Hướng dẫn sử dụng máy làm sạch siêu âm TOOLCRAFT USC-650

1. Sản phẩm hếtview

The TOOLCRAFT USC-650 is a powerful ultrasonic cleaner designed for reliable removal of dirt and incrustations from various objects. Utilizing implosive cavitation bubbles, it effectively cleans even hard-to-reach areas. Its robust and durable 6.5-liter stainless steel tank, equipped with a drain tap and a removable basket, makes it suitable for a wide range of applications, including mechanical parts, tools, surgical instruments, dentures, print heads, jewelry, and glasses.

The unit features analog controls for both temperature (adjustable from 30°C to 80°C) and time (adjustable from 0 to 30 minutes), providing flexible operation. With a power output of 180 watts, the USC-650 ensures thorough and comprehensive cleaning.

Hình 1.1: Mặt trước view of the TOOLCRAFT USC-650 Ultrasonic Cleaner, showing the control panel with temperature and timer knobs, and indicator lights.

2. Thông tin an toàn

Please read and understand all safety instructions before operating the ultrasonic cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• An toàn điện:
  • Đảm bảo thiết bị được kết nối với ổ cắm có nối đất đúng cách.
  • Do not operate the unit with wet hands or in wet environments.
  • Không nhúng bộ phận chính vào nước hoặc các chất lỏng khác.
  • If the power cord or plug is damaged, do not use the unit. Contact qualified personnel for repair.
• An toàn vận hành:
  • Do not operate the ultrasonic cleaner without water in the tank. This can cause damage to the unit.
  • Always ensure the water level is above 2/3 of the tank capacity when operating.
  • Caution: Hot liquid and risk of scalding. The cleaning solution can become very hot, especially when the heating function is active. Handle with care.
  • Do not pour flammable, corrosive, or highly volatile liquids into the tank. Use only recommended cleaning solutions.
  • Ensure proper ventilation when operating, especially if using cleaning solutions that produce fumes.
  • Giữ thiết bị xa tầm tay trẻ em và vật nuôi.
• An toàn bảo trì:
  • Luôn rút phích cắm thiết bị trước khi vệ sinh hoặc bảo trì.
  • Allow the unit to cool down completely before draining or cleaning.

3. Nội dung gói hàng

Please check the package contents upon unpacking to ensure all items are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

• TOOLCRAFT USC-650 Ultrasonic Cleaner Unit
• Nắp thép không gỉ
• Rổ vệ sinh
• Dây nguồn
• Hướng dẫn sử dụng (tài liệu này)

Hình 3.1: Trên cùng view of the ultrasonic cleaner with the lid removed, showing the internal stainless steel tank and the included cleaning basket.

4. Tính năng sản phẩm

• Sức chứa lớn: 6.5-liter stainless steel tank for cleaning a variety of items.
• Kết cấu bền bỉ: Robust stainless steel tank designed for longevity.
• Integrated Drain Tap: For easy and convenient draining of used cleaning solution.
• Removable Cleaning Basket: Protects delicate items and allows for easy retrieval.
• Analog Temperature Control: Adjustable heating from 30°C to 80°C for optimal cleaning results.
• Analog Timer Control: Adjustable cleaning cycles from 0 to 30 minutes.
• Công suất đầu ra cao: 180W ultrasonic power for effective cleaning.
• Ứng dụng đa năng: Ideal for jewelry, tools, mechanical parts, dentures, glasses, and more.

5. Thiết lập

1. Tháo hộp đựng thiết bị: Cẩn thận lấy máy làm sạch siêu âm và tất cả phụ kiện ra khỏi bao bì. Giữ lại bao bì để bảo quản hoặc vận chuyển trong tương lai.
2. Chọn vị trí: Place the unit on a stable, level, and heat-resistant surface. Ensure there is adequate ventilation around the unit and that it is away from direct sunlight or heat sources.
3. Đổ đầy bình: Open the lid and fill the stainless steel tank with an appropriate cleaning solution or distilled water. Ensure the liquid level is between the "MIN" and "MAX" marks, and always above 2/3 of the tank capacity. Không đổ quá đầy.
4. Đặt các mặt hàng vào giỏ hàng: Place the items to be cleaned into the cleaning basket. Avoid overcrowding the basket. Lower the basket gently into the tank. Ensure items are fully submerged but not touching the bottom of the tank directly.
5. Đóng nắp: Place the lid securely on the tank.
6. Kết nối nguồn: Cắm dây nguồn vào ổ cắm điện của thiết bị, sau đó cắm đầu còn lại vào ổ cắm điện có nối đất.

Hình 5.1: Mặt bên view illustrating the drain tap and handle for easy handling and liquid disposal.

6. Hướng dẫn vận hành

1. Bật nguồn: Ensure the unit is properly set up and plugged in.
2. Cài đặt nhiệt độ (Tùy chọn): If heating is desired, turn the "HEATING" knob (left knob) clockwise to set the desired temperature between 30°C and 80°C. The "HEATING" indicator light will illuminate. The heater will turn off automatically once the set temperature is reached.
3. Đặt thời gian vệ sinh: Turn the "ULTRASONIC" knob (right knob) clockwise to set the desired cleaning time between 0 and 30 minutes. The "ULTRASONIC" indicator light will illuminate, and the ultrasonic cleaning process will begin.
4. Vệ sinh màn hình: Allow the unit to operate for the set duration. The ultrasonic action will generate a gentle humming sound.
5. Kết thúc chu kỳ: Once the set time has elapsed, the ultrasonic cleaning will automatically stop, and the "ULTRASONIC" indicator light will turn off. If heating was active, it will continue until manually turned off or the temperature drops below the set point.
6. Xóa mục: Carefully open the lid. Using the basket, lift the cleaned items out of the tank. Rinse the items under clean water if necessary and dry them thoroughly.
7. Tắt nguồn: Turn both the "HEATING" and "ULTRASONIC" knobs to the "OFF" position. Unplug the unit from the power outlet.

Hình 6.1: Chi tiết view of the control panel, highlighting the analog temperature and timer controls for precise operation.

7. Bảo trì và vệ sinh

Bảo trì thường xuyên sẽ đảm bảo tuổi thọ và hiệu suất tối ưu cho máy làm sạch siêu âm của bạn.

• Xả bể: After each use, especially if using a cleaning solution, drain the tank. Ensure the unit is unplugged and has cooled down. Use the drain tap located on the side of the unit to empty the liquid into a suitable container.
• Rinsing the Tank: Rinse the stainless steel tank with clean water to remove any residue. Wipe the inside of the tank with a soft, damp vải. Không sử dụng chất tẩy rửa mài mòn hoặc miếng cọ rửa.
• Vệ sinh bên ngoài: Wipe the exterior of the unit with a soft, dry or slightly damp vải. Không sử dụng hóa chất hoặc dung môi mạnh.
• Kho: When not in use, ensure the tank is empty and dry. Store the unit in a cool, dry place, away from direct sunlight and moisture.
• Basket Care: Clean the cleaning basket regularly to prevent buildup.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your TOOLCRAFT USC-650, refer to the table below for common problems and their solutions.

9. Thông số kỹ thuật

10. Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Information regarding spare parts availability for this model is currently unavailable.

When contacting support, please have your product model number (TO-9916173) and purchase details ready.