Overview
The VEVOR Home Creator Way fixed rectangular table (Model ZH610) is intended for household and similar applications. Read the full manual before assembly and operation, and follow installation steps carefully to avoid losses from improper installation.
Specifications
| Model | ZH610 |
|---|---|
| Main Color | Brown |
| Safe Loading Weight | 150 LBS |
| Product Size (D*W*H) | 1800 * 800 * 750 mm |
| Net Weight | 32.6 KG |
| Compliance/Notes | Specifications and appearance may be modified without prior notice. |
Quick Setup & Use
- Before starting, read all manual instructions and keep the manual accessible.
- Check the labeled parts in the package (hardware and components) and keep them away from children.
- Assemble only according to the provided instructions; arrange and separate all parts in a clean work area.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly; keep the area clean, well-lit, and free of bystanders.
- Install the product on a clean and soft underlay (such as carpet or cardboard) to avoid scratching.
- Follow the assembly steps in the manual in order (Step 1–8). Do not move the product randomly until it is completely installed.
- After assembly, check that the product is not abnormal before use; stop using it if it is abnormal.
Upgrade · The Home Creator Way
Fixed Rectangular Table
Model: ZH610
VEVOR Support Center
Installation Video
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Safety Instructions
Introduction
Thank you for purchasing our products. Committed to providing customers with the best quality products and service has always been our lifelong goal. Before using the product, please read this instruction manual carefully to ensure correct use. Keep the instruction manual in a place where the user can find it at any time.
Assembly Precautions
There are many components and accessories in the package. Each component and accessory is labeled with a letter or a number, check carefully before using any of them. Keep them away from children to prevent accidents.
- Assemble only according to these instructions. Improper assembly may create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble if tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Please install the product on a clean and soft underlay (such as carpet or cardboard) to avoid scratching or damaging the surface of the product.
- If possible, you can use power tools to make assembly easier.
- The main components of the product are relatively heavy. Please pay attention to safety during installation.
- The product is not stable during installation. Please do not move it randomly before it is completely installed.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
*PLEASE BE SURE TO FOLLOW THE INSTALLATION STEPS IN THE MANUAL TO AVOID UNNECESSARY LOSSES CAUSED BY IMPROPER INSTALLATION.
Use Precautions
- The product complies with relevant standards and regulations. Installation of this device must comply with all applicable regulations, and it should only be operated in well-ventilated areas. Please read the user manual before installing and using this equipment.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This product is not a toy. Do not allow children to play with or near this item.
- This appliance is intended to be used in household and similar applications such as: Bedroom, hotel, homestay, guest room, office, etc.
- Please use the product according to the intended use. Potential injury may occur from misuse.
- Please properly store and maintain the product. Check whether the product is abnormal before use. If it is abnormal, please stop using it.
Parts List
| Hardware & Accessories | |||||
|---|---|---|---|---|---|
| A x6 +1 Screw (8X40) | B x24 +2 Washer (M6X10) | C x8 +1 Screw (M6X30) | D x8 +1 Screw (M6X40) | E x4 +1 Screw (M6X50) | F x8 +1 Screw (M6X60) |
| G x4 Foot Pad | H x1 L-shaped Bracket |
| Components | ||
|---|---|---|
| ① x 1 pc | ② x 2 pcs | ③ x 2 pcs |
| ④ x 2 pcs | ⑤ x 2 pcs | ⑥ x 2 pcs |
| ⑦ x 2 pcs | ⑧ x 4 pcs |
Assembly Steps
Step 1 & Step 2
Step 3 & Step 4
Step 5 & Step 6
Step 7 & Step 8
Product Parameters
| Model | ZH610 |
| Main Color | Brown |
| Safe Loading Weight | 150 LBS |
| Product Size (D*W*H) | 1800 * 800 * 750 mm |
| Net Weight | 32.6 KG |
* Specifications, appearance, and design of products are subject to modification without prior notice.
Troubleshooting
- Product is abnormal before/during use: Stop using the product and do not operate it until the issue is resolved.
- Scratching or surface damage risk during assembly: Assemble on a clean and soft underlay (such as carpet or cardboard) to help prevent damage.
- Unsafe or unstable during installation: The product is not stable during installation—do not move it randomly until it is completely installed, and ensure you assemble only as instructed.
- Missing/unclear parts: Verify that each component/accessory is labeled (letter/number) and check carefully against the parts list before assembly.
FAQ
- What should I do before operating the table?
- Read all manual instructions carefully before operating, keep the manual accessible, and ensure the product is properly assembled and not abnormal before use.
- What safety equipment should I wear during assembly?
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- How should I protect the product surface during assembly?
- Install/assemble the product on a clean and soft underlay (such as carpet or cardboard) to avoid scratching or damaging the surface.
- What is the safe loading weight for the table?
- The safe loading weight is 150 LBS.
Documents / Resources
 | ZH610 Fixed Rectangular Table |
References
- d2qc09rl1gfuof.cloudfront.net/product/GDJXBGZJYK704VREK001/fixed-rectangular-desk-iom1.mp4d2qc09rl1gfuof.cloudfront.net
- vevor.com/pages/contact-us/GDJXBGZJYK704VREK001V0www.vevor.com
- User Manualmanual.tools