VIBE-logho

VIBE BD12D1SPL-V4 Watts Max Subwoofer

VIBE-BD12D1SPL-V4-Watts-Max-Subwoofer-product

Owners Manual

Congratulations on purchasing your VIBE subwoofer. Please read this manual in order to fully understand how to get the best results from this product and ensure that all advice on how to look after the product is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it.

Caution

  • Do not expose this product to damp or moisture – doing so may result in damage to the product.
  • Before wiring disconnect the cable from the positive battery terminal – failure to do so may result in electric shock or injury.
  • Ensure good and correct connections – failure to make the correct
  • connections may result in fire or damage to the product.
  • Do not use any functions of this equipment that may take your
  • concentration away from driving your vehicle – do not set up your amplifier whilst driving, doing so may result in an accident.
  • For prolonged setting up, make sure that your vehicle is stationary and in a safe location.
  • Keep the volume at a level so you can still hear outside noise – failure to do this may result in an accident.
  • VIBE equipment is capable of producing sound levels that can permanently damage your hearing.
  • VIBE recommends caution when listening at high volume.
  • For safe and enjoyable listening the sound should be comfortable and clear without distortion.

Wiring Connections

Please follow the wiring diagram below and ensure that correct polarity is observed as incorrect wiring may cause the subwoofer to be out of phase with the rest of the system and result in a loss of bass.

Series

  1. D1 : 2Ω Impedance
  2. D2 : 4Ω Impedance

VIBE-BD12D1SPL-V4-Watts-Max-Subwoofer- (2)Parallel

  1. D1 : 0.5Ω Impedance
  2. D2 : 1Ω Impedance VIBE-BD12D1SPL-V4-Watts-Max-Subwoofer- (3)

Run In Procedure

  • VIBE recommends that you follow the run in procedure for the subwoofer detailed below.
  • When your subwoofer is used for the first time, like most brand new items it is naturally very stiff and rigid. It will take time for the moving parts of this subwoofer to loosen up before the subwoofer will be ready to deliver its full potential.
  • For the first thirty hours it is recommended that you play the subwoofer at low to medium volumes, gradually increasing the volume level as time progresses. As a guide, if you listen to your subwoofer for one hour every day it will take a month for the subwoofer to run in properly.
  • You will notice a big change in the sound of the subwoofer over this period. As the spider and surround begin to run in, the sound will get deeper and harder, also the output of the subwoofer will increase as the suspension loosens up.
  • The subwoofer is like your car’s engine, it needs a few thousand miles before you can drive it to its full potential. Driving it into the redline from the first day will mean engine damage is certain and will not be covered by warranty.
  • Failure to follow this simple procedure is the most common reason for a subwoofer to fail after a very short period of time.

Specification

Model BD12D1SPL-V4 BD12D2SPL-V4 BD15D1SPL-V4 BD15D2SPL-V4
Speaker Size 12” (323mm) 12” (323mm) 15” (392mm) 15” (392mm)
Peak/RMS Power 9000W/3000W 9000W/3000W 9000W/3000W 9000W/3000W
Sensitivity 84dB 84dB 87dB 86dB
Frequency Response 25Hz – 850Hz 15Hz – 850Hz 15Hz – 850Hz 15Hz – 850Hz
Impedance Dual 1Ω Dual 2Ω Dual 1Ω Dual 2Ω
Voice Coil 3” USA 70mm winding 3” USA 70mm winding 3” USA 70mm winding 3” USA 70mm winding
Top Plate 20mm black anodised 20mm black anodised 20mm black anodised 20mm black anodised
T-Yoke 25mm black anodised 25mm black anodised 25mm black anodised 25mm black anodised
Magnet Weight 200Oz 200Oz 200Oz 200Oz
Mounting Depth 11.2” (285mm) 11.2” (285mm) 11.8” (300mm) 11.8” (300mm)
Mounting Diameter 11.9” (301mm) 11.9” (301mm) 14.8” (375mm) 14.8” (375mm)
Enclosure Volume 2 – 3ft3 2 – 3ft3 3 – 5ft3 3 – 5ft3

TS Parameters

 

Parameter

 

BD12D1SPL-V4

 

BD12D2SPL-V4

 

BD15D1SPL-V4

 

BD15D2SPL-V4

Re 3.8Ω 3.8Ω
Levc 855.324mH 1.435mH 821.719mH 11.410mH
F0 39.876Hz 39.723Hz 35.58Hz 36.654Hz
Sd 45.239 45.239 75.477 75.477
BL 14.084Tm 17.416Tm 14.465Tm 18.199Tm
Qms 2.416 2.641 2.221 2.445
Qes 0.760 0.929 0.804 1.000
Qts 0.578 0.687 0.591 0.710
No 0.183% 0.167% 0.333% 0.272%
SPL 84.6dB 84.2dB 87.2dB 86.4dB
Vas 12.672 12.298 35.923 33.893
Cms 43.606uM/N 42.319uM/N 44.408uM/N 41.844uM/N
Mms 247.711g 232.649g 314.572g 317.661g
Mmd 242.178mkg 227.116mkg 302.648mkg 305.738mkg
X-Max 25mm 25mm 25mm 25mm
X-Mech 38mm 38mm 38mm 38mm

Limited Warranty

All VIBE products carry a full 12 month warranty, valid from the date of the  original receipt and proof of purchase (UK only). The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem at any stage during the warranty period, it should be returned to the point of purchase in its original packaging, and complete with no items missing.
A full description of VIBE’s warranty information can be found on our website: www.vibeaudio.co.uk

What Is Not Covered

  • Damage to product due to improper installation.
  • Subsequent damage to other components.
  • Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV radiation.
  • Damage through negligence, misuse, accident or abuse. Repeated returns for the same fault may be considered abuse.
  • Any cost or expense related to the removal and / or re-installation of the product.
  • Damage caused by amplifier clipping or distortion.
  • Items repaired or modified by any unauthorised repair facility.
  • Return shipping on nondefective items.
  • Products returned without a returns authorization number.
  • Damage to product due to use of sealant.

