1. Sản phẩm hếtview
The Prestan Collection of CPR training manikins provides a comprehensive solution for effective CPR instruction. This collection includes one Adult, one Child, and one Infant manikin, each equipped with an LED Rate Monitor to provide instant feedback on chest compression rate. The manikins also feature an audible clicking sound to indicate correct compression depth, ensuring students learn proper technique.
1.1. Những gì bao gồm
- 1 Prestan Adult CPR Manikin with LED Rate Monitor
- 1 Prestan Child CPR Manikin with LED Rate Monitor
- 1 Prestan Infant CPR Manikin with LED Rate Monitor
- 10 Adult Lung Bags
- 10 Child Lung Bags
- 10 Infant Lung Bags
- 1 Bảng hướng dẫn
- 1 Nylon Carrying Case
1.2. Các tính năng chính
- Integrated LED Rate Monitor for real-time compression rate feedback.
- Audible clicking sound for accurate compression depth feedback.
- Easy-to-insert Face Shield/Lung Bags for hygienic use.
- Durable construction designed for repeated training sessions.
- Portable nylon carrying case for convenient transport and storage.
Figure 1: The Prestan CPR Manikin Collection, showing the Adult, Child, and Infant manikins, along with the included lung bags and the blue carrying case.
Figure 2: The durable nylon carrying case for the Prestan Manikin Collection, designed for easy transport and storage of the manikins and accessories.
2. Thiết lập
Before using your Prestan CPR manikins, follow these steps for proper setup:
2.1. Lắp đặt pin
The LED Rate Monitor requires batteries (not included). Locate the battery compartment, typically on the back or side of the manikin's torso. Insert the required batteries, ensuring correct polarity. Close the compartment securely.
Note: Batteries are required for the LED Rate Monitor to function.
2.2. Lung Bag/Face Shield Installation
- Open the manikin's head to access the lung bag cavity.
- Carefully insert a new, clean lung bag into the cavity, ensuring it is properly seated.
- Align the face shield portion of the lung bag over the manikin's face, covering the mouth and nose area.
- Secure the head back into place.
- Ensure a tight seal around the mouth and nose for effective ventilation practice.
Important: Use a new lung bag for each student or training session for hygiene.
3. Hướng dẫn vận hành
The Prestan CPR manikins are designed to provide realistic feedback for effective CPR training.
3.1. Chest Compressions
- Position the manikin on a firm, flat surface.
- Locate the correct compression site on the manikin's chest.
- Perform chest compressions according to current CPR guidelines (rate and depth).
3.2. Feedback System
The manikins provide two primary forms of feedback:
- LED Rate Monitor: The LED lights on the manikin's shoulder/chest area indicate the rate of chest compressions.
- Red/Yellow Lights: Indicate compression rate is too slow or too fast.
- Đèn xanh: Indicate the compression rate is within the recommended range (typically 100-120 compressions per minute).
- Audible Clicker: An audible click will sound when the chest compressions reach the correct depth. This provides immediate confirmation of proper depth.
Hình 3: Cận cảnh view of the LED Rate Monitor on a Prestan manikin, showing the green, yellow, and red indicator lights that provide real-time feedback on compression rate.
3.3. Ventilations (Rescue Breaths)
- After performing compressions, tilt the manikin's head back to open the airway.
- Pinch the nose and deliver two rescue breaths into the manikin's mouth, observing for chest rise.
- The lung bag will inflate, simulating lung expansion.
4. Bảo trì
Proper maintenance ensures the longevity and hygiene of your Prestan CPR manikins.
4.1. Vệ sinh
- After each use, wipe down the manikin's surfaces with a mild soap and water solution or a disinfectant wipe.
- Ensure all surfaces are dry before storage.
- Do not submerge the manikins in water.
4.2. Lung Bag Replacement
Replace lung bags after each training session or as needed to maintain hygiene and proper function. Refer to Section 2.2 for installation instructions.
4.3. Lưu trữ
- Store manikins in the provided nylon carrying case in a cool, dry place away from direct sunlight.
- Remove batteries if the manikins will not be used for an extended period to prevent leakage.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| LED Rate Monitor not lighting up. | No batteries, dead batteries, or incorrect battery polarity. | Install new batteries or check battery orientation. |
| No audible clicker sound during compressions. | Compressions not deep enough. | Increase compression depth until the clicker sounds. Ensure manikin is on a firm surface. |
| Manikin chest not rising during ventilations. | Improper lung bag installation, airway not open, or poor seal around mouth/nose. | Re-install lung bag, ensure head tilt/chin lift is performed, and check for a tight seal. |
6. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Kích thước sản phẩm | 23 x 16.75 x 13.25 inch (đã đóng gói) |
| Trọng lượng sản phẩm | 16.9 Pounds (packaged) |
| Số hiệu mẫu | PP-FM-300M-MS |
| Nhà sản xuất | Prestan |
| Màu da | Trung bình |
| Nguồn điện | Pin (không bao gồm) |
7. Bảo hành và Hỗ trợ
7.1. Thông tin bảo hành
The Prestan CPR Manikin Collection comes with a Bảo hành có giới hạn 3 năm Từ nhà sản xuất. Bảo hành này bao gồm các lỗi về vật liệu và tay nghề trong điều kiện sử dụng bình thường. Vui lòng giữ lại hóa đơn mua hàng để yêu cầu bảo hành.
7.2. Hỗ trợ khách hàng
For technical assistance, replacement parts, or warranty inquiries, please contact Prestan customer service. Refer to the contact information provided on the original product packaging or the official Prestan webđịa điểm.
Manufacturer: Prestan
