VEVOR OT0 Switch Panel
This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning: To reduce the risk of injury, the user must read the instruction manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be. discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
SAFETY INSTRUCTION
WARNING: Auxiliary off-road lights FOR OFF-HIGHWAY USE ONLY. Do not operate on public roads, may violate local traffic laws.
WARNING: Turn OFF all switches after vehicle shutdown to prevent battery drain. WARNING: High-intensity light may cause eye damage. Do not stare directly into lamp.
WARNING: Disconnect vehicle battery before wiring installation to avoid short circuit & fire hazard.
WARNING: Do not overload circuit; risk of overheating & fire.
NOTICE: Turn off extra lights during oncoming traffic to prevent glare accidents.
- Model
- OT070
- OT095
- OT094
- OT095
- OT070
- Rated Voltage
- DC12-24V 60 A
- Product Specifications
- 12 Buttons
- 4 Buttons
- 6 Buttons
- 4 Buttons
- 12 Buttons
PACKING LIST
PRODUCT FEATURES
Control 12 auxiliary LED lights or electrical devices. Colorful LED background lighting. Lighting mode control: Press and hold for 3 seconds; the background light automatically switches colors. Automatic Backlight brightness adjustment ON/OFF switch or momentary press operation80 Labels/stickers/decals design+ DIY
SWITCH PANEL INDICATION
BACKLIT BRIGHTNESS DIMMABLE
The back lit brightness of the switch panel is automatically dimmable according to the brightness variation of the surroundings/ environment.
In tunnels or other dark places, the switch panel will be dim, reducing the impact on the driver’s vision.
On the road or in other bright places, the switch panel will be brighter, make you control it more easier.
80PCS REUSABLE SWITCH L ABELS
- Thoroughly clean the switch panel.
- Peel off the lable and firmly press down on the switch panel.
- Multi-function labels for DIY your specific needs. (80 icons)
CONTROL PANEL WORKING MODE
lighting modes for you to choose from, and different colors represent different working modes:
Red: Toggle; Blue: Momentary; Green: Pulsed; Blue: Momentary. Press & hold to tum on the light and release to turn off the light.
LIGHTING MODE SETTING
The red indicator light is on when the switch panel is on. When you select the mode, the indicator will show the color of the corresponding function.
MOUNTING THE CONTROL BOX
TWO different installation methods are available:
Fix mount bracket Flush mount The ideal mounting of the control box should low for an unobstructed path for the power wires, accessory wires and the control harnesses included. If you decide to drill, please check the clearance behind the dilling location. Make sure you are not going to drill through and damage any wiring harnesses and components of the vehicle.
Fix Mount
Using the mounting bracket as a guide, find a good and desired location to mount the control box.
Flush Mount
Using the control box as a guide, find a good and desired location to mount.
SWITCH PANEL MOUNTING
TWO different installation methods are available mounting bracket angleis adjustable:
Angle adjustable mount bracket flush mount bracket Attach the switch panel to the mount bracket you need, then use the supplied screw accessories to fix the bracket. The ideal thickness of the mounting surface should be between 1/8″ to 1/4″. Check to make sure the control wire and extension plug&play wire is long enough to mount the desired location. Check the clearance behind the installation location. Make sure you are not going to drill through and damaged any wires and components of the vehicle. Once you decide where to mount, use the bracket to mark the drill location. After the installation of the panel, proceed to the wiring installation.
Angle Adjustable Mount
Flush Mount
SWITCH ASSEMBLY WIRING DIAGRAM
High Temperature Malfunction Indicator If the operating temperature of the equipment exceeds the system set value, the indicator light at the center of the control board illuminates, accompanied by a buzzing alarm. The system locks up and shuts down automatically. When the temperature drops below the preset threshold, the indicator light turns off, the buzzing sound ceases, and the system resumes normal operation. Single Circuit Malfunction Indicator: A red light next to the fuse clip lights up in the event of a single circuit failure.
Connect to 12 auxiliary LED lights or electrical devices
Total power will go to 1000W at 12V, 1500W at 24V and the maximum current is 80A. The maximum output current of ground 1&7 is 30A, the maximum output current of ground 2/3/8/9 is 20A. The maximum output current of ground 4/5/10/11 is 10A. The maximum output current of ground 6&12 is 5A. 1/2/3/4/ 5/ 6/8/ 9/ 10/ 11/ 12 The designed maximum output current is 20A. The maximum output current of ground 1&7 is 40A. Make sure all the lamps are correctly before connecting the power cable.
Model: OT095 PACKING LIST
PRODUCT FEATURES
Control 4 auxiliary LED lights or electrical devices. Colorful LED background lighting. Lighting modes control-Toggle/Momentary/Pulsed.Press and hold for 3 seconds; the background light automatically switches colors. Automatic + Manual Backlight brightness adjustment ON/OFF switch or momentary press operation80Labels / stickers/decals design + DIY
SWITCH PANEL INDICATION
BACKLIT BRIGHTNESS DIMMABLE
The back lit brightness of the switch panel is automatically dimmable according to the brightness variation of the surroundings/ environment.
In the tunnel or other dark places, the switch panel will be dim, reducing the impact on the driver’s vision.
On the road or other bright places, the switch panel will be brighter, making it easier to control.
80PCS REUSABLE SWITCH L ABELS
- Thoroughly clean the switch panel.
- Peel off the lable and firmly press down on the switch panel.
- Multi-function labels for DIY your specific needs. (80 icons)
CONTROL PANEL WORKING MODE
Lighting modes for you to choose from, and different colors represent different working modes:
Red: Toggle; Blue: Momentary; Green: Pulsed; Blue: Momentary. Press & hold to tum on the light and release to turn off the light.
