Giới thiệu
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Apple Watch Series 11 GPS + Cellular 42mm. This particular unit is a renewed product, professionally inspected and tested by Amazon-qualified suppliers to ensure full functionality. Please note that while the device is fully functional, accessories may not be original and the product may arrive in a generic box.
Cài đặt
1. Mở hộp và sạc ban đầu
Carefully remove the Apple Watch and its accessories from the packaging. Connect the charging cable to the watch and a power adapter, then plug it into a power outlet. Allow the watch to charge until it reaches 100% before proceeding with setup. The battery capacity of this renewed product is guaranteed to exceed 80% relative to new.
Image: Apple Watch Series 11 and its charging cable, illustrating the unboxing process from a generic package. The watch face is visible, alongside the magnetic charging puck.
2. Ghép nối với iPhone
To pair your Apple Watch Series 11, you must have an iPhone 11 or a later model. Ensure your iPhone is updated to the latest version of iOS and has Bluetooth enabled. Turn on your Apple Watch by pressing and holding the side button until the Apple logo appears. Bring your iPhone near your Apple Watch, and a pairing prompt will appear on your iPhone. Follow the on-screen instructions to complete the pairing process. If the prompt does not appear, open the Apple Watch app on your iPhone and tap 'Start Pairing'.
Lưu ý quan trọng về khả năng tương thích: The Apple Watch Series 11 requires an iPhone 11 or a newer iPhone model to function. It is not compatible with older iPhone models such as the iPhone XS Max or earlier.
3. Cấu hình ban đầu
During setup, you will be guided through configuring settings such as wrist preference, passcode, Activity goals, and cellular plan activation (for GPS + Cellular models). You can also restore from a previous Apple Watch backup if available.
Hướng dẫn sử dụng Apple Watch
Điều hướng cơ bản
- Vương miện kỹ thuật số: Rotate to scroll, zoom, or adjust values. Press once to go to the watch face or app list. Double-press to switch between recently used apps. Press and hold for Siri.
- Nút bên: Press once to open the Dock (recently used apps). Double-press for Apple Pay. Press and hold for Emergency SOS or to power off the watch.
- Màn hình cảm ứng: Tap to select, swipe to navigate, force touch (press firmly) for additional options in some apps.
Image: Apple Watch Series 11 with Natural Titanium Case and Natural Milanese Loop, worn on a wrist, showcasing a vibrant watch face. This illustrates typical wear and display functionality.
Các tính năng chính
- GPS + Cellular: Allows you to make calls, send messages, and stream music without your iPhone nearby, provided you have an active cellular plan.
- Theo dõi sức khỏe: Includes features for heart rate tracking, ECG, blood oxygen monitoring, hypertension notifications, and advanced sleep tracking with a new "Sleep Score."
- Theo dõi hoạt động: Monitor your daily movement, exercise, and standing hours with the Activity rings.
- Thông báo: Receive alerts from your iPhone apps directly on your wrist.
BẢO TRÌ
Vệ sinh Apple Watch
To clean your Apple Watch, power it off and disconnect it from the charger. Wipe the watch and band with a non-abrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water. Avoid using soaps, cleaning products, abrasive materials, or compressed air. Ensure the watch is completely dry before charging or wearing it again.
Image: A close-up of an Apple Watch Series 11 being gently wiped with a soft, lint-free cloth, demonstrating proper cleaning technique for the display and case.
Chăm sóc pin
Your renewed Apple Watch Series 11 is guaranteed to have a battery capacity exceeding 80% of a new battery. To maximize battery lifespan, avoid extreme temperatures and keep the watch charged between 20% and 80% when possible. Fully charging and discharging occasionally can also help calibrate the battery.
Cập nhật phần mềm
Keep your Apple Watch updated to the latest WatchOS version for optimal performance and security. Updates are managed through the Apple Watch app on your paired iPhone.
Chống nước
The Apple Watch Series 11 is water resistant, but not waterproof. It can be used for shallow-water activities like swimming in a pool or ocean. It should not be used for scuba diving, waterskiing, or other activities involving high-velocity water or submersion below shallow depths. Water resistance may decrease over time and cannot be rechecked or resealed.
Xử lý sự cố
Các vấn đề thường gặp và giải pháp
- Xem phim Not Pairing: Ensure your iPhone is an iPhone 11 or later and running the latest iOS. Check that Bluetooth is enabled on your iPhone and the watch is charged. Try restarting both devices.
- Tuổi thọ pin kém: Review background app refresh settings, disable unnecessary notifications, and ensure WatchOS is up to date.
- Ứng dụng không phản hồi: Force quit the app by pressing the side button, then rotating the Digital Crown to scroll to the app, swiping left, and tapping the 'X'. Then reopen the app.
- Xem không bật: Ensure the watch is fully charged. If it still doesn't turn on, try a force restart (press and hold both the side button and Digital Crown for at least 10 seconds until the Apple logo appears).
If issues persist, consider unpairing and re-pairing your Apple Watch, or performing a factory reset. For a factory reset, go to Settings > General > Reset > Erase All Content and Settings on your watch. This will erase all data and settings and unpair the watch from your iPhone.
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | A3335 |
| Kích thước hộp | 42mm |
| Vật liệu vỏ máy | Titan tự nhiên |
| Loại băng tần | Natural Milanese Loop |
| Kết nối | GPS, Cellular, Bluetooth |
| Hệ điều hành | Watch OS 26 |
| Dung lượng lưu trữ bộ nhớ | 64GB |
| Trọng lượng sản phẩm | 34.6 gam (1.22 ounce) |
| Loại pin | 1 Nonstandard Battery |
| Kích thước màn hình | 42 milimét |
Hình ảnh: Phía sau view of the Apple Watch Series 11, highlighting the optical heart sensor and other sensors, along with the model number and regulatory markings.
Bảo hành và Hỗ trợ
Renewed Product Warranty
This renewed Apple Watch Series 11 is eligible for a replacement or refund within 90 days of receipt if you are not satisfied. This warranty is provided by the Amazon-qualified supplier. Please refer to your purchase documentation for specific details regarding returns and replacements.
Hỗ trợ khách hàng
For further assistance, please contact the seller directly through your Amazon order history. For general information about Apple Watch features and software, you can visit the official Apple Support webđịa điểm.