Xe tải quái vật Corally Punisher 4S - Hướng dẫn sử dụng

1. Giới thiệu

Welcome to the world of high-performance RC vehicles with your new Corally Punisher 4S Monster Truck. This Ready-to-Run (RTR) model is engineered for durability, speed, and thrilling off-road performance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your vehicle to ensure a safe and enjoyable experience.

Figure 1.1: The Corally Punisher 4S Monster Truck, showcasing its robust design and vibrant green accents.

2. Thông tin an toàn

Operating remote control vehicles requires caution. Please read and adhere to the following safety guidelines:

• Luôn vận hành xe ở những khu vực thoáng đãng, tránh xa người, vật nuôi và chướng ngại vật.
• Do not operate near public roads, power lines, or water bodies.
• Keep hands, face, and loose clothing away from moving parts.
• Ensure batteries are charged correctly and handled safely. Disconnect batteries when not in use.
• This product is not a toy. Recommended for ages 14 months and up, adult supervision is advised for younger users.
• Do not modify the vehicle. Unauthorized modifications can lead to malfunction and void warranty.

3. Nội dung gói hàng

Xác minh rằng tất cả các thành phần đều có trong gói:

• 1 x Corally Punisher 4S Monster Truck (RTR Version)
• 1 x Điều khiển từ xa
• 4 x Pin AA (cho điều khiển từ xa)
• Hướng dẫn sử dụng (tài liệu này)

The vehicle comes equipped with a Torox 135 ESC, CR-HV 7225 digital servo, and a powerful Kuron 725 electric motor, along with a 2.4GHz 2-channel radio system for responsive control.

4. Thiết lập

4.1. Lắp đặt pin máy phát

1. Hãy tìm ngăn chứa pin ở phía sau bộ điều khiển từ xa 2.4GHz.
2. Trượt mở nắp pin.
3. Lắp 4 pin AA, đảm bảo lắp đúng cực (+/-).
4. Đóng chặt nắp pin.

4.2. Vehicle Battery Installation (Not Included)

The Corally Punisher 4S requires a 3S or 4S LiPo battery (not included). Ensure the battery is fully charged before installation.

1. Tháo các kẹp giữ thân xe và nâng thân xe lên.
2. Locate the adjustable XL battery holder on the chassis.
3. Securely place the charged LiPo battery into the battery tray.
4. Connect the battery to the ESC (Electronic Speed Controller). Ensure the connection is firm.
5. Replace the truck body and secure it with the body clips.

Hình 4.1: Mặt bên view of the Corally Punisher 4S, showing the chassis and wheel assembly, where the battery tray is located.

5. Hướng dẫn vận hành

5.1. Bật nguồn

1. Turn on the transmitter first. The power indicator light should illuminate.
2. Turn on the power switch on the vehicle's ESC. You will hear a series of beeps, indicating successful connection.
3. Wait for the ESC to initialize. The steering servo should respond to transmitter input.

5.2. Hệ thống điều khiển lái xe

• Vô lăng: Rẽ trái hoặc phải để điều khiển hướng đi của xe.
• Kích hoạt bướm ga: Pull to accelerate forward, push to brake or reverse.
• Tay lái: Adjust if the vehicle pulls to one side when the steering wheel is centered.
• Tiết kiệm ga: Adjust if the vehicle moves forward or backward when the throttle trigger is centered.

5.3. Mẹo lái xe

• Start with gentle throttle inputs to get a feel for the vehicle's power.
• Practice steering and braking in an open area before attempting high-speed maneuvers.
• Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
• The integrated compact wheelie bar helps manage wheelies during aggressive acceleration.

Figure 5.1: Front-right and rear-right views of the Corally Punisher 4S, illustrating its robust chassis and large tires designed for aggressive driving.

6. Bảo trì

Regular maintenance ensures the longevity and optimal performance of your Corally Punisher 4S.

6.1. Sau mỗi lần chạy

• Vệ sinh xe: Use a soft brush or compressed air to remove dirt, dust, and debris from the chassis, suspension, and drivetrain. Avoid using water directly on electronics.
• Kiểm tra xem có hư hỏng không: Check for bent or broken parts, loose screws, or damaged wiring. Pay attention to the suspension arms, shock absorbers, and drive shafts.
• Kiểm tra lốp: Ensure tires are securely mounted and free from punctures or excessive wear.
• Ngắt kết nối pin: Always disconnect the main battery from the ESC after use.

6.2. Bảo dưỡng định kỳ

• Bôi trơn các bộ phận chuyển động: Apply a small amount of silicone grease to moving parts like universal joints and pivot balls.
• Check Bearings: Inspect ABEC 3 rubber-sealed ball bearings for smooth operation. Replace if they feel gritty or stiff.
• Bộ giảm xóc: Check for leaks and ensure smooth damping action. Refill or replace shock oil as needed.
• Gear Mesh: Verify the gear mesh between the motor pinion and spur gear is correct to prevent premature wear.

Figure 6.1: Rear-left view of the Corally Punisher 4S, highlighting the rear suspension and wheelie bar, critical areas for regular inspection.

KHAI THÁC. Xử lý sự cố

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the official Corally webhoặc liên hệ với đại lý được ủy quyền của bạn. Giữ lại hóa đơn mua hàng để yêu cầu bảo hành.

Bạn nên đăng ký sản phẩm của mình với nhà sản xuất. website if available, to receive updates and support.