VEVOR SR191632-1 Rattan Console Table

Product Usage Instructions

• Assemble according to the provided instructions.
• Wear safety goggles and work gloves during assembly.
• Ensure the assembly area is clean, well-lit, and on a flat surface.
• Keep bystanders away during assembly.
• Avoid assembly when tired, under the influence of alcohol, drugs, or medication.
• Product capabilities apply to properly assembled products only.
• Assemble on a flat, level, hard, and smooth surface capable of supporting the table.
• Refer to the Assembly Diagram for additional information on the parts listed in the manual

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Rattan Console Table.
8. For additional information regarding the parts listed on the following pages, please refer to the Assembly Diagram in this manual. Unwrap and separate all parts in a clean work area.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy. Do not allow children to play with or near this item.
2. Do not exceed weight capacities before moving.
3. Use only on a flat, level, hard ,and smooth surface capable of safely supporting a fully loaded Rattan Console Table.
4. Use as intended only. Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Products such as specifications, appearance, and design are subject to modification without prior notice

PACKAGE CONTENTS

ASSEMBLY STEPS

WARNING!
IN ORDER TO PREVENT OVERTURNING, THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED.

COMPLETION

CONTACT

• Manufacturer: Shanghaimuxinmuyeyouxiangongsi
• Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
• Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
• Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• E-CrossStu GmbH
  • Mainzer Landstr.69, 60329 Frankfurt am Main.
• YH CONSULTING LIMITED.
  • C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
• Technical Support and E-Warranty Certificate www.vevor.com/support

FAQ

• Q: Can children play with the Rattan Console Table?
• A: No, this product is not a toy, and children should not be allowed to play with or near it.
• Q: What should I do if parts are loose or damaged?
• A: Do not use the table if any parts are loose or damaged. Contact technical support for assistance.
• Q: Is it necessary to wear safety goggles and work gloves during assembly?
• A: Yes, it is recommended to wear ANSI-approved safety goggles and work gloves to ensure safety during assembly.

Documents / Resources

VEVOR SR191632-1 Rattan Console Table [pdf] User Manual SR191632-1 Rattan Console Table, SR191632-1, Rattan Console Table, Console Table

References

• User Manual