VEVOR STD12B Binding Machine

Technical Support and E-Warranty Certificate www.vevor.com/support

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

WARMING & ATTENTIONS

• Read this operation manual carefully before using.
• Keep the machine separately from children.
• Keep the machine away from fire and liquid.
• Put the machine on a stable and safe place in order to prevent if from falling or causing any injury to people or the machine itself.
• Test the machine with some scrap paper before formally punching and binding, to make sure whether the position is correct to punch.
• Take out the surplus parts from the packing box. Put the machine on balanced and safe place to avoid falling off or causing any injury to people or the machine.
• Operate the machine strictly as per the manuals especially pay attention to the max Punching and binding capacity.
• Please test the machine before you punch the official documents. When punching the plastic covers, we suggest that the cover should be clipped between two pieces of paper.
• Please don’t use the machine to punch hard materials such as metals to avoid damage to the machine.
• When clamping the plastic ring, please don’t put your fingers inside this area, otherwise, you will get hurt.
• Max punch capacity: 10-12 sheets (Paper Thickness: 80g(<20lb) paper) Note: If you use paper of other thickness, please reduce the paper according to the actual situation!
• For the first use, make a punch with blotting paper to suck up excess lube from the blade

STRUCTURAL REPRESENTATION

TECHNICAL SPECIFICATIONS

Punching Capacity:	12 Sheets (A4 80g)
Binding Capacity:	120 Sheets (A4)
Paper Margin:	3/5/7 mm
Square Holes:	34 holes
Square Hole Distance:	8.46mm
Square Hole Size:	4x4mm
Type of knife:	double knife
Paper Format:	A4 paper or smaller sizes
Machine Dimension:	370*245*260mm
N.W.:	4.9kg
Packing Dimension:	440*190*310mm
G.W.:	5.3kg

PARTS LIST

Parts Name	Quantity
Paper shelf	1 pc
Blotting paper	1 pc
Instructions	1 pc

OPERATING GUIDE

Place the machine on a steady and even place before using!

For the first use, make a punch with blotting paper to suck up excess lube from the blade.

1. Punching Operation
2. Binding Operation
   • Choose the Iron hoop according to the thickness of the document. The following form is for your reference to choose the proper Iron hoop.
     

     Wire size (mm)	Wire size (inch)	Max.Binding sheets	Wire size (mm)	Wire size (inch)	Max.Binding sheets
     4.8	3/16	15	11.1	7/16	95
     6.4	1/4	30	12.7	1/2	105
     7.9	3/8	75	14.3	9/16	120
     9.5	3/8	75
3. Clean up the waste bin
   • The waste bin, which is located at the back of the machine, is dedicated for the waste of punching. The frequency of cleaning up the waste bin depends on the frequency you use the machine.
     1. Pull out the waste bin from the back of the machine
     2. Pour the waste into the rubbish bin.
     3.  And insert the waste bin again.
        Please clean up the waste bin frequently!

PROBLEMS & SOLUTIONS

Problems	Reasons	Solutions
1. The handle couldn’t be pressed down when punching	Paper scraps or other hard materials  remain  inside the punch slot	Clean up the foreign matter
	Exceeding the max. punching capacity or use the other thickness of paper	Reduce the paper according to the actual situation
2. The paper margin is slanting	The paper is lopsided when inserting	Take out the paper and put it in again
	Paper scraps or other hard materials  remain  inside the punch slot	Clean up the foreign matter
3. Paper punching is impenetrable or hard to pull out the paper	Exceeding the max. punching capacity or use the other thickness of paper	Lessen the punching thickness or reduce the paper according to the actual situation (follow the manual)
4. The paper couldn’t touch the rack when inserting	The paper is dilapidated with rolled-up paper edges	Smooth the paper and put it in again

• Manufacturer: Shanghaimuxinmuyeyouxiangongsi
• Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
• Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
• Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• E-CrossStu GmbH
  Mainzer Landstr.69, 60329 Frankfurt am Main.
• YH CONSULTING LIMITED.
  C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Frequently Asked Questions

What should I do if I have product questions or need technical assistance?

Feel free to contact VEVOR for any product-related queries or technical support using the contact details provided on their website.

Documents / Resources

VEVOR STD12B Binding Machine [pdf] Instruction Manual STD12B Binding Machine, STD12B, Binding Machine

References

• User Manual