VIOTEL V2.0 Accelerometer Vibration Node User Guide
MOUNT
Mount the device firmly to your chosen location using a secure mounting method: Twosided adhesive, side mounting holes and/or pole mount bracket for threaded holes.
USING THE MAGNET
Wherever instructed to hold the magnet in place, do so at the spot indicated “X”.
- Count the number of LED blinks to the desired command.
- 1 LED blink corresponds to 1 second.
- Release the magnet from the hold position will end the command input
CONFIRM STATUS
1 LED Blink
- If the device is off, a solid blue light will appear from the status LED. Proceed to step 4.
- If the device is on, a solid green light followed by a red light will appear from the status LED. Proceed to step 5.
TOGGLE DEVICE ON/OFF
4 LED Blinks
- This will turn the device on/off.
- Confirm the device is setup using myViotel.
Note: battery consumption varies between continuous and triggered modes.
VIEW DATA
Please head over to your nodes Dashboard to begin seeing the data.
Product Descriptioin
| STATUS | |
| GREEN | On |
| BLUE | Off |
| RED | Device is busy |
| PURPLE | Confirming Command |
| COMMS | |
| BLUE | Communicating with server |
| YELLOW | Collecting GPS Coordinates |
| RED | Unable to Communicate |
OUR RESONANCE
Resonance describes the phenomenon of increased amplitude that occurs when a an external force or a vibrating system is equal or close to a natural frequency of the system on which it acts.
Leveraging decades of experience in earthquake analysis and monitoring of mining seismicity, Viotel have a deep understanding of resonance and have developed a unique series of asset management solutions involving monitoring and analysis of vibrations and waveforms.
The Viotel Wireless Accelerometer Node is an ultra-low noise triaxial MEMS sensor andself-contained with a digital communication interface.
It comes pre-programmed and ready to mount in the desired location and is suitable to measure the vibration modes in buildings.
www.viotel.co
sales@viotel.co
Documents / Resources
 |
VIOTEL V2.0 Accelerometer Vibration Node [pdf] User Guide V2.0 Accelerometer Vibration Node, V2.0, Accelerometer Vibration Node, Vibration Node, Node |