OFF/ON: Press 2 times continuously to enter the setting mode (the indicator blinks continuously for 26 times). Press the function key to switch the function on the key
LIGHTING MODE SETTING
The red indicator light is on when the switch panel is on. When you select the mode, the indicator will show the color of the corresponding function.
MOUNTING THE CONTROL BOX
TWO different installation methods are available:
Fix mount bracket Flush mount The ideal mounting of the control box should low for an unobstructed path for the power wires, accessory wires and the control harnesses included. If you decide to drill, please check the clearance behind the dilling location. Make sure you are not going to drill through and damage any wiring harnesses and components of the vehicle.
Fix Mount
Using the mounting bracket as a guide, find a good and desired location to mount the control box.
Flush Mount
Using the control box as a guide, find a good and desired location to mount.
SWITCH PANEL MOUNTING
Attach the switch panel to the mount bracket you need, then use the supplied screw accessories to fix the bracket. The ideal thickness of the mounting surface should be between 1/8″ to 1/4″. Check to make sure the control wire and extension plug&play wire is long enough to mount the desired location. Check the clearance behind the installation location. Make sure you are not going to drill through and damage any wires and components of the vehicle. Once you decide where to mount, use the bracket to mark the drill location. After the installation of the panel, proceed to the wiring installation.
Angle Adjustable Mount
Flush Mount
SWITCH ASSEMBLY WIRING DIAGRAM
High Temperature Malfunction Indicator If the operating temperature of the equipment exceeds the system set value, the indicator light at the center of the control board illuminates, accompanied by a buzzing alarm. The system locks up and shuts down automatically. When the temperature drops below the preset threshold, the indicator light turns off, the buzzing sound ceases, and the system resumes normal operation. Single Circuit Malfunction Indicator: A red light next to the fuse clip lights up in the event of a single circuit failure.
Connect to 4 auxiliary LED lights or electrical devices
Total power will go to 600w at 12V, 1200W at 24V and the maximum current is 60A. The maximum output current of ground 4 is 30A; the maximum output current of ground 1-3 is 20A. The recommended connection method is to increase the current gradually from ground 1 to ground 4. Make sure all the lamps are correctly before connecting the power cable.
Model: OT094 PACKING LIST
PRODUCT FEATURES
Control 6 auxiliary LED lights or electrical devices. Colorful LED background lighting. Lighting modes control-Toggle/Momentary/Pulsed.Press and hold for 3 seconds; the background light automatically switches colors. Automatic + Manual Backlight brightness adjustment ON/OFF switch or momentary press operation 80 Labels/stickers/decals design + DIY
SWITCH PANEL INDICATION
BACKLIT BRIGHTNESS DIMMABLE
The back lit brightness of the switch panel is automatically dimmable according to the brightness variation of the surroundings/ environment.
In the tunnel or other dark places, the switch panel will be dim ,reduce the impact on the driver’s vision.
On the road or other bright places, the switch panel will be brighter, making it easier to control.
80PCS REUSABLE SWITCH L ABELS
- Thoroughly clean the switch panel.
- Peel off the label and firmly press down on the switch panel.
- Multi-function labels for DIY your specific needs. (80 icons)
CONTROL PANEL WORKING MODE
Lighting modes for you to choose, and different colors represent different working modes:
Red: Toggle; Blue: Momentary; Green: Pulsed; Blue: Momentary. Press & hold to tum on the light and release to turn off the lights.
LIGHTING MODE SETTING
The red indicator light is on when the switch panel is on.When you select the mode, the indicator will show the color of the corresponding function.
MOUNTING THE CONTROL BOX
TWO different installation methods are available:
Fix mount bracket Flush mount The ideal mounting of the control box should low for an unobstructed path for the power wires, accessory wires and the control harnesses included. If you decide to drill, please check the clearance behind the dilling location. Make sure you are not going to drill through and damage any wiring harnesses and components of the vehicle.
Fix Mount
Using the mounting bracket as a guide, find a good and desired location to mount the control box.
Flush Mount
Using the control box as a guide, find a good and desired location to mount.
SWITCH PANEL MOUNTING
Attach the switch panel to the mount bracket you need, then use the supplied screw accessories to fix the bracket. The ideal thickness of the mounting surface should be between 1/8″ to 1/4″. Check to make sure the control wire and extension plug&play wire is long enough to mount the desired location. Check the clearance behind the installation location. Make sure you are not going to drill through and damage any wires and components of the vehicle. Once you decide where to mount, use the bracket to mark the drill location. After the installation of the panel, proceed to the wiring installation.
Angle Adjustable Mount
Flush Mount
SWITCH ASSEMBLY WIRING DIAGRAM
High Temperature Malfunction Indicator If the operating temperature of the equipment exceeds the system set value, the indicator light at the center of the control board illuminates, accompanied by a buzzing alarm. The system locks up and shuts down automatically. When the temperature drops below the preset threshold, the indicator light turns off, the buzzing sound ceases, and the system resumes normal operation. Single Circuit Malfunction Indicator: A red light next to the fuse clip lights up in the event of a single circuit failure.
Output Connections
Connect to 6 auxiliary LED lights or electrical devices
Total power will go to 600w at 12V, 1200W at 24V and the maximum current is 60A. The maximum output current of ground 6 is 30A, the maximum output current of grounds 4 & 5 is 20A. The maximum output current of ground 2&3 is 10A. 1. 2. 3. 4. 5 The designed maximum output current is 20A. The designed maximum output current of ground 6 is 30A. Make sure all the lamps are connected before connecting the power cable.
VEVOR Support Center
Documents / Resources
 | OT0 Switch Panel |
References
- User Manualmanual.tools