Giới thiệu
Welcome to the Greenlite Tier 1 Advanced Power Strip. This manual provides essential information for the safe and efficient use of your new power strip, designed to help you save electricity by intelligently managing power to your devices. By understanding its features and proper operation, you can optimize energy consumption and protect your electronics.
Sản phẩm trênview
The Greenlite Tier 1 Advanced Power Strip features 7 outlets and a 3-foot cord, offering 1440 Joules of surge protection. Its primary function is to reduce standby power consumption through its current-sensing technology. This allows for automatic power management of connected devices, turning off peripherals when the main device is powered down.
Hình ảnh: Từ trên xuống view of the Greenlite Advanced Power Strip, highlighting the different types of outlets and indicator lights.
Hướng dẫn an toàn
Vui lòng đọc và làm theo cẩn thận các hướng dẫn an toàn này để tránh bị thương hoặc hư hỏng.
- For indoor use only. Do not expose the power strip to moisture or extreme temperatures.
- Do not exceed the electrical ratings of the power strip. Overloading can cause overheating and fire.
- Ensure the power strip is plugged into a properly grounded outlet.
- Không được tháo rời hoặc sửa đổi ổ cắm điện. Mọi công việc bảo dưỡng phải do nhân viên có chuyên môn thực hiện.
- Keep children and pets away from the power strip.
- Avoid running the power cord under carpets or in high-traffic areas where it could be damaged.
Cài đặt
Tháo dỡ
- Cẩn thận lấy ổ cắm điện Greenlite Advanced Power Strip ra khỏi bao bì.
- Inspect the power strip for any signs of damage. If damaged, do not use and contact customer support.
- Giữ lại bao bì để bảo quản hoặc vận chuyển trong tương lai.
Kết nối ổ cắm điện
- Plug the power strip's cord directly into a standard, grounded wall outlet. Avoid using extension cords or other power strips in series.
- Ensure the power strip is placed on a stable, flat surface, away from heat sources or liquids.
Operating the Advanced Power Strip
The Greenlite Advanced Power Strip features three distinct types of outlets, each designed for specific device management:
Image: Diagram from product packaging explaining the function of each outlet type.
- 1. Always On Outlets: These outlets provide continuous power, regardless of the state of the Control Outlet. They are ideal for devices that need to remain powered at all times, such as modems, routers, and cable boxes.
- 2. Control Outlet: This is the central outlet for your primary device, such as a TV or computer. The power state of the device plugged into this outlet dictates the power to the Automatically Switched Outlets. When the device in the Control Outlet is turned off or enters a low-power state, the Automatically Switched Outlets will also power down.
- 3. Automatically Switched Outlets: These outlets receive power only when the device in the Control Outlet is actively drawing power. They are perfect for peripheral devices like speakers, printers, game consoles, or DVD players that you only need when your main device (e.g., TV) is in use.
How Current Sensing Works
The power strip utilizes load-sensing technology. It detects the current being drawn through the Control Outlet. When the primary device (e.g., TV) is turned on and drawing a significant amount of power, the power strip activates the Automatically Switched Outlets. When the primary device is turned off or goes into a low-power standby mode, the power strip senses the reduced current draw and cuts power to the Automatically Switched Outlets, thereby eliminating phantom load and saving energy.
BẢO TRÌ
Regular maintenance helps ensure the longevity and safe operation of your power strip.
- Vệ sinh: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners or abrasive materials.
- Điều tra: Periodically inspect the power cord and the power strip for any signs of damage, such as frayed wires, cracks, or discoloration. If any damage is found, discontinue use immediately and replace the unit.
- Thông gió: Ensure the power strip is not covered or placed in an enclosed space that could restrict airflow, as this can lead to overheating.
Xử lý sự cố
If you encounter issues with your Greenlite Advanced Power Strip, refer to the following common problems and solutions:
Ổ cắm điện không bật
- Kiểm tra ổ cắm trên tường: Đảm bảo ổ cắm trên tường hoạt động bằng cách cắm một thiết bị khác.
- Kiểm tra bộ ngắt mạch: Verify that the circuit breaker for the outlet has not tripped. Reset if necessary.
- Power Strip Reset: Some power strips have a reset button (often integrated with the circuit breaker). Press it firmly to reset.
Switched Outlets Not Functioning Correctly
- Control Outlet Device: Ensure the primary device plugged into the Control Outlet is fully powered on and drawing sufficient current. If the device is in standby or off, the switched outlets will not receive power.
- Khả năng tương thích của thiết bị: Some low-power devices may not draw enough current in the Control Outlet to trigger the switched outlets. Try a device with higher power consumption in the Control Outlet.
Clicking Sounds or Intermittent Power
Some users have reported clicking sounds or intermittent power from the switched outlets. This can occur if the device in the Control Outlet is not drawing a stable or sufficient amount of power, causing the power strip's internal relay to rapidly switch. Ensure the device in the Control Outlet is stable and drawing consistent power. If the issue persists, the unit may be faulty. Discontinue use and contact customer support.
Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Kích thước sản phẩm | 16 x 4.5 x 2 inch |
| Trọng lượng sản phẩm | 1.32 pound |
| Số hiệu mẫu | APS/T107M1S4/I01 |
| Tổng số ổ cắm điện | 7 |
| Tậptage | 240 vôn |
| Bảo vệ chống sét lan truyền | 1440 Joule |
| Chiều dài dây | 3 Ft. |
| Cắm điện Loại | Loại B - 3 chân (Bắc Mỹ) |
Bảo hành và Hỗ trợ
Greenlite products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Greenlite webđịa điểm.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Greenlite customer service. Contact details can typically be found on the product packaging or the manufacturer's webđịa điểm.
