VEVOR XE-C2++ Mini Split Stand Installation Guide

MINI SPLIT STAND
MODEL: XE-C2++

<Picture Only For Reference >

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.
Avoid children using the product. And this product is not a toy. Do not allow children to play.

TECHNICAL PARAMETER

PACKAGE LIST

No.	Name	Picture	QTY
1	Longitudinal pole		4
2	Horizontal pole		4
3	Vertical pole		4
4	Support pole		4
5	Screw ::M8*20mm		20
6	Expansion screw: M8*70		4
7	Plastic cover		4
8	Buffer pad		8
9	Base		4
10	Mounting plate		4
11	Open end wrench:10-13		1
12	Washer M8		20
13	Manual		1

ASSEMBLY INSTRUCTIONS

Finished product graphics:

Step1: Assemble the longitudinal poles with horizontal poles to be a frame.

Step2: Assemble the base with the vertical pole, assemble them with the M8*20 screw, install the plastic cover.Step3: Assemble the group(1) and group(2) with M8*20 screw and M8 washer.Step4: Put the Support pole on the frame according to the AC size. Insert the mounting plate to the support pole.

Lock the screw with the mounting plate, do not fasten the screw first.

Then insert the mounting plate to the support pole, fasten the screw slowly.
Step5: Install the buffer pad onto the support pole, fasten the buffer pad according to the AC size.