00–0.850.
<CCT/SAT>: Increase or decrease the Y coordinate value, from 0.00–0.850.

To set the product to HSV Control mode:

Go to the Static main level.
Select the XY Control option

Preset CCTs
To set the onAir IP Panel Min to a preset correlated color temperature through the display menu:

Go to the Static main level.
Select the Preset CCTs option.
Select the preset correlated color temperature, from 2800K, 2900K, 3000K, 3100K, 3200K,
3300K, 3400K, 3500K, 3600K, 3700K, 3800K, 3900K, 4000K, 4100K, 4200K, 4300K, 4400K,
4500K, 4600K, 4700K, 4800K, 4900K, 5000K, 5100K, 5200K, 5300K, 5400K, 5500K, 5600K,
5700K, 6000K, 6500K, 7000K, 7500K, or 8000K.
Set the Dimmer from 000–255.
Set the Hue from -25–25.

Manual Color Mixer
To mix a custom static color through the display menu of the onAir IP Panel Min:

Go to the Static main level.
Select the Manual Color Mixer option.
Select the color value to edit, from Red, Green, Blue, and White.
Set the selected color value from 000–255.
Repeat until the color is set as desired.

Effect Macros
The onAir IP Panel Min features 8 effect macros which simulate lighting effects.

Go to the Effect Macros main level.
Select the effect macro, from Color Chase, Police Car, Firetruck, Fire, Clouds, Fireworks, Paparazzi, or Lightning.
Set the speed from 001–100.

Settings Configuration
Red Shift
With red shift enabled, the color temperature will warm as the dimmer decreases in imitation of a lamp. To enable or disable the red shift function:

Go to the Red Shift main level.
Select from On or Of

Master/Slave
To set the onAir IP Panel Min product to master or slave mode:

Go to the Master/Slave main level.
Select from Master (sends control signal) or Slave (receives control signal).
- Configure all the slave products before connecting the master to the daisy chain.
- Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
- Do not connect more than 31 slaves to the master.

DMX Loss
To set the way in which the product will respond to the loss of a DMX signal

Go to the DMX Loss main level.
Select from
- Hold Last (maintain and send the last DMX values received),
- Stop DMX (maintain the last DMX values received without sending), or
- Blackout (set all channels to 000).

Dimmer Curve
To set the dimmer curve:

Go to the Red Shift main level.
Select from S Curve, Linear, Square, or Inverse Square.

Dimmer Speed Mode
To set the dimmer speed:

Go to the Dimmer Mode main level.
Select the dimmer speed mode from Off (instant), Dimmer 1 (fastest), Dimmer 2, or Dimmer 3
(slowest).

Color Calibration
To configure the color calibration:

Go to the Color Calibration main level.
Select from Off, User, or Factory Calibration.
If User, select the maximum color value to edit, from Red, Green, Blue, or White.
Set the maximum level for the selected color, from 125–255.
Repeat until the colors are calibrated as desired.

Pulse Width Modulation
To set the frequency of the pulse width modulation:

Go to the LED Frequency main level.
Select the PWM frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25KHz.

Wireless Lumenradio CRMX™ Settings
Toggle CRMX™
To enable or disable wireless CRMX™ control:

Go to the Wireless Setting main level.
Select the Receive Off/On option.
Select from Off (disabled) or On (enabled)

Receiver Reset
To reset the CRMX™ receiver:

Go to the Wireless Setting main level.
Select the Receive Reset option.
Select from No (do not reset) or Yes (reset)

Wireless to DMX
The onAir IP Panel Min can convert wireless CRMX™ to wired DMX output. To enable or disable this
function:

Go to the Wireless Setting main level.
Select the Wireless To DMX option.
Select from No (do not convert) or Yes (convert)
Fan Mode

To set the fan mode:

Go to the Fan Mode main level.
Select the fan mode, from Auto (adjusts to product temperature), On (always on), Off (always off), or Silent (silent mode).

Display Backlight
To set how long the display will stay lit without activity:

Go to the Back Light main level.
Select from 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On.

Information
To view product information, such as the number of hours the product has been on, the driver firmware, etc., go to the Information main level.

