VEVOR PP096 Mini Split Pad Instruction Manual

VEVOR PP096 Mini Split Pad

IMPORTANT INFORMATION

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

 WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.
Avoid children using the product. And this product is not a toy. Do not allow children to play.
Warning-To reduce the risk of injury, user must read instructions manual carefully.
The product complies with relevant standards and regulations. Installation of this device must comply with all applicable regulations, and it should only be operated in well-ventilated areas. Please read the user manual before installing and using this equipment.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall not play with the appliance.
Please properly keep product. Check whether the product is abnormal before use. If it is abnormal, please stop using it.
Please use the product according to the intended use, warn of potential injury from misuse.
Not suitable for environments with high humidity, explosive atmospheres, salt spray, acidic or alkaline conditions.

TECHNICAL PARAMETER

Parameter	Details
product name	Mini Split Pad
Model	PP096
Product size(mm)	985×500×90mm
Max load(kg/lbs)	181/400

PACKAGE LIST

No.	Name	Picture	QTY
A	Mini Split Pad		1
B	Manual		1

INSTRUCTIONS

1. The Mini Split Pad is the matching base for mini split, condenser and other outdoor equipment. And it should be placed on flat soil or hard surface. helps to reduce sliding of the equipment, leveling up the equipment.
2. The Mini Split Pad’s surface is flat, equipment can be directly installed on it .
   
3. The Mini Split Pad can work with anti-vibration pads for a perfect ground mounting.
   
4. The pad have 5 mounting holes underneath, it is drillable for securing the outdoor condenser units if necessary, drill through the holes from bottom to top surface.