VIMAR 14462.SL Connected RFID Outer Switch Silver
Product Information
Specifications
- Model: LINEA 30812.x
- Product Code: EIKON 20462
- Design: PLANA 14462
- Input Voltage: 100-240V~ 50/60 Hz
- Power Consumption: 1.1 W
- Wireless Frequency: 2400-2483.5 MHz
- RFID Frequency: 13.553-13.567 MHz
- Operating Range: < 100 mW (20 dBm)
Product Usage Instructions
Installation
- Ensure the power supply is within the range of 100-240V~ 50/60 Hz.
- Mount the device securely on a suitable surface using appropriate hardware.
- Connect the necessary cables following the labeled inputs (L,N, IN, NO, C).
Configuration
- Press and hold the configuration button for 5 seconds to enter setup mode.
- Use the LED indicators to navigate through different configuration options.
- Follow the user manual for specific configuration settings based on your requirements.
Usage
- Once installed and configured, the device is ready for operation.
- Monitor the LED indicators for status updates and system notifications.
- Refer to the user manual for troubleshooting and maintenance guidelines.
Frequently Asked Questions
Q: How can I download detailed device information and configuration settings?
A: You can download the PDF document with detailed device information and configuration settings from the product data sheet available on www.vimar.com. Use the QR code provided on the device to access this information.
Q: What should I do if the device does not power on?
A: Check the power supply and connections to ensure they are correctly set up. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support for assistance.
Q: Can this device be used with a voltage lower than 100V?
A: It is recommended to operate the device within the specified voltage range of 100-240V~ 50/60 Hz for optimal performance and safety. Using a lower voltage may affect the device’s functionality.
Download the View Wireless App from the stores onto the tablet/smartphone you will be using for configuration
You will need
Gateway | Art.
30807.x – 20597 – 19597 – 14597 |
FRONT VIEW AND CONNECTIONS
A | LED |
B |
Configuration button |
L | Phase |
N | Neutral |
IN | DND input |
NO |
Relay output |
C |
FEATURE
Rated supply voltage | 100-240 V~, 50/60 Hz |
Max. power absorption from the mains |
1,1 W |
RFID technology @ 13.56 MHz, ISO14443A Mifare standard | |
RF transmission power | 13,553-13,567 MHz |
Frequency range | < 60 dBμA/m |
Operating temperature: -5 °C – +45 °C (inside) | |
Configuration via View Wireless App for Bluetooth technology system | |
Frequency range | 2400-2483,5 MHz |
RF transmission power | < 100 mW (20 dBm) |
TERMINALS
L and N for power supply |
Relay output 16 A 240 V~ C-NO (NO SELV) |
Input for DND (Do Not Disturb) signalling via front LED (uninsulated) |
CONTROLLABLE LOADS
Heating 16(3,5) A (100.000 cycles | |
Resistive loads | 16 A |
Cos ø 0.6 motors | 3,5 A |
Cycles | ||
![]() |
5 A | 20.000 |
![]() |
0,5 A | 20.000 |
![]() |
100 W-240 V~
30 W-120 V~ |
20.000 |
![]() |
4 A | 20.000 |
INSTALLATION RULES
Do not connect a SELV circuit to the C-NO terminals as there is no double insulation with on the L-N terminals
- The device and the load controlled must be protected against overloads by installing a device, fuse or automatic 1-way switch, with a rated current not exceeding 16 A
- Do not install two access control devices in the same mounting frame
Important: The length of the cable for connection with the inputs must be no more than 30 m.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is on the product sheet available at the following Internet address: www.vimar.com.
DEVICE DETAILS, CONFIGURATION AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art. 30812.B, which shares the same instructions sheet as art. 30812.x-20462-19462-14462).
Viale Vicenza, 14
36063 Marostica VI – Italy www.vimar.com
Documents / Resources
![]() |
VIMAR 14462.SL Connected RFID Outer Switch Silver [pdf] Instruction Manual LINEA 30812.x, EIKON 20462, PLANA 14462, 14462.SL Connected RFID Outer Switch Silver, 14462.SL, Connected RFID Outer Switch Silver, RFID Outer Switch Silver, Outer Switch Silver, Switch Silver, Silver |