SSXG004 Box Style Cat Trees
“
Specifications:
- Model: SSXG004
- Product: Box Style Cat Trees
- Manufacturer: VEVOR
Product Usage Instructions:
Safety Instructions:
WARNING: Read this material before using this
product. Failure to do so can result in serious injury.
- Assemble only according to the provided instructions.
- Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly. - Keep the assembly area clean, well-lit, and free from
bystanders. - Do not assemble when tired or under the influence of
substances. - Assemble on a flat, level, hard, and smooth surface capable of
safely supporting the product. - Do not sit or stand on the item.
- Do not allow children to play with or near the product.
- Inspect before every use; do not use if parts are loose or
damaged.
Accessories:
The product comes with accessories including door stoppers,
sisal columns, cushions, spring toys, doorknob toys, furball toys,
anti-tipping rope, rotating shaft, adjustable footrest, screws,
screwdriver, and wrench.
Installation Steps:
- Step 1: Install the adjustable foot pad on the
base as illustrated. - Step 2: Use the three-in-one screw
installation method as shown in the figure. - Step 3: Assemble the bottom cabinet first as
shown in the figure.
FAQ:
Q: Can children play with the Box Style Cat Trees?
A: No, this product is not a toy, and children should not play
with or near it for safety reasons.
Q: What should I do if parts are loose or damaged?
A: Do not use the product if any parts are loose or damaged.
Inspect before every use and replace any faulty components.
“`
Technical Support and E-Warranty Certificate www.vevor.com/support
BOX STYLE CAT TREES USER MANUAL
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:SSXG004
BOX STYLE CAT TREES
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
1
SAFETY INSTRUCTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions 1. Assemble only according to these instructions. Improper assembly can
create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs
or medication. 6. The product capabilities apply to properly and completely assembled
products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Box Style Cat Trees. 8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this
item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely
support a fully loaded Box Style Cat Trees. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
2
Accessories table
A×1 D×1
B×1 E×1
C×1 F×1
G×1
H×1
I×1
J×1
K×1
L×1
(Door stopper)
M×1
N×2
O×2
*Each set comes with a screwdriver and wrench
3
Accessories table
(Sisal columns) 30cm
(Wrap the column) 26cm
30cm
33cm
1 ×1 (cushion)
2 ×1 (cushion)
3 ×4
4 ×1
(cushion)
5
6
(Spring toys)
(doorknob) (Furball toys)
7 (Anti-tipping rope) (Rotating shaft)
S×1
U×2
(Adjustable footrest)
V×1
X×1 2
(3-in-1 screws)
X2×2
W×1 (M6*40)
Y×4 (M4*22)
Z×4 (M4*12)
T1 x12
Q1x16 (M8*30)
T2 x5 4
Q2x4
Q3x2
(M8*70)
(M3*12)
T3 x4
T4 x16
Installation Steps
Step 1
A
Install the adjustable foot pad on the base as illustrated;
Z
A
Zx4
T1X12
Step 2
The three-in-one screw installation method is shown in the figure;
B J
D
Step 3
As shown in the figure,
O
assemble the corresponding
door stopper and the small
black nose U;
U N
C T4
Y
Assemble the bottom cabinet first as shown in the figure;
Note: Align the holes before tightening Q1X12
Put the spindle plate first, and then put the hinge Place on the door and tighten the screws;
T4x16
Q3x2
B
C
D
J
Nx2
Yx4
Ox2
Ux2
5
Step 4
I
G
Q2
5
Step 5
7 3
T3
E F
H
I H
Insert the I plate and H plate into the top groove of the cabinet;
Assemble the cat nest above the cabinet as shown in the figure, and finally put the mat 5 into it;
5
Q1X4
Q2X4
E
F
G
H
I
3 3
3 1
K
M
Use the lead screw T3 screw to fix the hammock;
As shown in the figure, the hammock M and the corresponding column are installed, and finally the mat 7 is put on;
T2x4
T3x4
M
K
7
6
Step 6
6 L
Plug the expansion pipe into the wall, and then
fix the anti-tipping rope on the wall with self-tapping wire; Finally, use screws to fix the other side to the cat climbing frame.
4
2
walls
W S
X1 V
X2
The foot pad at the bottom can be rotated to adjust the height; Attach the hairball toy and spring toy, and after all parts are installed, you can tighten the screws to fix them.
S
V X1 X2
7
7
W
T2x1
Model Colour Product Size
PRODUCT PARAMETER
SSXG004 Brown
580*500*1400mm
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.
UK
REP
YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
8
Technical Support and E-Warranty Certificate www.vevor.com/support
Documents / Resources
 |
VEVOR SSXG004 Box Style Cat Trees [pdf] User Manual SSXG004, SSXG004 Box Style Cat Trees, SSXG004, Box Style Cat Trees, Style Cat Trees, Cat Trees |