SSXG001 Box Style Cat Trees
“
Specifications
- Model: SSXG001
- Product: Box Style Cat Trees
Product Information
The Box Style Cat Trees provide a safe and interactive
environment for your feline friends to play, rest, and exercise.
The product is designed with high-quality materials to ensure
durability and stability.
Product Usage Instructions
Safety Instructions
WARNING: Read all safety instructions carefully
before using the product to prevent serious injury.
- Assemble the product according to the provided instructions to
avoid hazards. - Wear ANSI-approved safety goggles and work gloves during
assembly. - Ensure the assembly area is clean, well-lit, and free of
bystanders. - Do not assemble when tired, under the influence of substances,
or medication. - Assemble on a flat, level, hard surface capable of supporting
the cat trees securely. - Inspect the product before each use and do not use if any parts
are loose or damaged.
Assembly Instructions
Follow these steps for proper assembly:
- Install the cat bed assembly as per the provided
illustration. - Follow the three-in-one screw installation method shown in the
manual. - Install the base and post as illustrated, then place the mat on
it. - Assemble plank B first, secure the cat nest assembly with Q2
screws, and place the mat accordingly. - Always align the holes before tightening any screws.
Accessories
Each set includes a screwdriver, wrench, cushion, and sisal
columns of various sizes for customization.
FAQ
Q: Can children play on or near the Box Style Cat Trees?
A: No, this product is not a toy. Children should not play on or
near it for safety reasons.
Q: Can I exceed the specified weight capacities?
A: No, it is important to adhere to the specified weight
capacities to ensure the stability and safety of the product.
Q: What should I do if I notice loose or damaged parts?
A: Do not use the product and contact technical support
immediately for assistance in replacing or repairing the damaged
parts.
“`
Technical Support and E-Warranty Certificate www.vevor.com/support
BOX STYLE CAT TREES USER MANUAL
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:SSXG001
BOX STYLE CAT TREES
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
1
SAFETY INSTRUCTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions 1. Assemble only according to these instructions. Improper assembly can
create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs
or medication. 6. The product capabilities apply to properly and completely assembled
products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Box Style Cat Trees. 8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this
item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely
support a fully loaded Box Style Cat Trees. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
2
Accessories table
A×1 D×1
B×1 E×1
C×1 F×1
G×1
H×1
I×1 (Furball toys)
J×2 (Spring toys) (Anti-tipping rope) (cushion)
K×1
L×1 (cushion)
N×1
W×1
O×2
P×2
*Each set comes with a screwdriver and wrench
3
Accessories table
(cushion)
(Sisal columns) 40cm
45cm
50cm
Y×1 (Wrap the column)
14.3cm 25cm
1
34.1cm 38cm
2
40cm
3
50cm
4
5
6
7
(3-in-1 screws)
(M6*40)
8 ×2
9 ×2
(M8*30)
(M8*70)
Q1x4
Step 1
E F
Q2x4
C
Install the cat bed assembly as illustrated;
4
T2 x12
T3 x5
D
The three-in-one screw installation method is shown in the figure;
G
C E
D Q1X4
F
G
Installation Steps
Step 2
9
3
P 9
5
Step 3
Install the base and post as illustrated,
A
and then put the mat P on it;
P
A
Step 4
J T2X5
4 2
8
8
Y
B
As shown in the figure, assemble plank B first, then fix the cat nest assembly with Q2 screws, and finally put the mat Y in;
Note: Align the holes before tightening
Y
B
Q2X4
Assemble the corresponding columns as shown in the figure;
T3x2 T2x3
5
Step 5
O I
Step 6
6
K
Wooden plank I and hammock K are installed as shown in the figure, and finally cushion O is put on;
T2x2
T3x2
K
I
O
O H 1
Install the plank H and the corresponding post as shown in the figure, and finally put the mat O on
T2x1 H
T3x1 O
6
Step 7
J
Plug the expansion pipe into the wall, and then fix the anti-tipping rope on the wall with self-tapping wire; Finally, use screws to fix the other side to the cat climbing frame.
walls
W
Anti-dumping rope placed position
P
7 N
N
Attach the hairball toy and spring toy, and after all parts are installed,
you can tighten the screws to fix them.
T2x1
P
J
N
N
W
7
Model Colour Product Size
PRODUCT PARAMETER
SSXG001 Burlywood 600*600*1750mm
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
8
Technical Support and E-Warranty Certificate www.vevor.com/support
Documents / Resources
 |
VEVOR SSXG001 Box Style Cat Trees [pdf] User Manual SSXG001 Box Style Cat Trees, SSXG001, Box Style Cat Trees, Style Cat Trees, Cat Trees |