VEVOR ECO450 Mini Split Stand Instruction Manual

VEVOR ECO450 Mini Split Stand

TECHNICAL PARAMETER

MINI SPLIT STAND

MODEL: ECO450

This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us if we do not inform you again if there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property. Avoid children using the product. This product is not a toy. Do not allow children to play.

Package list

• Rubber pad (Qty: 2)
• M8*30 bolt (Qty: 4)
• Washer 22 × 1.5 mm (Qty: 4)
• Nut M8 (Qty: 4)
• Manual (Qty: 1)

ASSEMBLY INSTRUCTIONS

• Step1: Insert two M8*30 bolts into the groove of each rubber pad.
• Step2: Adjust the distance between the two rubber pads to fit the AC. Install the AC where its legs go into the bolts, then install the M8 washers and nuts.

Troubleshooting

• Problem: Rubber pads do not fit the air conditioner.
  Guidance: Adjust the distance between the two rubber pads so they match the air conditioner before installing the unit.
• Problem: Air conditioner legs/pad feet do not align with the bolts.
  Guidance: Reposition the air conditioner so that its legs/pad feet insert into the bolts, then install the M8 washers and nuts.