JBL AM5212/66

Hướng dẫn sử dụng hệ thống loa chuyên nghiệp JBL AM5212/66

Medium Power 2-Way Loudspeaker System with 12-Inch LF, Black

1. Giới thiệu

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional AM5212/66 Medium Power 2-Way Loudspeaker System. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. Thông tin an toàn

Hướng dẫn an toàn quan trọng:

  • Đọc hướng dẫn này.
  • Hãy giữ những hướng dẫn này.
  • Hãy chú ý đến mọi cảnh báo.
  • Thực hiện theo mọi hướng dẫn.
  • Không sử dụng thiết bị này gần nước.
  • Chỉ lau sạch bằng vải khô.
  • Không chặn bất kỳ lỗ thông gió nào. Lắp đặt theo hướng dẫn của nhà sản xuất.
  • Không lắp đặt gần bất kỳ nguồn nhiệt nào như bộ tản nhiệt, thanh nhiệt, bếp lò hoặc các thiết bị khác (bao gồm amplò phản ứng) tạo ra nhiệt.
  • Chỉ sử dụng các phụ kiện/tập tin đính kèm do nhà sản xuất chỉ định.
  • Tham khảo mọi dịch vụ bảo dưỡng cho nhân viên bảo dưỡng có trình độ. Cần bảo dưỡng khi thiết bị bị hư hỏng theo bất kỳ cách nào, chẳng hạn như dây nguồn hoặc phích cắm bị hỏng, chất lỏng bị đổ hoặc có vật rơi vào thiết bị, thiết bị bị mưa hoặc ẩm ướt, không hoạt động bình thường hoặc bị rơi.

CẢNH BÁO: Sản phẩm này có chứa các hóa chất được biết đến với Tiểu bang California là gây ung thư và dị tật bẩm sinh hoặc tác hại sinh sản khác. Để biết thêm thông tin, hãy truy cập www.P65Warnings.ca.gov.

3. Nội dung gói hàng

Your JBL Professional AM5212/66 Loudspeaker System package should contain:

  • 1 x JBL Professional AM5212/66 Loudspeaker System
  • Hướng dẫn sử dụng này

4. Sản phẩm hếtview

The JBL Professional AM5212/66 is a medium power, 2-way, full-range loudspeaker system designed for professional audio applications. It features a 12-inch low-frequency driver and a high-frequency compression driver with a rotatable waveguide.

Đằng trước view of the JBL Professional AM5212/66 Loudspeaker System

Hình 4.1: Mặt trước view of the AM5212/66 Loudspeaker System with grille.

Đằng trước view of the JBL Professional AM5212/66 Loudspeaker System with grille removed, showing internal components

Hình 4.2: Mặt trước view of the AM5212/66 with grille removed, revealing the 12-inch LF driver and the high-frequency waveguide.

Các thành phần chính:

  • 262H-1 Differential Drive Low-Frequency Driver: A 300 mm (12 inch) driver designed for powerful and clear bass reproduction.
  • 2408H-1 High-Frequency Compression Driver: A 38 mm (1.5 inch) exit, 38 mm (1.5 inch) voice-coil compression driver for crisp and detailed high frequencies.
  • PT Progressive Transition Waveguide: Provides a 60° x 60° coverage pattern, ensuring consistent sound dispersion. This waveguide is rotatable for flexible installation.

5. Thiết lập và Cài đặt

5.1 Vị trí vật lý

Position the loudspeaker in a location that allows for optimal sound dispersion and coverage. Consider the room acoustics and the intended listening area. The AM5212/66 can be used in either vertical or horizontal orientation.

5.2 Waveguide Rotation

The PT Progressive Transition waveguide can be rotated to maintain the desired 60° x 60° coverage pattern when the loudspeaker is installed horizontally. Consult a qualified technician for instructions on safely rotating the waveguide to avoid damage to the components.

5.3 Kết nối

The rear panel of the AM5212/66 features input terminals for connecting to an ampBộ khuếch đại. Đảm bảo tất cả các kết nối đều chắc chắn và đúng cực.

Close-up of the input panel on the rear of the JBL Professional AM5212/66 Loudspeaker System

Figure 5.1: Close-up of the input panel, showing wiring options.

The input panel provides options for both passive and bi-amplified operation:

  • Chế độ thụ động: Kết nối của bạn amplifier to the terminals labeled for full-range input. The internal crossover network will distribute frequencies to the LF and HF drivers.
  • Sinh-Amp Cách thức: For advanced setups, separate amplifier channels can be used for the LF and HF drivers. Ensure an external crossover is used to properly divide the audio signal before amplification. Refer to the wiring diagram on the input panel for correct connections.

Always power off your amplifier before making or changing any connections to prevent damage to your equipment.

6. Hoạt động

The AM5212/66 is a passive loudspeaker and requires an external ampamply để hoạt động. Hãy đảm bảo amplifier is appropriately matched to the loudspeaker's power handling capabilities.

6.1 Bật / Tắt nguồn

Always power on your amplifier after all connections are made and power off the amplifier before disconnecting any cables. Start with the amplifier volume at its lowest setting and gradually increase it to the desired listening level.

6.2 đầu vào âm thanh

Kết nối nguồn âm thanh của bạn (bộ trộn, bộ tiền xử lý)amplifier, etc.) to your amplifier, and then connect the amplifier output to the loudspeaker's input terminals as described in Section 5.3.

7. Bảo trì

Proper maintenance ensures the longevity and performance of your loudspeaker system.

