VGN-logo

VGN S99 Mechanical Keyboard

VGN-S99-Mechanical-Keyboard-product

Specifications

  • Indicator light: Long indicator, CAPS indicator, Num indicator, WIN indicator
  • WIN key: Option key in MAC mode
  • ALT key: Command key in MAC mode
  • Windows/MAC mode switching: FN + A (Windows mode), FN + S (MAC mode)
  • 2.4G wireless connection
  • Bluetooth connection
  • Wired connection
  • Power management: Power check, Low battery alert, Charging method, Sleep function
  • FN combination key for multimedia shortcuts

Product Usage Instructions

2.4G Wireless Connection

  1. Remove the receiver from the housing slot by pressing the housing slot cover sheet.
  2. Plug the receiver into your computer’s USB port.
  3. Turn the mode switch on the bottom to 2.4G.

Bluetooth Connection

  1. Turn the mode switch on the bottom to Bluetooth mode.
  2. Long press FN + number keys 1, 2 or 3 to start pairing. The long indicator light will flash during pairing.
  3. Up to 3 devices can be paired. Press the FN + number keys 1, 2 or 3 to switch between devices.

Wired Connection

  1. Plug the USB-C cable into the port of the keyboard.
  2. Connect the cable to the computer.
  3. Turn the mode switch from the bottom to the middle.

Power Check
The power level can be checked by pressing FN + right CTRL. The power percentage will be displayed on the long indicator.

  • 100% – 40% power: bright green, green proportion represents the remaining power.
  • 40% – 20% power: bright yellow, and yellow represent the remaining power.
  • Less than 20% power: bright red, red proportion represents the remaining power.

Low Battery Alert
The bar indicator light will flash red when the battery is low.

Charging Method
In any mode, connecting the keyboard to the computer through the equipped data cable will charge the keyboard. While connected, press FN + right CTRL to view the charging status on the long indicator light. A green streamer indicates that it is charging, and a constant green light of the light bar indicates that it is full.

Sleep Function
In Bluetooth and 2.4G mode, the keyboard enters first-level sleep after 3 minutes of inactivity, and the backlight is turned off. After 10 minutes of inactivity, it enters second-level sleep, and Bluetooth/2.4G is disconnected. Press any key to immediately reconnect.

FN combination key

 

Multimedia shortcut key combination

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FN

Windows system    

MAC system

 

Remarks

 

ESC

Long press for 3 seconds to restore

factory settings

 
 

F1

 

My computer

 

Mac Single Press F1

 

F2

 

Home page

 

Mac Single Press F2

 

F3

 

Calculator

 

Mac Single Press F3

 

F4

 

Player

 

Mac Single Press F4

 

F5

 

Last song

 

Mac Single Press F5

 

F6

 

Next song

 

Mac Single Press F6

 

F7

 

Pause/Play

 

Mac Single Press F7

 

F8

 

Stop

 

Mac Single Press F8

 

F9

 

Mute

 

Mac Single Press F9

 

F10

 

Volume reduction

 

Mac Single Press F10

   

F11

 

Volume up

 

Mac Single Press F11

 

F12

 

Email

 

Mac Single Press F12

 

A

Switch to Windows mode  
 

S

Switch to MAC mode, see the button description for the

function.

 
 

Left WIN

Lock the WIN key, the WIN key cannot be

used when locked

 

WIN key white light indication

 

Right CTRL

 

Check battery

 
 

1

Switch to Bluetooth Device 1 and long press

Pair

 

Long indicator light flashing blue

 

2

Switch to Bluetooth Device 2 and long press

Pair

 

Long indicator light flashing purple

 

3

Switch to Bluetooth device 3 and long press

Pair

 

Long indicator light flashing cyan

 

4

Long press to pair 2.4G receiver  

Long bar light flashing green

 

Lighting efficiency control

 

 

 

 

 

 

 

 

 

 

 

FN

 

DEL

Turn off/turn on backlight (with

memory)

 
 

INS

 

Switch backlight effect

 
 

Backlight direction switching  
 

Quickly adjust the seven-color backlight  
 

Improved backlight brightness  
 

Backlight brightness reduction  
 

=+

Backlight speed increase  
 

-_

Backlight speed reduction  
 

SPACE

Backlight color switching Enter the color switching state, and all keys display different colors; after pressing a button color again, switch to the corresponding color, and the space bar
      is colorful RGB color
 

HOME

Switch bar indicator light effect  
 

\|

Long indicator color switch  
 

PGDN

Bar indicator brightness reduced  
 

PGUP

Bar indicator brightness increased  
  [{ Strip indicator speed reduced  
 

]}

Bar indicator speed increased  

Multimedia Shortcut Key Combination (Windows System)

  • ESC: No specific function
  • F1: My computer
  • F2: Home page
  • F3: Calculator
  • F4: Player’s Last song
  • F5: Player Next song
  • F6: Pause/Play
  • F7: Stop
  • F8: Mute
  • F9: Volume reduction

