Philips Ultinon Access LED H7 Headlight Bulb Instruction Manual

1. Giới thiệu

Thank you for choosing Philips Ultinon Access LED H7 headlight bulbs. These bulbs are designed to provide superior illumination and a modern aesthetic for your vehicle. Featuring an ultra-compact, direct-fit design, they offer up to 80% more brightness compared to standard halogen bulbs and a cool white light at 6000 Kelvin.

This manual contains important information regarding the safe installation, operation, and maintenance of your Philips Ultinon Access LED H7 bulbs. Please read it thoroughly before installation and keep it for future reference.

Important Note: These Philips Ultinon Access LED bulbs are not compliant with ECE R37 regulations and are intended for off-road use only. It is your responsibility to ensure that the use of these retrofit LED lamps complies with the legal requirements in force in your country.

Image 1.1: Philips Ultinon Access LED H7 Headlight Bulb

2. Thông tin an toàn

• Always ensure your vehicle's engine is off and the ignition is switched off before attempting any installation or maintenance.
• Allow existing bulbs to cool down completely before handling, as they can be extremely hot.
• Wear appropriate safety gear, such as gloves and eye protection, during installation.
• Avoid touching the glass or LED components of the new bulb directly with bare hands. Use gloves or a clean cloth.
• Do not look directly into the illuminated LED bulb, as the intense light can cause eye strain or damage.
• Keep bulbs out of reach of children.
• Hãy vứt bỏ bóng đèn cũ và bao bì một cách có trách nhiệm theo quy định của địa phương.
• Tuân thủ pháp luật: As stated, these bulbs are for off-road use only and may not be street legal in all regions. Verify local regulations before use on public roads.

3. Nội dung gói hàng

Your Philips Ultinon Access LED H7 headlight bulb package typically includes:

• 2 x Philips Ultinon Access LED H7 Headlight Bulbs

Vui lòng kiểm tra nội dung kiện hàng khi nhận để đảm bảo tất cả các mặt hàng đều đầy đủ và không bị hư hỏng.

4. Thiết lập và Cài đặt

The Philips Ultinon Access LED H7 bulbs are designed for a direct 1:1 replacement of halogen bulbs, offering a simple 'plug & play' installation. No additional accessories are typically required.

Các bước cài đặt:

1. Sự chuẩn bị: Ensure your vehicle is turned off, the engine is cool, and the parking brake is engaged. Open the hood to access the headlight assembly.
2. Locate Headlight: Identify the headlight housing and the access point for the bulb. This may involve removing a cover or panel.
3. Tháo bóng đèn cũ: Disconnect the electrical connector from the existing halogen bulb. Unclip or twist to remove the old bulb from its socket. Handle with care as it may be hot.
4. Lắp bóng đèn LED mới: Carefully insert the Philips Ultinon Access LED H7 bulb into the headlight socket. The ultra-compact design facilitates easy fitting. Ensure it is seated correctly and securely.
5. Kết nối điện: Reconnect the electrical connector to the new LED bulb. The non-polarized design simplifies this step.
6. Lắp ráp an toàn: Reattach any covers or panels that were removed during the process.
7. Chức năng kiểm tra: Turn on your vehicle's headlights to verify that both LED bulbs are functioning correctly. Check both low beam and high beam (if applicable for H7).

Image 4.1: The ultra-compact design of the Philips Ultinon Access LED bulb allows for easy installation.

Image 4.2: Simple plug & play installation, no additional accessories needed.

5. Hướng dẫn vận hành

Once installed, operating your Philips Ultinon Access LED H7 bulbs is straightforward:

• Simply turn on your vehicle's headlights as you normally would.
• The LED bulbs will provide instant, bright white light at 6000 Kelvin, enhancing visibility and giving your vehicle a modern look.
• Experience up to 80% more brightness compared to minimum legal standards for halogen lamps, improving your view của con đường.

Image 5.1: Visual comparison of light output: Standard vs. Philips Ultinon Access LED.

Image 5.2: White light on the road for improved visibility.

6. Bảo trì

Philips Ultinon Access LED H7 bulbs are designed for long-lasting performance with minimal maintenance:

• Tuổi thọ: These LED bulbs have an operational lifespan of 1500 hours, which is significantly longer than traditional halogen bulbs.
• AirCool Technology: Integrated AirCool technology ensures consistent performance and contributes to the extended lifespan of the product by managing heat effectively.
• Vệ sinh: If necessary, gently wipe the bulb's exterior with a clean, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
• Không có bộ phận nào người dùng có thể tự sửa chữa: The bulbs do not contain any user-serviceable parts. Do not attempt to disassemble or modify the bulbs.

Image 6.1: Philips AirCool technology for prolonged bulb durability.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Philips Ultinon Access LED H7 bulbs, refer to the following common problems and solutions:

• Bóng đèn không sáng:
  • Check the electrical connection to ensure it is securely attached.
  • Verify that the bulb is correctly seated in the headlight socket.
  • Inspect your vehicle's fuse box for any blown fuses related to the headlights.
• Dashboard Error Messages (CANbus Issues):
  • Some modern vehicles have sensitive CANbus systems that may detect the lower power draw of LED bulbs as an error.
  • If you experience error messages on your dashboard, a separate CANbus adapter (resistor) may be required. These are typically sold separately and are not included with the bulbs. Consult your vehicle's manual or a professional for compatibility.
• Ánh sáng mờ hoặc nhấp nháy:
  • Ensure the bulb is fully inserted and locked into place.
  • Kiểm tra xem có mối nối nào bị lỏng trong hệ thống dây điện không.

If problems persist after attempting these troubleshooting steps, it is recommended to consult a qualified automotive technician.

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

For information regarding the warranty of your Philips Ultinon Access LED H7 headlight bulbs, please refer to the documentation provided with your purchase or visit the official Philips automotive lighting webtrang web. Điều khoản và điều kiện bảo hành có thể khác nhau tùy theo khu vực và nhà bán lẻ.

If you require technical support or have questions not covered in this manual, please contact Philips customer service or your authorized retailer. Contact information can typically be found on the Philips webbao bì sản phẩm hoặc trang web.

Tài nguyên trực tuyến: For additional information, product updates, and FAQs, please visit the official Cửa hàng thương hiệu Philips.