7.1 Vệ sinh

  • Use a soft, dry cloth to clean the exterior surfaces of the loudspeaker.
  • Không sử dụng chất tẩy rửa có tính mài mòn, dung môi hoặc hóa chất mạnh vì chúng có thể làm hỏng lớp hoàn thiện.
  • Avoid spraying liquids directly onto the speaker grille or drivers.

7.2 Lưu trữ

If storing the loudspeaker for an extended period, keep it in a cool, dry environment, away from direct sunlight and extreme temperatures. It is recommended to store it in its original packaging or a protective case to prevent dust and physical damage.

KHAI THÁC. Xử lý sự cố

If you experience issues with your AM5212/66 loudspeaker, refer to the following common troubleshooting steps:

Vấn đềNguyên nhân có thểGiải pháp
Không có âm thanh từ loa
  • Dây điện không đúng
  • Ampamply tắt hoặc bị lỗi
  • Vấn đề thiết bị nguồn
  • Check all cable connections and polarity.
  • Đảm bảo ampBộ khuếch đại đã được bật nguồn và đang hoạt động.
  • Kiểm tra xem nguồn âm thanh có đang phát và được kết nối đúng cách hay không.
Âm thanh bị méo
  • quá tải ampngười nói dối
  • Linh kiện loa bị hỏng
  • Ghép trở kháng không chính xác
  • Giảm bớt ampkhối lượng lifier.
  • Đảm bảo amplifier impedance matches speaker.
  • If distortion persists, contact JBL Professional support.
Âm lượng thấp
  • Ampâm lượng máy lọc quá thấp
  • Low input signal
  • Tăng ampTăng âm lượng amply dần dần.
  • Check output level from your audio source.

9. Thông số kỹ thuật

Detailed technical specifications for the JBL Professional AM5212/66 Loudspeaker System:

Tính năngChi tiết
Tên mẫuAM5212/66
Loại loaLoa toàn dải 2 chiều
Trình điều khiển tần số thấp262H-1 Differential Drive 12-Inch (300 mm)
Trình điều khiển tần số cao2408H-1 Compression Driver (1.5-inch exit, 1.5-inch voice-coil)
Mẫu bao phủ60° x 60° (Rotatable Waveguide)
Công suất đầu ra tối đa của loa150 Watt
Màu sắcĐen
Kích thước sản phẩm19 x 16 x 30 inch
Trọng lượng sản phẩm3.12 pounds (Note: This weight seems unusually low for a 12-inch professional speaker. Please verify with product documentation.)
Nhà sản xuấtJBL chuyên nghiệp
Mã số UPC691991005329
ASINB072LSBXF9

10. Thông tin bảo hành

JBL Professional products are designed and manufactured to the highest quality standards. This product is covered by a limited manufacturer's warranty. For specific warranty terms, conditions, and registration information, please refer to the warranty card included with your product or visit the official JBL Professional webtrang web. Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.

11. Hỗ trợ khách hàng

Để được hỗ trợ kỹ thuật, dịch vụ hoặc biết thêm thông tin sản phẩm, vui lòng liên hệ bộ phận hỗ trợ khách hàng của JBL Professional hoặc truy cập trang web chính thức của họ. webđịa điểm:

Tài liệu liên quan - AM5212/66

Trướcview Sách hướng dẫn sử dụng JBL 4367: Loa đứng 2 chiều 15 inch
Sách hướng dẫn sử dụng này cung cấp thông tin chi tiết về loa JBL 4367, loa đứng 2 chiều 15 inch. Tìm hiểu về cách thiết lập, bố trí, kết nối, điều khiển và bảo quản để có hiệu suất âm thanh tối ưu.
Trướcview Loa âm trần JBL Control 416C/T Standard Coverage Series - Thông số kỹ thuật
Thông số kỹ thuật chi tiết, tính năng và dữ liệu hiệu suất của JBL Control 416C/T, loa trần đồng trục hai chiều 6.5 inch được thiết kế cho các hệ thống âm thanh thương mại và chuyên nghiệp.
Trướcview Hệ thống rạp chiếu phim JBL 5000 Series: Hướng dẫn sử dụng và thông số kỹ thuật
Hướng dẫn sử dụng toàn diện cho Hệ thống rạp chiếu phim JBL dòng 5000, cung cấp chi tiết về cấu hình hệ thống, điều khiển kỹ thuật số, kết nối, yêu cầu về nguồn điện, vị trí đặt loa và thông số kỹ thuật cho các mẫu 5671, 5672 và 5674.
Trướcview Sách hướng dẫn sử dụng loa kiểm âm phòng thu 2 chiều 12 inch JBL 4349
Sách hướng dẫn sử dụng đầy đủ cho loa kiểm âm phòng thu JBL 4349 12 inch 2 chiều. Bao gồm thiết lập, bố trí, kết nối (dây đơn, dây đôi, dây đôi)amp), điều chỉnh, chăm sóc, thông số kỹ thuật chi tiết và thông tin nhà sản xuất.
Trướcview Loa đồng trục 2 chiều nhỏ gọn chống chịu mọi thời tiết JBL AWC82 - Thông số kỹ thuật và tính năng
Thông số kỹ thuật chi tiết, các tính năng chính, ứng dụng, dữ liệu hiệu suất và thông tin bảo hành của loa đồng trục nhỏ gọn chống chịu mọi thời tiết JBL AWC82 với củ loa trầm 8 inch.
Trướcview Hướng dẫn sử dụng loa kiểm âm phòng thu JBL 4309.
Sách hướng dẫn sử dụng dành cho loa kiểm âm phòng thu JBL 4309 6.5 inch 2 đường tiếng. Cung cấp hướng dẫn thiết lập, kết nối, bảo dưỡng và thông số kỹ thuật để đạt hiệu suất âm thanh tối ưu tại nhà.