Multimedia Shortcut Key Combination (MAC System)

  • Long press F1 for 3 seconds to restore factory settings
  • Mac Single Press F1: Remarks Mac Single Press F1
  • Mac Single Press F2: Home page
  • Mac Single Press F3: Calculator
  • Mac Single Press F4: Player Last song
  • Mac Single Press F5: Player Next song
  • Mac Single Press F6: Pause/Play
  • Mac Single Press F7: Stop
  • Mac Single Press F8: Mute
  • Mac Single Press F9: Volume reduction

Button description

  • Indicator light:
  • Long indicator: Switchable display of light efficiency and power; low power and connection status prompts
  • CAPS indicator: Case-sensitive, always on when in uppercase.
  • Num indicator: Distinguish the locked state of the number keys, and always on when it is on.
  • WIN indicator: distinguish the locked state of the WIN key, the WIN key is always on when it is locked, and the WIN key cannot be used at this time.
  • WIN key: WIN key, cannot be used when locking the WIN key, and is the option key in MAC mode.
  • ALT key: ALT key, Command key in MAC mode
  • Windows/MAC mode
    • FN + A Switch to Windows mode
    • FN + S switch to MAC mode, F1-F12 buttons are multimedia buttons, FN + F1-F12 are regular inputs of F1-F12
    • when connecting to the Windows system, if switching to MAC mode, the WIN and ALT keys will be swapped, and F1-F12 are the multimedia keys

Lighting effect

  • Light customization function
  • Press FN +~ to invoke custom backlighting, only one set of custom memory lights is supported.
  • Custom light editing: After pressing Fn +~ to call the custom backlight, press Fn +~ again to start editing the light; at this time, the NUM CAPS light starts to blink, directly press the button to be defined, change a colour with each click, and edit Press Fn +~ again to save the edited light.

Long indicator light effect
The battery can be checked by FN + right CTRL. When the device is paired, the long indicator flashes quickly, and when connected back, the long indicator flashes slowly (2.4G green/BT1 blue/BT2 purple/BT3 cyan). After the pairing is successful, the normal lighting effect will be restored.

 

Mode

 

Brightness

 

Speed

 

Color switching

 

Streamer

 

 

 

 

Neon

   

 
 

Always bright

 

   

 

Breathe

 

 

 

 

Turn off the lights

     

Button backlight RGB light effect

 

Name

 

Adjustable content

 

Description

   

Brightness

 

Speed

 

Color

 

Direction

 
 

Always bright

 

   

   

Full keyboard light is always on display

 

Go with the flow

 

 

 

 

Wave-like light, flowing horizontally to the left or right
Judgment of Light  

 

    Full keyboard light solid color display, and slowly change color
 

Breathe

 

 

 

  The brightness of the full keyboard light varies according to the breathing curve
Colored clouds flying  

 

 

 

The light appears to flow like a cloud and flow horizontally
 

Peak turn

 

 

 

 

Lights flow around the center of the keyboard
 

A ripple

 

 

 

  After triggering the button, spread the display around the trigger point
Snow without a trace  

 

 

  After triggering the button, the light comes on and gradually goes out
Run away from the dust  

 

 

  After triggering the button, spread to both sides with the trigger point as the

center

A hundred flowers bloom  

 

 

  Button display with colorful or single color flashing display
Undercurrent surging  

 

 

  Random combination of lights, surge changes
Meteors chasing the moon  

 

 

  The lights follow the colorful and gradual change display, chasing each other
Dapeng spreads its wings  

 

 

  The light simulates Dapeng spreading its wings and waving up and down
The stream is endless  

 

 

  The light is interspersed with the surge display from left to right line by line
 

The rain is falling

 

 

 

  The lights simulate rain, falling from top to bottom
Both right and left  

   

  The light swings left and right, and the speed increases with the speed of the

button

 

United as one

    The color of the light deepens with the speed of the button
 

Fast passion

 

   

  The light spreads and closes in the center of the keyboard, and the speed increases

with the speed of the keys

When the WIN key is locked after pressing the FN + WIN key, the WIN key cannot be triggered for use. At this time, the WIN indicator on the keyboard is on, and it can be unlocked after pressing FN + WIN again. F1-F12 does not respond or becomes a function key After pressing FN + S, the keyboard will switch to MAC mode. At this time, under the Windows system, it will appear as the WIN key and the ALT key are swapped, and F1-F12 becomes the function key; press FN + A to switch back to Windows mode. Download the latest driver from VGN.CN/drive official website, you can customize keys, edit macros and modify RGB lighting effects through the driver software, and experience the full keyboard function

Other
Driver download and firmware upgrade, official account QR code

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement

  1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
  3. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body

Documents / Resources

VGN S99 Mechanical Keyboard [pdf] User Manual
S99 Mechanical Keyboard, S99, Mechanical Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *