Fixed Rectangular Table (Model: ZH607) Overview
This manual provides assembly guidance and safety precautions for the Fixed Rectangular Table, Model ZH607. Read all instructions carefully before use, assemble only as directed, and keep the manual available for future reference.
Product Specifications
| Model | ZH607 |
|---|---|
| Main Color | White |
| Safe Loading Weight | 350 LBS |
| Product Size (D*W*H) | 1600*800*750 mm |
| Net Weight | 19.8 kg |
Specifications, appearance, and design may be modified without prior notice.
Setup & Use (Quick Guide)
- Keep all labeled parts/accessories away from children; unwrap and separate all parts in a clean work area.
- Set up a clean, well-lit assembly area and prepare a clean, soft underlay (e.g., carpet or cardboard) to avoid scratching the surface.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Assemble the table only according to the manual installation steps; do not move the product randomly until it is completely installed.
- Before use, check whether the product is abnormal; if abnormal, stop using it.
Troubleshooting
- Unnecessary losses or issues after assembly: Ensure you follow the installation steps in the manual to avoid problems caused by improper installation.
- Product appears abnormal: Check the product before use; if it is abnormal, stop using it immediately.
- Scratches or surface damage during assembly: Install/assemble on a clean and soft underlay (such as carpet or cardboard) to prevent scratching or damaging the surface.
- Stability problems while assembling: The product is not stable during installation—do not move it randomly until it is completely installed.
FAQ
- What should I do before assembling the table?
- Read the manual instructions carefully before operating/using the product, then unwrap and separate all parts in a clean work area and check that components/accessories are labeled.
- Can I assemble the table any way I want?
- No. Assemble only according to the installation steps in the manual; improper assembly may create hazards.
- What should I do if the product is abnormal?
- Check whether the product is abnormal before use; if it is abnormal, stop using it.
- How should I protect the table surface during assembly?
- Install/assemble the product on a clean and soft underlay (such as carpet or cardboard) to avoid scratching or damaging the surface.
- What is the safe loading weight for the table?
- The safe loading weight is listed as 350 LBS.
Documents / Resources
 | ZH607 Fixed Rectangular Table |
References
- User Manualmanual.tools
Published: September 8, 2026