VEVOR Level Tripod Instruction Manual

VEVOR Level Tripod

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

1. Warning-To reduce the risk of injury, user must read instructions manual carefully.
2. The product complies with relevant standards and regulations. Installation of this device must comply with all applicable regulations, and it should only be operated in well-ventilated areas. Please read the user manual before installing and using this equipment.
3. The Contractor Aluminum Tripod should be mounted on a stable surface. Do not overload.
4. The installation should be done by an adult, and children should not use it without supervision.
5. Regularly check the stability and safety of the hanger, and stop using it immediately if there is any damage or suspected problem.
6. Please read and understand this manual carefully before using the Contractor Aluminum Tripod .
   Tip Over Hazard
   • A child or adult can tip the Contractor Aluminum Tripod and be killed or seriously injured.
   • Serious injury may occur to children and adults if not secured before installation.
   • Children should not play with or around the Contractor Aluminum Tripod at any time.
7. Do not exceed the maximum load capacity of 20 lbs (approx. 9 kg). Overloading may cause the tripod to collapse, resulting in serious injury. Before each use, check that the tripod is stable and that all locking knobs and quick-release clamps are securely fastened.
8. When using the tripod, ensure the restriction chain is kept straight to prevent the legs from over-extending and causing tip-over.
9. Use the plastic ball pads indoors and the metal needles outdoors to ensure stability on different surfaces.
10. Before mounting instruments, adjust the leg lengths to center the level bubble, ensuring measurement accuracy.
11. Before transport, fully retract and secure the tripod to prevent accidental extension during transit, which may cause damage or injury.
12. Before use, please ensure that the tripod and accessories are not damaged, and the connection parts are firm and reliable.
13. Do not use the tripod in bad weather conditions, such as strong wind, heavy rain, etc.
14. Do not use the tripod on unstable ground, such as soft soil, sand, etc.Do not expose the tripod to high temperature, humidity and other harsh environments, so as not to affect the performance.
15. Do not put the tripod under strong impact or vibration to avoid damage. In the process of use, if you find any abnormal tripod, please stop using immediately and contact us in time.

Product Introduction
Tripod is used to support and fix the level of the auxiliary equipment, suitable for various types of level measurement and positioning work, with stable support performance, can improve the measurement accuracy and efficiency, is an important tool for engineering measurement and construction.

Part list

• Tripod 1pcs
• Manual 1pcs

Usage Method

• STEP1:Set the tripod at eye level and tighten screw A.
• STEP2:After adjusting the tripod roughly level, fix the three feet to the ground.
• STEP3:Place the instrument on frame head B and secure it with center screw.
• STEP4:Adjust the hand wheel to center the blisters.

Maintenance Method

• Check the tripod connection and support parts regularly to ensure that they are not loose or damaged.
• Clean the surface and connection of the tripod regularly to keep it clean and tidy.
• If the tripod is found to have scratches or damage, it should be repaired or replaced in time.
• When not in use for a long time, the tripod should be properly stored to avoid moisture and dust affecting the use of performance.

Troubleshooting

• If the tripod cannot be expanded or folded, check whether the connection part is loose or damaged.
• If it is found that the tripod support is not firm or the measurement accuracy does not meet the requirements, check whether the height, Angle and position of the tripod are adjusted properly.
• If the level cannot be installed or is not securely connected, check whether the connection part is loose or damaged.
• If you find any other abnormal conditions, please contact the post-sale service center for help.