VEVOR Washing machine bracket Instruction Manual

VEVOR Washing machine bracket

OVERVIEW

This bracket is intended to be assembled and used according to the provided instructions. Follow the assembly precautions, use the specified tool and assembly conditions, and observe the stated load limit and handling warnings.

Specifications

Quick Setup & Use

1. Read all instructions before operating.
2. Assemble strictly according to the instructions to avoid hazardous incorrect assembly.
3. Keep children and pets away during assembly.
4. Wear safety goggles and work gloves during assembly.
5. Prepare the Philips/Phillips screwdriver; if using power tools, slow down and stop when needed.
6. Separate and count all parts and hardware.
7. Assemble with two people.
8. After assembly, use only on stable, level surfaces and do not stand or climb on the stand.

INTRODUCTION

• This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
• The appearance of the product shall be subject to the product you received. Please forgive us; we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTION

Warning:

1. Do not allow children to climb on the unit. Not suitable for children under 14 years old to use the unit.
2. Keep children and pets away during assembly.
3. The product complies with relevant standards and regulations. Installation of this device must comply with all applicable regulations, and it should only be operated in well-ventilated areas.
   • Please read the user manual before installing and using this equipment.
4. Maximum load: 660lbs/ 299kg (Static load-bearing).
   • Use only on stable, level surfaces. Do not stand or climb on the stand.

ASSEMBLY PRECAUTIONS

1. Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous.
2. Please wear safety goggles and work gloves properly during assembly.
3. Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs, or medication.
4. Separate and count all parts and hardware.
5. Prepare the following tool: Philips head screwdriver.
6. If using power tools, please be careful to slow down and stop when needed.
7. Two people are required for assembly.
8. Follow the intended uses only. Do not sit or stand on the above.

Parts List

ASSEMBLY INSTRUCTION

Troubleshooting

• Concern about unsafe assembly: If you believe the product was assembled incorrectly, stop and reassemble strictly according to the instructions, since incorrect assembly could be hazardous.
• Missing or mismatched parts: If you are unsure whether parts/hardware are complete, separate and count all parts and hardware before continuing assembly.
• Tools not working as expected: If using power tools, reduce speed and stop when necessary; use the specified Phillips/Philips screwdriver for the process described in the manual.
• Load/surface issues: Ensure the bracket is used only on stable, level surfaces and that the maximum static load (660 lbs / 299 kg) is not exceeded. Do not stand or climb on the stand.