Giới thiệu
This manual provides essential information for the safe and efficient operation and maintenance of your Maytronics Dolphin S200 Robotic Pool Cleaner. Please read it thoroughly before first use.

Image: The Maytronics Dolphin S200 Robotic Pool Cleaner, a compact and efficient device designed for automated pool cleaning.
Cài đặt
Setting up your Dolphin S200 is a straightforward process, as no assembly is required.
- Kết nối nguồn điện: Plug the Dolphin S200 into a suitable power source. Ensure the power outlet is protected and appropriate for outdoor use.
- Vị trí trong bể bơi: Carefully place the cleaner into the pool. Allow it to sink to the bottom.
- Initiate Cleaning: The cleaner is designed for automatic operation once powered on and submerged.
The unit operates on 24 Volts and is designed for ease of use with a touch control method.
Hướng dẫn sử dụng
The Dolphin S200 is designed for automated cleaning cycles. Once initiated, it will navigate and clean your pool surfaces efficiently.
- Hoạt động tự động: The robotic cleaner will automatically clean the pool floor and walls.
- Chu kỳ làm sạch: Allow the cleaner to complete its full cleaning cycle for optimal results.
- Xóa bỏ: Once the cycle is complete, carefully remove the cleaner from the pool using its handle.
BẢO TRÌ
Regular maintenance ensures the longevity and optimal performance of your Dolphin S200.
- Làm sạch bộ lọc: After each cleaning cycle, remove the filter from the top of the unit and empty any collected debris.
- Rửa sạch: Rinse the filter thoroughly with a hose to remove fine particles before the next use.
- Kho: Store the device in a cool, dry place when not in use to protect its components.
- Kiểm tra trước khi sử dụng: Before and after each use, visually inspect the cleaner for any signs of damage or wear.
Xử lý sự cố
Phần này cung cấp hướng dẫn về những vấn đề thường gặp mà bạn có thể gặp phải.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Cleaner not moving | Power supply issue, tangled cable, debris in brushes. | Check power connection, untangle cable, clean brushes. |
| Hiệu suất làm sạch kém | Full or dirty filter, worn brushes. | Clean or replace filter, inspect and replace brushes if necessary. |
| Chất tẩy rửa nổi | Air trapped inside, insufficient water saturation. | Submerge cleaner fully and gently shake to release trapped air. |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | MAYTRONICS |
| Tên mẫu | DOLPHIN S200 IG |
| Số hiệu mẫu sản phẩm | DOLPHIN S200 IG |
| ASIN | B08C1B23FD |
| Mã số UPC | 724131497941 |
| Yêu cầu lắp ráp | KHÔNG |
| Phương pháp kiểm soát | Chạm |
| Tậptage | 24 vôn |
| Hiệu quả | Tiết kiệm năng lượng |
| Loại cài đặt | Người máy |
| Vật liệu | ABS (Acrylonitrile Butadiene Styrene), Plastic |
| Nguồn điện | Pin chạy bằng |
| Tính năng đặc biệt | Nhẹ |
| Trọng lượng sản phẩm | 17 pound |
| Kích thước gói hàng | 22 x 18 x 14 inch |
Thông tin bảo hành
The Maytronics Dolphin S200 Robotic Pool Cleaner comes with a Bảo hành có giới hạn. For specific terms and conditions, please refer to the warranty card included with your product or contact Maytronics customer service.
Hỗ trợ khách hàng
For further assistance, technical support, or spare parts, please contact Maytronics customer service. Refer to the product packaging or the official Maytronics webtrang web để biết chi tiết liên hệ.
Bạn cũng có thể ghé thăm trang sản phẩm trên Amazon Để biết thêm thông tin và hỗ trợ khách hàng, vui lòng liên hệ với chúng tôi.views.





