VEVOR E045C-H Mini Split Stand Instruction Manual

VEVOR E045C-H Mini Split Stand

Overview

VEVOR Mini Split Stand model series (E043C-H, E043C-1, E045C-H) is a floor-standing support frame intended for mounting a mini split system. Read the manual fully before operation, and keep children away from the product.

Specifications

Quick Setup / Use

1. Insert the foot plate into the vertical pole and install it using an M8 washer and an M8 self-locking nut; lock them together.
2. Repeat Step 1 to complete installation of four vertical poles.
3. Install the four vertical poles on the frame and lock them with washers and cup nuts.
4. Put the two support poles on the frame and install four sets of M8 washers, M8*16 screws, and M8 self-locking nuts.
5. Install four buffer pads on the support poles using an M8 washer, M8*25 screws, and M8 self-locking nuts.

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

WARNING

Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.Avoid children using the product. And this product is not a toy. Do not allow children to play.

TECHNICAL PARAMETER

PACKAGE LIST

ASSEMBLY INSTRUCTIONS

Step 1
Insert the foot plate into the vertical pole, install with M8 washer and M8 self-locking nut, lock them together.

Step 2
Repeat step1, finish the installation of four vertical poles.

Step 3
Install the 4 vertical poles with the frame, lock with washers and cup nuts.

Step 4
Put the two support poles on the frame, install 4 sets of M8 washer, M8*16 screw and M8 self-locking nut.

Step 5
Install 4 buffer pads on the support poles, install M8 washer, M8*25 screw and M8 self-locking nut.

Troubleshooting

• Children safety: If children are present, ensure they do not use or play with the product; the manual states the product is not a toy.
• Manual updates/appearance differences: If the product appearance differs from the manual, follow the instructions in the manual for assembly; the manual notes appearance may vary and that updates may occur without further notice.