Product Information
Model No. VS19250 P/N: VB-WIFI-004
The VB-WIFI-004 is a Wi-Fi module designed for use with ViewSonic displays. It allows for wireless connectivity, enabling users to connect the display to a Wi-Fi network.
Product Overview
The VB-WIFI-004 is a compact module that can be easily installed into compatible ViewSonic displays. It features a USB A port for connection to the display and supports Wi-Fi standards 802.11 a/b/g/n/ac/ax. The module comes with a 1T1R dipole antenna for reliable wireless performance.
I/O Port
The VB-WIFI-004 module features a USB A port for connecting to the display.
Product Usage Instructions
Initial Setup
- Ensure the arrows on the module are facing outwards.
- Insert the module into the display as shown in the diagram below.
Installation
To install the VB-WIFI-004 module
- Ensure the arrows on the module are facing outwards.
- Insert the module into the display as shown in the diagram provided.
Specifications
Item | Specifications |
---|---|
Dimensions (W x H x D) | 208 x 30 x 20 mm (8.19 x 1.18 x 0.79 in) |
Weight | 0.85 kg (0.19 lb) |
Operating Condition | 2.4/5G |
Antenna | 1T1R dipole antenna |
Wi-Fi Standard | 802.11 a/b/g/n/ac/ax |
Frequency Modulation | 11b: DBPSK, DQPSK and CCK, and DSSS 11a/g: BPSK, QPSK, 16QAM, 64QAM, and OFDM 11n: BPSK, QPSK, 16QAM, 64QAM, and OFDM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM, and OFDM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, OFDM, and OFDMA BT: FHSS, GFSK, DPSK, and DQPSK |
Power | 5V DC, 1000mA |
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
Introduction
Overview Product
I/O Port
Initial Setup
Installation
- Ensure the arrows on the module are facing outwards.
- Insert the module into the display as shown in the diagram below.
Appendix
Specifications
Item | Specifications |
Dimensions (W x H x D) | 208 x 30 x 20 mm
(8.19 x 1.18 x 0.79 in) |
Weight | 0.85 kg (0.19 lb) |
Operating Condition | 0°C to 40°C (32°F to 104°F)
10% ~ 90% non-condensing |
Storage Condition | -20°C to 60°C (-4°F to 140°F)
10% ~ 90% non-condensing |
Antenna | 1T1R dipole antenna |
Wi-Fi Standard | 802.11 a/b/g/n/ac/ax |
Frequency | 2.4/5G |
Modulation |
|
Power | 5V DC, 1000mA |
Regulatory and Service Information
Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement
- CAN ICES-003(B) / NMB-003(B)
- FCC ID : 2AFG6-SI07B
- IC : 22166-SI07B
CE Conformity for European Countries
- The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU and Radio Equipment Directive (RED) 2014/53/EU.
- The full Declaration of Conformity can be found at the following website: https://www.viewsonicglobal.com/public/products_download/safety_compliance/acc/VB-WIFI-004_VS19250_CE_DOC.pdf
The following information is only for EU-member states
- The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
- In all EU member states, operation of 5150-5350MHz is restricted to indoor use only. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below
Substance | Proposed Maximum
Concentration |
Actual Concentration |
Lead (Pb) | 0.1% | < 0.1% |
Mercury (Hg) | 0.1% | < 0.1% |
Cadmium (Cd) | 0.01% | < 0.01% |
Hexavalent Chromium (Cr6⁺) | 0.1% | < 0.1% |
Polybrominated biphenyls (PBB) | 0.1% | < 0.1% |
Polybrominated diphenyl ethers (PBDE) | 0.1% | < 0.1% |
Bis(2-Ethylhexyl) phthalate (DEHP) | 0.1% | < 0.1% |
Benzyl butyl phthalate (BBP) | 0.1% | < 0.1% |
Dibutyl phthalate (DBP) | 0.1% | < 0.1% |
Diisobutyl phthalate (DIBP) | 0.1% | < 0.1% |
Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below.
Examples of exempted components are
- Copper alloy containing up to 4% lead by weight.
- Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
- Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
- Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.
Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
USA & Canada
https://www.viewsonic.com/us/go-green-with-viewsonic
Europe
https://www.viewsonic.com/eu/go-green-with-viewsonic
Taiwan
https://recycle.epa.gov.tw/
Copyright Information
- Copyright© ViewSonic® Corporation, 2022. All rights reserved.
- Macintosh and Power Macintosh are registered trademarks of Apple Inc.
- Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
- ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation.
- VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.
- Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
- In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
- No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
- VB-WIFI-004_UG_ENG_1a_20220707
Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product’s serial number.
Documents / Resources
![]() |
ViewSonic VB-WIFI-004 View Board Cast Button [pdf] User Guide VB-WIFI-004, VS19250, VB-WIFI-004 View Board Cast Button, VB-WIFI-004, View Board Cast Button, Board Cast Button, Cast Button, Button |