LINEA
30403.x
CONNECTIONS
INSTALLATION
REGULATING THE TRIMMER
COVER REMOVAL
FEATURES
| Power supply | 120-240 V~ ± 10% 50/60 Hz |
| Output relay with clean change-over contact | 4 A 250 V~ cos φ 1 N.O. (NO SELV) |
| Typical absorption | 25 mA – 120 V~ 40 mA – 240 V~ |
| Operating temperature | -5 °C – +35 °C indoor use |
CONTROLLABLE LOADS AT 120-240 V~
Cycles
 |
Resistive loads | 4 A |
 |
Motors cos φ 0.6 | 2 A |
INSTALLATION RULES
The relay output power supply circuit must be protected against overcurrent’s by installing a device, a fuse with a rated breaking capacity of 1500 A or a type-C circuit breaker, with rated current not exceeding 10 A.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead
DEVICE DETAILS, CONFIGURATION AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art. 30403.B, which shares the same instructions sheet as art. 30403.x).
https://www.vimar.com/en/int/catalog/product/index/code/30403.B
49401724A0 03 2303
Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com
Documents / Resources
 |
VIMAR 30403.G LINEA Smart Switch [pdf] Instruction Manual 30403.G, 30602, 30403.G LINEA Smart Switch, LINEA Smart Switch, Smart Switch, Switch |