International Warranty

Contact your international VIBE dealer or distributor concerning specific procedure for your  country’s warranty policies. www.vibeaudio.co.uk

Warning
VIBE equipment is capable of sound pressure levels that can cause permanent damage to your  hearing and those around you. Please use common sense when listening to your audio system  and practice safe sound.

Copyright
All content included in this manual such as text, graphics, logos, icons, images and data, are the property of Midbass Distribution Limited t/a VIBE Technologies Limited (herein referred to as “VIBE”, “us” or “we”) and its affiliate or their content and technology providers, and are protected by United Kingdom and International copyright laws. All rights reserved. VIBE TV, VIBE Arcade, Bass Box, Optisound, Cinesound, BlackAir, BlackBox, Space, LiteAir, SLICK, BlackDeath, Bubonic, Reaper, Anti-VIBE, FastPlug, BlackHole, QB69, VIBE Turbo Port, Vibe TurboVent, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, ICC, Bass Enhance, Bass Enhance+, QBass, SpeedBass, PowerBass, N-Wedge, Box Grip, ARBSS, Supercar Series and all stylised representations of product names, or the abbreviations of product names, as logos are all trademarks of VIBE. Graphics and logos are trademarks or trade dress of VIBE Technologies Ltd or its subsidiaries. VIBE’s trademarks and trade dress may not be used in connection with any product or service that is not VIBE’s, in any manner that is likely to cause confusion among customers or in any manner that disparages or discredits VIBE. All other trademarks not owned by VIBE or its subsidiaries that appear in this manual are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by VIBE or its subsidiaries.

TO THE FULLEST EXTENT PERMITTED AT LAW, VIBE IS PROVIDING THIS MANUAL AND ITS CONTENT ON AN “AS IS” BASIS AND MAKES  NO (AND EXPRESSLY DISCLAIMS ALL) REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THIS MANUAL OR THE INFORMATION, CONTENT, MATERIALS OR PRODUCTS INCLUDED IN THIS MANUAL INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN ADDITION, VIBE DOES NOT REPRESENT OR WARRANT THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. VIBE RECOMMEND CAUTION WHEN LISTENING TO MUSIC REPRODUCED THROUGH VIBE EQUIPMENT. VIBE EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND PRESSURE LEVELS THAT CAN PERMANENTLY DAMAGE HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE CLEAR WITHOUT DISTORTION AT A COMFORTABLE VOLUME. BY USING ANY VIBE EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU HAVE PURCHASED. USE OF ANY VIBE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER. Except as specifically stated in this manual, to the fullest extent permitted at law, neither VIBE nor any of its affiliates, directors, employees or other representatives will be liable for damages arising out of or in connection with the use of this manual or the information, content, materials or products included. This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or consequential damages, loss of data, income or profit, loss of or damage to property and claims of third parties. For the avoidance of doubt, VIBE does not limit its liability for death or personal injury to the extent only that it arises as a result of negligence of VIBE, its affiliates, directors, employees or other representatives.

UK Technical Enquiries
Call 09067031420
Calls cost 50p per minute. Call costs correct 01/02/12 Hours of business 9.00am – 5.30pm GMT Monday – Friday. All calls are recorded for training purposes.

MIDBASS Distribution
PO Box 11000
B75 7WGVIBE-BD12D1SPL-V4-Watts-Max-Subwoofer- (4)

International Technical Enquiries

For international technical support please contact the distribution agent for your country. Please visit www.vibeaudio.co.uk for more details VIBE-BD12D1SPL-V4-Watts-Max-Subwoofer- (5)

Designed and engineered in England

VIBE-BD12D1SPL-V4-Watts-Max-Subwoofer- (1)

FAQ

  • Q: What should I do if my product has an issue during the warranty period?
    A: If your VIBE product develops a problem within the 12-month warranty period, return it to the point of purchase with the original packaging and all items intact. Complete the online warranty card within seven days of purchase.
  • Q: How should I handle international warranty claims?
    A: Contact your international VIBE dealer or distributor for  specific procedures regarding your country’s warranty policies.
  • Q: How do I ensure safe listening levels with VIBE equipment?
    A: Exercise caution when listening at high volumes to prevent permanent hearing damage. Keep sound levels comfortable and clear without distortion.

Documents / Resources

VIBE BD12D1SPL-V4 Watts Max Subwoofer [pdf] User Manual
BD12D1SPL-V4, BD12D2SPL-V4, BD15D1SPL-V4, BD15D2SPL-V4, BD12D1SPL-V4 Watts Max Subwoofer, BD12D1SPL-V4, Watts Max Subwoofer, Max Subwoofer

References

Leave a comment

Your email address will not be published. Required fields are marked *