GreenYi DV4T-19G490-AB Rear View Hướng dẫn sử dụng camera dự phòng

1. Giới thiệu

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi DV4T-19G490-AB Rear View Backup Camera. This camera is designed as a direct replacement for specific Ford models, enhancing your vehicle's rear visibility and safety.

Các mẫu xe tương thích:

• Ford Escape: 2013, 2014, 2015, 2016, 2017
• Ford Kuga: 2013, 2014, 2015, 2016, 2017

Replaces Original Equipment (OE) Part Numbers:

• EV4T-19G490-CA
• EV4T19G490CA
• DV4T-19G490-AB
• DV4T19G490AB

2. Thông tin an toàn

Always prioritize safety during installation and operation. Ensure the vehicle is turned off and the parking brake is engaged before beginning any installation procedures. Consult a professional if you are unsure about any steps.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng:

• 1 x GreenYi Rear View Backup Camera (DV4T-19G490-AB)
• 1 x Thẻ cảm ơn

4. Tính năng sản phẩm

• Star Night Vision: The camera system provides clear visual clarity in various lighting conditions, including low light, ensuring enhanced safety and convenience.
• Xếp hạng chống nước IP68: Designed with IP68 waterproofing, the camera ensures reliable performance regardless of weather conditions, including heavy rain or car washes. Its robust metal housing contributes to strength, durability, and resistance to wear and deformation.
• Cài đặt dễ dàng: Engineered for seamless integration, serving as a direct replacement for the original backup camera part. It supports coding with original features and utilizes a plug-and-play mechanism, eliminating the need for complex wiring.

Image: Comparison illustrating the superior night vision clarity of the GreenYi camera.

Image: The camera is shown with water, highlighting its IP68 waterproof design for all-weather reliability.

5. Thiết lập và Cài đặt

The GreenYi backup camera is designed for a direct, plug-and-play replacement. Follow these general steps for installation. Specific vehicle disassembly may vary.

1. Chuẩn bị xe: Ensure the vehicle is turned off and the parking brake is engaged. For safety, disconnect the negative terminal of the car battery.
2. Access the Existing Camera: Locate the original backup camera, typically integrated into the tailgate handle or emblem. Carefully remove any trim panels or the emblem covering the camera.
3. Tháo máy ảnh cũ: Disconnect the wiring harness from the old camera. Unscrew or unclip the old camera from its mounting location.
4. Cài đặt Camera mới: Connect the GreenYi DV4T-19G490-AB camera to the vehicle's existing wiring harness. Ensure the connection is secure.
5. Mount the New Camera: Secure the new camera into the original mounting position. Reattach any removed trim panels or the emblem.
6. Chức năng kiểm tra: Reconnect the car battery. Start the vehicle and shift into reverse to verify the camera's operation on the infotainment screen.

6. Hoạt động

The GreenYi DV4T-19G490-AB Rear View Backup Camera operates automatically. When the vehicle is shifted into reverse gear, the camera feed will display on your vehicle's infotainment screen, providing a clear view of the area behind your vehicle. Dynamic guidelines may appear on the screen to assist with parking and maneuvering.

Image: Depicts the camera's wide-angle view on a vehicle's display, showing parking guidelines.

7. Bảo trì

• Vệ sinh ống kính: Thường xuyên vệ sinh ống kính máy ảnh bằng khăn mềm,amp cloth to ensure a clear image. Avoid abrasive cleaners or materials that could scratch the lens.
• Kiểm tra kết nối: Periodically check the wiring connections for any signs of wear, corrosion, or looseness.
• Quan tâm chung: While the camera is waterproof, avoid directing high-pressure water jets directly at the lens or housing for extended periods.

KHAI THÁC. Xử lý sự cố

• Không có hình ảnh trên màn hình:
  • Kiểm tra tất cả các mối nối dây để đảm bảo chúng được cắm chắc chắn.
  • Verify that the vehicle is properly shifted into reverse.
  • Ensure the vehicle's infotainment system is functioning correctly.
• Hình ảnh mờ hoặc bị biến dạng:
  • Hãy lau sạch ống kính máy ảnh.
  • Check for any physical damage to the camera or lens.
  • Đảm bảo máy ảnh được gắn chắc chắn và không bị rung.
• Tín hiệu không liên tục:
  • Kiểm tra hệ thống dây điện xem có bất kỳ kết nối lỏng lẻo hoặc hư hỏng nào không.
  • Ensure there are no external interferences (e.g., aftermarket electronics) affecting the signal.

If issues persist after following these steps, contact GreenYi customer support for further assistance.

9. Thông số kỹ thuật

Image: Detailed dimensions of the camera unit for reference.

10. Bảo hành và Hỗ trợ

For warranty information or technical support, please refer to the documentation included with your product or contact GreenYi customer service directly. Keep your purchase receipt for warranty claims.