Factory Reset
To reset the product to factory default settings:

Go to the Factory Reset main level.
Select No (do not reset) or Yes (reset)

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean all lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below:

Unplug the product from power.
Wait until the product is at room temperature.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
Softly drag any dirt or grime to the outside of the transparent surface.
Gently polish the transparent surfaces until they are free of haze and lint

Always dry the transparent surfaces carefully after cleaning them.

Technical Specifications

Dimensions and Weight

Power Supply (PSU)	Length	Width	Height	Weight
With	10 in (254 mm)	5.62 in (143 mm)	4.29 in (109 mm)	6.2 lb (2.9 kg)
Without	10 in (254 mm)	4.13 in (105 mm)	4.29 in (109 mm)	4.2 lb (2.0 kg)

Note: Dimensions in inches are rounded.
Power

Power Supply Type		Range		Voltage Selection
Switching (external)		100 to 240 VAC, 50/60 Hz		Auto-ranging
Battery		28 VDC, 50 W		Fixed
Parameter	100 V, 60 Hz	120 V, 60 Hz	208 V, 60 Hz	230 V, 50 Hz	240 V, 50 Hz
Consumption	48 W	47 W	51 W	51 W	51 W
Operating current	0.470 A	0.393 A	0.253 A	0.217 A	0.213 A
Power I/O		U.S./Worldwide		UK/Europe
Power Input connector (PSU)		Seetronic Powerkon IP65		Seetronic Powerkon IP65
Power output connector (PSU)		3-pin IP65 XLR (28 VDC)		3-pin IP65 XLR (28 VDC)
Power input connector (Min)		3-pin IP65 XLR (28 VDC)		3-pin IP65 XLR (28 VDC)
Power cord plug		Edison (U.S.)		Local Plug
Light Source
Type	Color	Quantity	Power	Current	Lifespan
LED	Tri-color RGB	40	1.4 W	150 mA	50,000 hours
LED	Warm white	40	0.50 W	150 mA	50,000 hours
Photometrics
Color Temperature Color Temperature Beam Angle Field Angle Illuminance @ 5 m (Range) (At Full)
2800 to 8000 K	6367 K	94.9°	149.4°		47 lux
Thermal
Startup Temperature Range		Operating Temperature Range		Cooling System
-4 °F–113 °F (-20 °C–45 °C)		-22 °F–113 °F (-30 °C–45 °C)		Convection

Contact Us

General Information	Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd.	Voice: 844-393-7575
Davie, FL 33314	Fax: 954-756-8015
Voice: 954-577-4455	Email: chauvetcs@chauvetlighting.com
Fax: 954-929-5560
Toll Free: 800-762-1084	Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Pod 1 EVO Park	Email: UKtech@chauvetlighting.eu
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB	Website: www.chauvetprofessional.eu
UK Voice: +44 (0) 1773 511115 Fax: +44 (0) 1773 511110
Chauvet Benelux
Address: Stokstraat 18	Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem	Website: www.chauvetprofessional.eu
Belgium Voice: +32 9 388 93 97
Chauvet France
Address: 3, Rue Ampère	Email: FRtech@chauvetlighting.fr
91380 Chilly-Mazarin
France Voice: +33 1 78 85 33 59	Website: www.chauvetprofessional.eu
Chauvet Germany
Address: Bruno-Bürgel-Str. 11	Email: DEtech@chauvetlighting.de
28759 Bremen Germany Voice: +49 421 62 60 20	Website: www.chauvetprofessional.eu
Chauvet Mexico
Address: Bruno-Bürgel-Str. 11	Email: DEtech@chauvetlighting.de
28759 Bremen
Germany	Website: www.chauvetprofessional.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B	Email: servicio@chauvet.com.mx
(Entrance by Calle 2

Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration

Documents / Resources

Viratech ONAIRPANELMINIP OnAir Panel Min IP [pdf] User Manual
ONAIRPANELMINIP OnAir Panel Min IP, ONAIRPANELMINIP, OnAir Panel Min IP, Panel Min IP, Min IP

References

User Manual

Before You Begin