VIMAR 46243.030CL Mpx Camera With Solar Panel User Guide

Camera Installation
Before installation, ensure that the positions do not affect connectivity and usage, especially for proper solar panel exposure.
Use the bracket and screws provided to mount the camera on a wall.

Installation Note: Avoid installing the camera in backlit or excessively bright conditions for optimal performance.

Operation

ON/OFF: Press the button for 3 seconds to turn the camera on or off.

Reset: Hold the button for 5 seconds to reset the camera.

Frequently Asked Questions (FAQ)

Q: What should I do if the status LED shows a red and blue alternate flashing?
- A: This indicates that the camera is connecting. If it persists for a long time, try reinserting the SIM card or resetting the camera.

Q: How do I know if the camera is successfully connected?
- A: The status LED will show a solid blue light when successfully connected.

Quick Guide

46243.030CL
4G LTE 3 Mpx PT camera with solar panel

Package content

Characteristics

*Status* *LED*	Red flashes slowly	Start up; wait for connection
	Red flashes fast	Connecting. If it remains in this state for a long time, try reinserting the SIM card or resetting the camera
	Alternate flashing red and blue	Difficulty connecting. Check the correct installation of the SIM and the availability of 4G LTE mobile data
	Blue flashes	Connecting to the camera in preview
	Solid blue light	Successfully connected
*Button*	ON/OFF	Press for 3 seconds to turn on/off
*Button*	Reset	Press and hold for 5 seconds for reset the camera

Installation

Inserting SIM card: Extract the slot using the supplied PIN, holding the camera with the speaker facing upwards.

Insert the nano SIM card;
Insert SD card for data storage. Note: Check that the cards are inserted correctly with the contacts facing upwards.

Attention! It is recommended to disable the SIM PIN code using a telephone.

Camera installation
Before installation, please check that the installation positions will not affect the connection and usage, especially to ensure that the solar panel can be fully illuminated.
Use the wall bracket to attach the camera to a wall using the screws in equipment.
Installation Notes: For better operating experience, avoid installing the camera in backlight or excessive light conditions.

Solar panel installation
Place the solar panel in an area with direct sunlight all year round.
The amount of energy produced by the solar panel is influenced by weather conditions, seasonal changes, geographical location, etc.

How To Position Your Solar Panel
Angle the solar panel according to your latitude. Point it south if in the northen hemisphere (example for Italy) and north if in the southern hemisphere.

Fix the base to your mounting location using the screws.
Install the locking screw cap into the universal joint.
Screw the universal joint into the back of the panel. Tighten it firmly the counter nut.

Screw the locking screw cap into the base.
Adjust the panel, loosening the locking screw capture the sleeve rod, and tighten the locking screw cap when the panel is in position.
Connect the panel to the camera.
Please check that all locking mechanisms are tightly secured.

Important! Wipe the face of the solar panel with a soft ,damp cloth regularly to clear any dust or debris.

Battery charging and configuration

Power up the camera

Attention, recharge the battery for at least 8 hours before first use, the solar panel is not able to recharge a completely discharged battery, proceed by connecting a power supply (5V 1A, not included) to the battery using the USB cable.
Turn on the camera and wait for the LED to status flashes, you will hear spoken feedback (“Camera ON”and then“ Camera setup ”).

ATTENTION: Rechargeable Lithium batteries, non-replaceable 2 x 3.7V / 4800 mAh.

Install the App on the smartphone
Download and install the Vimar “VIEW Product” App on your smartphone by searching for it directly in the App Reference store.

First access

If you already have a account for MyVIMAR.
Open the App and log in with their credentials.

Otherwise create a new account by tapping on the appropriate link “Create a new account “.
Carry out the following directions in the APP, enter credentials and proceed with step 4.4.

Add a camera

Follow the on-screen instructions to complete installation.

Adding via QR Code: use the camera to scan the displayed QR code on your smartphone.

Note: after turning on the camera, the status LED lights up as described in the “Status LED” table. After the beep, the device LED will flash rapidly.

Tap “Add device + 1

Select device 2
Enable next step, continue according to the instructions on the screen 3 and continue with the procedure to view the QR code.

4 A QR code will be displayed on the smartphone, face the phone screen towards the camera at a distance of 15-20 cm from the lens, a beep will sound after a few seconds, tap on “heard the beep”.
5 Wait for the connection to complete, after a few seconds the device will be successfully added and the solid blue LED will indicate the successful connection.

NOTE: If you encounter an offline problem, do the following

check the availability of data traffic from your operator;
try turning the camera off and on again;
check the battery charge.

ATTENTION: in order to safeguard your data and your own safety, in the case of returning the product it is recommended to delete the camera from the App where it is associated and remove the SIM and SD memory card.

The camera is also compatible with the application Smart Life.

For more information see the complete manuals and updated available in the product sheet on the site: https://faidate.vimar.com/it/it

*Specifications*
*Camera*	Image sensor	3 Megapixel CMOS
	Effective pixels	2304(H) × 1296(V)
	IR – IR distance	Night visibility 10 m
	Lens	3.0mm@F2.0, H:98° / D:120°
	Day/Night	Auto (ICR) / Color / B&W
*Video and* *Audio*	Encoding	H.265
	Audio In/Out	1 MIC/1 SPEAKER – included
	Live	25 fps
Funzioni *Functions*	Privacy function	Blanking of the video stream
	Alarm trigger	Human body detection
	Alarm trigger	Color vision at night with configurable white light illuminator and siren
Network *Network*	Communication Protocol	HTTP, DHCP, DNS, TCP/IP
4G LTE	– Transmission bands	– B1 (2100MHz) – B3 (1800MHz) – B7 (2600MHz) – B8 (900MHz) – B20 (800MHz)
*Battery* *and PIR*	Battery	9600 mAh Lithium rechargeable
	Work consumption	4,5 W Power supply not supplied)
	Rilevamento PIR	10 m Max, 120 °
*General*	Operating temperature	-10 °C to 50 °C
	Power supply	5 V DC 1 A
	IP – IP rating	IP65
	Storage	SD Card (Max128 G, not included) Protected movie recording
	Size (mm)	158 × 103 × 200mm
*Solar* *Panel*	Maximum Power (Pmax)	5 W
	Voltage (Vmp)	5 V
	Cable Length	3000 mm
	Dimensions	174 x 163 x 12,5 mm

Note: 4G LTE connection quality affect negatively on battery life.

Installation with solar panel included is recommended.

IMPORTANT WARNINGS

The LTE connection varies depending on the phone operator; check in advance the one in your area which guarantees best coverage and purchase the corresponding SIM card.
We recommend you use a SIM card with a data contract with traffic of at least 2 GB/month.
Before inserting the SIM card in the camera, disable the PIN code prompt.
To do this, insert the SIM card in your smartphone and follow the instructions provided to disable the PIN.

Main APN
TIM	ibox.tim.it
Vodafone	mobile.vodafone.it
Wind3	internet.it
Iliad	iliad

Operation disclaimer for cameras

The camera allows images to be viewed on the buyer’s (hereinafter “Customer”) smartphone and / or tablet, by simply installing the Vimar VIEW Product application.
The visualization of the images is allowed only through the presence of a connection with Internet access.
To use the service The Customer must have technical equipment that allows connection to the Internet and sign an agreement with an ISP (Internet Service Provider); this agreement may involve related costs. Vimar remains unaffected by the choice of technical equipment and the agreement with the ISP (Internet Service Provider). The consumption of data through the use of the Vimar VIEW

Product App, both in the home / building and outside the network that the Customer has used for installation, remains the responsibility of the Customer.

The interaction and correct operation remotely via the Vimar VIEW Product App, through the Internet network of your mobile phone / data provider, with the camera installed by the Customer may depend on

type, brand and model of the smartphone or tablet;

quality of the Wi-Fi signal or your mobile phone/data provider;
type of the home internet access contract;
type of data contract on the smartphone and tablet;

type of data contract on the 4G LTE camera

The camera supports connection via P2P technology, it is therefore necessary to check that your ISP (Internet Service Provider) does not block it.

We advise against installing the camera with the power supply unit constantly connected 24 hours a day. Too long a charging time could have negative effects on the performance and life of the battery.

Do not charge the battery with the power supply when the camera temperature is below 0 °C.
We recommend you charge the battery completely before use.

Vimar is exempt from any liability for any malfunctions due to non-compliance with the minimum technical specifications necessary for the operation of the product which are indicated above. To resolve any problems, refer to the complete manual and the “Questions and answers” section on the product page at the following Internet address: faidate.vimar.com .
Vimar reserves the right to modify the characteristics of the products shown at any time and without notice.

Conformity
RED directive. RoHS directive

Standards EN 301 908-2, EN 301 908-13, EN 301 489-52, EN IEC 62311, EN 62368-1, EN 55032, EN 55035, EN IEC 63000.

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity, the instruction manual and the configuration software are on the product sheet available at the following Internet address: faidate.vimar.com

The product contains batteries, please dispose of the product according to the reference requirements of your country.

WEEE – Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400m2, if they measure less than 25cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.

Privacy
Privacy Policy
As required by Regulation (EU) 2016/679 on the protection of personal data, Vimar S.p.A. guarantees that the electronic processing of data minimizes the use of personal and other identification information, which is only processed to the extent strictly necessary in order to achieve the purposes for which it was collected. The personal information of the Data Subject is processed in accordance with the product/application privacy policy available on our website www.vimar.com in the legal section (Product – App Privacy Policy – Vimar energie positive).

Please remember that, pursuant to Regulation (EU) 2016/679 on the protection of personal data, the user is the controller of processing for the data collected during use of the products and, as such, is responsible for adopting suitable security measures that protect the personal data recorded and stored, and avoid its loss. Should the camera monitor public areas, it will be necessary to display – in a visible manner – the information about the ‘area under video surveillance’ envisaged in the privacy policy and specified on the website of the Italian Data Protection Authority (Garante). The recordings may be stored for the maximum period of time envisaged by legal and/or regulatory provisions in the place where the camera has been installed. If the regulations in force in the country of installation envisage a maximum storage period for the image recordings, the user shall ensure they are deleted in compliance with the applicable regulations.

In addition, the user must guarantee safe possession of and control over its passwords and the related access codes to its web resources. The Data Subject must provide the password for access to its system when requesting help from the Vimar Support Centre, so that the related support can be provided. Provision of the password represents consent for processing. Each Data Subject is responsible for changing the password for access to its system on completion of the work carried out by the Vimar Support Centre.’

Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com

Documents / Resources

VIMAR 46243.030CL Mpx Camera With Solar Panel [pdf] User Guide
46243.030CL Mpx Camera With Solar Panel, 46243.030CL, Mpx Camera With Solar Panel, Camera With Solar Panel, Solar Panel, Panel

References

User Manual

VIMAR 46243.030CL Mpx Camera With Solar Panel

Product Usage Instructions

Installation

Battery charging and configuration

Operation disclaimer for cameras

Documents / Resources

References

Leave a comment

Cancel reply